RSS订阅当前栏目 下载首页| 国家标准 | 行业标准 | 国外标准 | 书籍手册 | 软件工具 | 最新更新 | 下载排行 | 网站地图 | 高级搜索 | 按月归档
文档搜索： （不可包含符号 “ / ”） 搜索帮助？
您的位置:首页 > 标准资料网 栏目分类 > 按月归档
[2013年01月更新标准免费下载] |　 13161   首页 上一页 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 下一页 尾页
  • ISO 1925-2001 机械振动 平衡 词汇
  • ISO 2032-1973飞机的耐热设备金属丝
  • ISO 2060-1994 纺织品.卷装纱线.线密度(单位长度的质量)的测定
  • ISO 2061-1995 纺织品.纱线捻度的测定.直接计数法
  • ISO 2062-1993 纺织品--从包装抽取纱线--单端断裂力和断裂伸长的测定
  • ISO 2063-2005 热喷镀.金属涂层和其他无机覆层.锌、铝及其合金
  • ISO 2093-1986 Electroplated coatings of tin - Specification and test methods
  • ISO 2162-1-1993 技术产品文献.弹簧.第1部分简图
  • ISO 225-1983 紧固件 螺栓、螺钉、螺柱和螺母 尺寸代号和标注
  • ISO 228-1-2000 Pipe threads where pressure-tight joints are not made on the threads - Part 1 Dimensions, tolerances and designation
  • ISO 228-2-1987 Pipe threads where pressure-tight joints are not made on the threads; Part 2 Verification by means of limit gauges
  • ISO 230-52000 机床试验规则第5部分噪声排放的测定
  • ISO 262-1998 一般用途米制螺纹.螺钉,螺栓和螺母的选用尺寸
  • ISO 281-2007 Rolling bearings - dynamic load ratings and rating life
  • ISO 301-1981 锌合金铸锭
  • ISO 492-2002 滚动轴承 向心轴承 公差
  • ISO 53-1998 通用和重型机械用圆柱齿轮基本齿廓
  • ISO 62-2008 Plastics-Determination of water absorption
  • ISO 65-1981
  • ISO 657-1-1989 热轧型钢的尺寸.第1部分等边角钢.米制系列.尺寸和截面特性
  • ISO 683-1-1987 热处理钢、合金钢和易切削钢.第1部分按照不同成形的黑钢制件直接硬化的非合金钢和低合金锻钢
  • ISO 683-11-1987 热处理钢、合金钢和易切削钢.第11部分锻造表面硬化钢 Heat-treatable steels, alloy steels and free-cutting steels; Part 11 Wrought case-hardening steels
  • ISO 683-14-2004 热处理钢、合金钢和易切钢 第14部分淬火回火弹簧用热轧钢
  • ISO 683-15-1992 热处理钢、合金钢和易切削钢.第15部分内燃机气门用钢 Heat-treatable steels, alloy steels and free-cutting steels; part 15 valve steels for internal combustion engines
  • ISO 683-17-1999 热处理钢、合金钢和易切削钢.第17部分球轴承和滚动轴承钢 Heat-treated steels, alloy steels and free-cutting steels - Part 17 Ball and roller bearing steels
  • ISO 683-18-1996 热处理钢、合金钢和易切削钢.第18部分非合金和低合金钢光亮产品 Heat-treatable steels, alloy steels and free-cutting steels - Part 18 Bright products of unalloyed and low alloy steels
  • ISO 724-1993 ISO一般用途米制螺纹.基本尺寸
  • ISO 815-1-2008Rubber, vulcanized or thermoplastic -Determination of compression set -- Part 1 At ambient or elevated temperatures
  • ISO 815-2-2008Rubber, vulcanized or thermoplastic - Determination of compression set -- Part 2 At low temperatures
  • ISO 898-1-2009 中文版 碳钢和铸钢铸造的紧固件机械性能 第1部分：螺栓
  • ISO 898-1-2009 碳钢和铸钢铸造的紧固件机械性能 第1部分：螺栓
  • ISO 899-1-2003 Plastics - Determination of creep behaviour - Part 1 Tensile creep
  • MSS SP-25-1998 中文版 阀门、管件、法兰和管接头的标准标记方法
  • MSS SP-25-1998
  • MSS SP-44-96(R2001) 中文版 钢制管道法兰
  • MSS SP-45-1998 中文版 旁通和排放连接
  • MSS SP-45-2003E
  • MSS SP-53-1999(R2002) 中文版 阀门.法兰.管件和其他管道部件用铸钢件和锻钢件质量标准-磁粉检验方法
  • MSS SP-54-1995 中文版 阀门、法兰、管件和其他管道部件用铸钢件质量标准—射线照相检验方法
  • MSS SP-54-1999
  • MSS SP-55 2006 阀门.法兰.管件和其他管道部件用铸钢件和锻钢件质量标准-表面缺陷评定的目视检验方法
  • MSS SP-6-2001 中文版 管法兰及阀门和端法兰的接触面标准精度
  • MSS SP-6-2007 管法兰以及阀门和管件端法兰的接触面标准精度
  • MSS SP-61-1992 钢制阀门的压力试验
  • MSS SP-61-1999
  • MSS SP-61-2003 中文版 钢制阀门压力试验
  • MSS SP-65-1994 中文版 用透镜垫的高压法兰和螺纹短管
  • MSS SP-67-1995
  • MSS SP-67-2002 中文版 蝶阀 BUTTERFLY VALVES
  • MSS SP-67-2002a Butterfly Valves
  • MSS SP-68-1997
  • MSS SP-69-2003 Pipe Hangers and Supports - Selection and Application
  • MSS SP-70-1998
  • MSS SP-71-1997
  • MSS SP-72 BALL VALVES WITH FLANGED OR BUTT-WELDING ENDS FOR GENERAL SERVICE[1].
  • MSS SP-73-2003 铜和铜合金钎焊连接管件用铜焊接头
  • MSS SP-75-2004 中文版 优质钢制对焊管件规范
  • MSS SP-79-2004 Socket Welding Reducer Inserts
  • MSS SP-80-1997
  • MSS SP-80-2003 青铜闸阀、截止阀、角阀和止回阀
  • MSS SP-80-2008 青铜闸阀、截止阀、角阀和止回阀
  • MSS SP-81-2001
  • MSS SP-82-1992
  • MSS SP-83-2001
  • MSS SP-85-2002 法兰端和螺纹端灰铸铁截止阀和角阀 GRAY IRON GLOBE &ANGLE VALVES FLANGED AND THREADED ENDS
  • MSS SP-9-1992 中文版 青铜、 铁和钢法兰锪平标准
  • MSS SP110 1996
  • MSS SP117 1996
  • MSS SP118 1996
  • MSS SP120 1997
  • MSS SP43 2001
  • MSS SP44 2001
  • MSS SP53 2002
  • MSS SP55-2001
  • MSS SP78 1998
  • MSS SP81 2001
  • MSS SP83 2001
  • MSS SP91 1996
  • MSS SP93 1999
  • IEEE 1547.1-2005 带电力系统的设备互连配电资源的合格试验程序
  • IEEE 1561-2007 远程混合电力系统中酸性铅蓄电池的性能和寿命的优化用指南
  • IEEE 1562-2007 单机光电(PV)设备中串联电池及电池尺寸用指南
  • IEEE 1578-2007 固定蓄电池电解质溢出处理和管理的推荐实施规程
  • IEEE 1580-2001 船用电缆的使用及安装方法
  • IEEE 1588-2008 IEEE Standard for a Precision Clock Synchronization Protocol for Networked Measurement and Control Systems
  • IEEE 1615-2007 Network Communication in Electric Power Substations
  • IEEE 1620-2008 Standard for Test Methods for the Characterization of Organic Transistors and Materials
  • IEEE 1624-2008 IEEE Standard for Organizational Reliability Capability
  • IEEE 1625-2008 IEEE Standard for Rechargeable Batteries for Multi-Cell Mobile Computing Devices
  • IEEE 1631-2008 IEEE Recommended Practice for Measurement of 8-VSB Digital Television Transmission Mask Compliance for the USA
  • IEEE 1633-2008 IEEE Recommended Practice on Software Reliability
  • IEEE 1636-2009 IEEE Trial-Use Standard for Software Interface for Maintenance Information Collection and Analysis (SIMICA)
  • IEEE 1647-2008 IEEE Standard for the Functional Verification Language e
  • IEEE 1725-2006 Standard for rechargeable batteries for cellular telephones
  • IEEE 1725-2006 移动电话用可再充电电池标准IEEE Standard for Rechargeable Batteries for Cellular Telephones
  • IEEE 1776-2008 IEEE Recommended Practice for Thermal Evaluation of Unsealed or Sealed Insulation Systems for AC Electric Machinery Employing Form-
  • IEEE P802.1AS-D4.0-2008 Draft Standard for Local and Metropolitan Area Networks—Timing and Synchronization for Time-Sensitive Applications
  • IEEE Special Publication TP-126-0, Series Capacitor Bank Protection
  • IEEE Standard Defitions of terms for solar cells
  • IEEE Std 1-2000 电子设备额定值中温度极限和电绝缘评定的一般原则
  • IEEE Std 100-2000 The Authoritative Dictionary of IEEE Standards Terms Seventh Edition
  • IEEE Std 101-1987 GUIDE FOR THE STATISTICAL ANALYSIS OF THERMAL LIFE TEST DATA
  • IEEE Std 108-1955 AIEE No.450-April 1955 Proposed Reconimeitded Guide for Specification of ELECTRONIC VOLTMETERS
  • IEEE Std 11 01.3-1993 IEEE Mechanical Standard for Conduction-Cooled and Air-cooled 10 SU Modules
  • IEEE Std 111-2000 宽带(大于1个十进位)变压器的标准
  • IEEE Std 112-1991 IEEE standard test procedure for polyphase induction motors and generators
  • IEEE Std 112-1996 Standard Test Procedure for Polyphase Induction Motors and Generators
  • IEEE Std 112-2004 IEEE Standard Test Procedure for Polyphase Induction Motors and Generators
  • IEEE Std 114-1982 IEEE standard test procedure for single-phase induction motors
  • IEEE Std 114-2001 IEEE standard test procedure for single-phase induction motors
  • IEEE Std 115-1983 IEEE guide test procedures for synchronous machines
  • IEEE Std 118-1978 Standard Test Code for Resistance Measurement
  • IEEE Std 119-1974 IEEE recommended practice for testing insulation resistance of rotating machinery
  • IEEE Std 120-1955 Master Test Code for Electrical Measurements in Power Circuits
  • IEEE Std 122-1985 IEEE Recommended Practice for Functional and Performance Characteristics of Control Systems for Steam Turbine-Generator Units
  • IEEE Std 125-2007 IEEE Recommended Practice for Preparation of Equipment Specifications for Speed-Governing
  • IEEE Std 141-1993 IEEE recommended practice for electric power distribution for industrial plants
  • IEEE Std 142-2007 IEEE Recommended Practice for Grounding of Industrial and Commercial Power Systems
  • IEEE Std 145-1983 IEEE Standard Definitions of Terms for Antennas
  • IEEE Std 145-1993 Standard Definitions of Terms for Antennas
  • IEEE Std 152-1991 IEEE standard for audio program level measurement
  • IEEE Std 155-1960 IEEE standards on circuits- definitions of terms for linear signal flow graphs
  • IEEE Std 167A-1987 IEEE standard facsimile test chart
  • IEEE Std 167A.2-1996 IEEE standard facsimile test chart：high contrast (gray scale)
  • IEEE Std 172-1983 IEEE standard definitions of navigation aid terms
  • IEEE Std 177-1966 Standard definitions and methods of measurement for piezoelectric vibrators
  • IEEE Std 18-1992 IEEE Standard for Shunt Power Capacitors
  • IEEE Std 18-2002 IEEE Standard for Shunt Power Capacitors
  • IEEE Std 181-2003 IEEE standard on transitions, pulses, and related waveforms
  • IEEE Std 183-1958 IEEE technical committee report- methods for testing radiotelegraph transmitters
  • IEEE Std 187-1990 IEEE standard on radio receivers open field method of measurement of spurious radiation from FM and television broadcast receivers
  • IEEE Std 194-1977 IEEE standard pulse terms and definitions
  • IEEE Std 205-2001 电视 亮度信号电平的测量
  • IEEE Std 208-1995 IEEE standard on video techniques： measurement of resolution of camera systems, 1993 techniques
  • IEEE Std 21-1976 General Requirements and Test Procedures for Outdoor Apparatus Bushings
  • IEEE Std 211-1997 IEEE standard definitions of terms for radio wave propagation
  • IEEE Std 241-1990 IEEE recommended practice for electric power systems in commercial buildings
  • IEEE Std 242-1986 IEEE Recommended Practice for Protection and Coordination of Industrial and Commercial Power Systems
  • IEEE Std 242-2001 errata Corrections to IEEE Recommended Practice for Protection and Coordination of Industrial and
  • IEEE Std 242-2001 IEEE Recommended Practice for Protection and Coordination of Industrial and Commercial Power
  • IEEE Std 259-1974(1980) IEEE Standard Test Procedure for Evaluation of Systems of Insulation for Specialty Transformers
  • IEEE Std 260.1-2004 IEEE Standard Letter Symbols for Units of Measurement (SI Units, Customary Inch-Pound Units, and Certain Other Units
  • IEEE Std 269-1992 IEEE standard methods for measuring transmission performance of analog and digital telephone sets
  • IEEE Std 270-2006 Standard Definitions for Selected Quantities, Units and Related Terms with Special Attention to the International System of Units
  • IEEE Std 272-1970 IEEE Standard for COMPUTER-TYPE (SQUARE-LOOP) PUL SE TRANSFORMERS
  • IEEE Std 277-1994 IEEE recommended practice for cement plant power distribution
  • IEEE Std 286-2000 IEEE Recommended Practice for Measurement of Power Factor Tip-Up of Electric Machinery Stator Coil Insulation
  • IEEE Std 287-2007 IEEE Standard for Precision Coaxial Connectors (DC to 110 GHz)
  • IEEE Std 295-1969 IEEE Standard for Electronics Power Transformers
  • IEEE Std 299-2006 Standard Method for Measuring the Effectiveness of Electromagnetic Shielding Enclosures
  • IEEE Std 303-1991 IEEE recommended practice for auxiliary devices for motors in class 1, groups A, B, C, and D, division 2 locations
  • IEEE Std 303-2004 IEEE Recommended Practice for Auxiliary Devices for Rotating Electrical Machines in Class I, Division 2 and Zone 2 Locations
  • IEEE Std 308-1991 IEEE standard criteria for class 1E power systems for nuclear power generating stations
  • IEEE Std 315-1975(R1993) IEEE Standard American National Standard Canadian Standard Graphic Symbols for Electrical and Electronics Diagrams
  • IEEE Std 317-1983 IEEE Standard for Electric Penetration Assemblies in Containment Structures for Nuclear Power Generating Stations
  • IEEE Std 32-1972 IEEE Standard Requirements, Terminology,and Test Procedure for Neutral Grounding
  • IEEE std 334-1994 IEEE Standard for Qualifying Continuous Duty Class 1E Motors for Nuclear Power Generating Stations
  • IEEE Std 334-2006 Standard for Qualifying Continuous Duty Class 1E Motors for Nuclear Power Generating Stations
  • IEEE Std 344-2004 IEEE Recommended Practice for Seismic Qualification of Class 1E Equipment for Nuclear Power Generating Stations
  • IEEE Std 37.91-2008 电力变压器继电保护导则
  • IEEE Std 4-1995 IEEE Standard Techniques for High-Voltage Testing
  • IEEE Std 43-2000 IEEE recommended practice for testing insulation resistance of rotating machinery
  • IEEE Std 43-2000(R2006) IEEE Recommended Practice for Testing Insulation Resistance of Rotating Machinery
  • IEEE Std 45-1998 IEEE recommended practice for electric installations on shipboard
  • IEEE Std 45-2002 船上电气装置的推荐实施规范
  • IEEE Std 48-1996 Alternating-Current Cable Terminations 2.5 kV Through 765 kV
  • IEEE Std 4a-2001 Amendment to IEEE standard techniques for high-voltage testing
  • IEEE Std 58-1978 IEEE Standard Induction Motor Letter Symbols
  • IEEE Std 62-2005 Guide for Diagnostic Field Testing of Electrc Power Apparatus Part 1 Oil Filled Power Transformers Regulators and Reactors
  • IEEE Std 67-2005 Guide for Operation and Maintenance of Turbine Generators
  • IEEE Std 80-2000 Guide for Safety in AC Substation Grounding
  • IEEE Std 81-1983 Guide for Measuring Earth Resistivity, Ground Impedance
  • IEEE Std 81.2-1991 Guide for Measurement of Impedance and Safety Characteristics of Large
  • IEEE Std 82-1994 IEEE standard test procedure for impulse voltage tests on insulated conductors
  • IEEE Std 82-2002 IEEE Standard Test Procedure for Impulse Voltage Tests on Insulated Conductors
  • IEEE Std 83-1963 Test Procedure for radial power factor tests on insulating tapes in paper-insulated power cable
  • IEEE Std 86-1987 IEEE Recommended Practiceefinitions of Basic Per-Unit Quantities for AC Rotating Machines
  • IEEE Std 94-1991 IEEE recommended definitions of terms for automatic generation control on electric power systems
  • IEEE Std 95-2002 带直流高压的交流电动机械(2300V及以上)的绝缘试验操作规程
  • IEEE Std 97-1969 IEEE recommended practice for specifying service conditions in electrical standards
  • IEEE Std 98-1984 IEEE Standard for the Preparation of Test Procedures for the Thermal Evaluation of Solid Electrical Insulating Materials
  • IEEE Std 98-2002 IEEE Standard for the Preparation of Test Procedures for the Thermal Evaluation of Solid Electrical Insulating Materials
  • NFPA 10-2010 Standard for Portable Fire Extinguishers
  • NFPA 11-1998 低中高倍数泡沫灭火系统标准
  • NFPA 11-2005 低、中、高膨胀泡沫系统标准
  • NFPA 11A-1999 中、高倍数泡沫灭火系统
  • NFPA 12-2005 二氧化碳灭火系统
  • NFPA 12-2008 Standard on Carbon Dioxide Extinguishing Systems
  • NFPA 12A-2004 卤代物1301灭火系统
  • NFPA 13-1999 中文版 撒水系统安装标准
  • NFPA 13-2007 Standard for the Installation of Sprinkler Systems
  • NFPA 13-2010 Standard for the Installation of Sprinkler Systems
  • NFPA 13D-1999 单户及双户住宅水喷淋管道系统的安装标准
  • NFPA 13D-2007 Standard for the Installation of Sprinkler Systems in One- and Two-Family Dwellings and Manufactured Homes
  • NFPA 13E-2000 Recommended Practice for Fire Department Operations in Properties Protected by Sprinkler and Standpipe Systems
  • NFPA 13R-1999 Installation of Sprinkler Systems in Residential Occupancies up to
  • NFPA 13R-2002 四层及四层以下的住宅的洒水系统的安装
  • NFPA 14-1996 Standard for the Installation of Standpipe and Hose Systems
  • NFPA 14-2007 Standard for the Installation of Standpipe and Hose Systems
  • NFPA 15-1996 Standard for Water Spray Fixed Systems for Fire Protection
  • NFPA 15-2001 防火用喷水固定系统
  • NFPA 15-2007 Standard for Water Spray Fixed Systems for Fire Protection
  • NFPA 16-1999 Standard for the Installation of Deluge Foam-Water Sprinkler Systems
  • NFPA 16-2007 泡沫水喷洒系统安装标准
  • NFPA 17-1998 Standard for Dry Chemical Extinguishing Systems
  • NFPA 17-2002 干化学试剂灭火系统
  • NFPA 17A-1998 Standard for Wet Chemical Extinguishing Systems
  • NFPA 17A-2009 Standard for Wet Chemical Extinguishing Systems
  • NFPA 18-1995 Standard on Wetting Agents
  • NFPA 18A-2007 Standard on Water Additives for Fire Control
  • NFPA 20-1999 消防固定水管的安装
  • NFPA 20-2007 消防固定水管的安装
  • NFPA 20-2007消防固定水管的安装
  • NFPA 20-2010 Standard for the Installation of Stationary Pumps for Fire Protection
  • NFPA 22-2003 专用防火储水罐
  • NFPA 24-2007 Standard for the Installation of Private Fire Service Mains and Their Appurtenances
  • NFPA 25-2002 水基灭火系统
  • NFPA 25-2008 水系消防系统的检查、测试和维护标准
  • NFPA 25H-2008 Water-Based Fire Protection Systems Handbook
  • NFPA 30-2000 Flammable and Combustible Liquids Code
  • NFPA 30-2008 Flammable and Combustible Liquids Code
  • NFPA 30A-2000 Code for Motor Fuel Dispensing Facilities and Repair Garages
  • NFPA 30A-2003 汽车修理站和船用码头规程
  • NFPA 30B-1998 Code for the Manufacture and Storage of Aerosol Products
  • NFPA 30B-2007 Code for the Manufacture and Storage of Aerosol Products
  • NFPA 31-2001 Standard for the Installation of Oil-Burning Equipment
  • NFPA 32-2000 Standard for Drycleaning Plants
  • NFPA 32-2007 Standard for Drycleaning Plants
  • NFPA 33-2007 Standard for Spray Application Using Flammable or Combustible Materials
  • NFPA 34-2000 Standard for Dipping and Coating Processes
  • NFPA 34-2007 Dipping and Coating Processes Using Flammable or Combustible Liquids
  • NFPA 35-1999 Standard for the Manufacture of Organic Coatings
  • NFPA 36-2001 Standard for Solvent Extraction Plants
  • NFPA 36-2004 溶剂萃取设备标
  • NFPA 37-1998 Standard for the Installation and Use of SCE AND GT
  • NFPA 37-2006 固定式内燃机和燃气涡轮机的安装和使用标准
  • NFPA 40-2007 硝酸纤维胶片的存储和处置标准
  • NFPA 42-1997 Code for the Storage of Pyroxylin Plastic
  • NFPA 42-2002 低氮硝化纤维素塑料的存储
  • NFPA 45-2004 使用化学品的实验室的防火
  • NFPA 50-1996 Standard for Bulk Oxygen Systems at Consumer Sites
  • NFPA 50-2001 Standard for Bulk Oxygen Systems at Consumer Sites
  • NFPA 50A-1999 Gaseous Hydrogen Systems at Consumer Sites
  • NFPA 50B-1999 Standard for Liquefied Hydrogen Systems at Consumer Sites
  • NFPA 51-2007 Standard for the Design and Installation of Oxygen–Fuel Gas Systems for Welding, Cutting, and Allied Processes
  • UL 101-2007 Standard for Leakage Current for Appliances
  • UL 104-2007 Standard for Elevator Door Locking Devices and Contacts
  • UL 109-2005 Standard for Tube Fittings for Flammable and Combustible Fluids, Refrigeration Service, and Marine Use
  • UL 10B-2008 Standard for Fire Tests of Door Assemblies
  • UL 10C-2009 Positive Pressure Fire Tests of Door Assemblies
  • UL 122-2001 Photographic Equipment
  • UL 122-2007 Standard for Photographic Equipment
  • UL 123-2007 Oxy-Fuel Gas Torches
  • UL 125-2007 Standard for Valves for Anhydrous Ammonia and LP-Gas (Other Than Safety Relief)
  • UL 127-2009 Factory-Built Fireplaces
  • UL 13-2003 Power-Limited Circuit Cables
  • UL 13-2005 Power-LimitedCircuitCables
  • UL 13-2007 Standard for Power-Limited Circuit Cables
  • UL 130-2001 Electric Heating Pads
  • UL 132-2007 Standard for Safety Relief Valves for Anhydrous Ammonia and LP-Gas
  • UL 136-2001 Pressure Cookers
  • UL 136-2004 Pressure Cookers
  • UL 136-2009 Pressure Cookers
  • UL 140-2008 Standard for Relocking Devices for Safes and Vaults
  • UL 141-2007 Standard for Garment Finishing Appliances
  • UL 142-1998 Steel Aboveground Tanks for Flammable and Combustible Liquids
  • UL 144-1999 LP-Gas Regulators
  • UL 153-2002 中文版 便携式照明电灯
  • UL 153-2005 Portable Electric Luminaires
  • UL 153-2006 Portable Electric Luminaires
  • UL 154-2007 Carbon-Dioxide Fire Extinguishers
  • UL 157-1999 密封垫和填料标准
  • UL 157-2007 Gaskets and Seals
  • UL 174-2009 Household Electric Storage Tank Water Heaters
  • UL 19-2001 Lined Fire Hose and Hose Assemblies
  • UL 20-2000 General Use Snap Switches
  • UL 20-2004 Standard for General-Use Snap Switches
  • UL 20-2008 Genernal-use snap switch
  • UL 21-2006 液化石油气软管标准
  • UL 21-2007 Standard for LP-Gas Hose
  • UL 30-2004 Standard for Metal Safety Cans
  • UL 30-2009 Metal Safety Cans
  • UL 32-2004 Standard for Metal Waste Cans
  • UL 32-2009 Metal Waste Cans
  • UL 44-2002 Thermoset Insulated Wires and Cables
  • UL 44-2005 Thermoset-Insulated Wires and Cables
  • UL 45-2000 Portable Electric Tools
  • UL 45A-2007 Transportable and Special Purpose Portable Electric Tools
  • UL 48-2001 Electric Signs
  • UL 48-2004 Standard for Electric Signs
  • UL 50-1999 电气设备的外壳
  • UL 50-2003 Enclosures for Electrical Equipment
  • UL 50-2003 Standard for Enclosures for Electrical Equipment
  • UL 50-2007 用于封闭空间的电动设备标准
  • UL 50E-2007 Enclosures for Electrical Equipment, Environmental Considerations
  • UL 50V-2007 INFRARED VIEWPORTS
  • UL 51-2002 Standard for Power-Operated Pumps for Anhydrous Ammonia and LP-Gas
  • UL 5A-2008 Nonmetallic Surface Raceways and Fittings
  • UL 5B-2009 Strut-Type Channel Raceways and Fittings
  • UL 5C-2007 Surface Raceways and Fittings for Use with Data, Signal, and Control Circuits
  • UL 6-2004 Electrical rigid metal conduit-steel
  • UL 62-2000 Flexible Cord and Fixture Wire
  • UL 62-2006 Flexible Cords and Cables
  • UL 65-2009 Wired Cabinets
  • UL 66-2002 Fixture Wire
  • UL 66-2005 Standard for Fixture Wire
  • UL 67-2006 Standard for Panelboards
  • UL 69-2006 Standard for Electric-Fence Controllers
  • UL 69-2009 Standard for Safety for Electric-Fence Controllers
  • UL 70-2001 Standard for Septic Tanks, Bituminous Coated Metal
  • UL 72-2001 Tests for Fire Resistance of Record Protection Equipment
  • UL 72-2005 证明防护设备耐火性试验的标准
  • UL 73-1998 Motor Operated Appliances
  • UL 73-2006 Standard for Motor-Operated Appliances
  • UL 79-2005 Standard for Power-Operated Pumps for Petroleum Dispensing Products
  • UL 8-2007 Water Based Agent Fire Extinguishers
  • UL 80 2007 Standard for Steel Tanks for Oil-Burner Fuel
  • UL 80-2004 Standard for Steel Tanks for Oil-Burner Fuel
  • UL 80-2008 Standard for Steel Tanks for Oil-Burner Fuel
  • UL 82-2007 Standard for Electric Gardening Appliances
  • UL 83-2001 Thermoplastic Insulated Wires and Cables
  • UL 83-2003 Thermoplastic-Insulated Wires and Cables
  • UL 83-2006 Thermoplastic-Insulated Wires and Cables
  • UL 83-2008 Thermoplastic-Insulated Wires and Cables
  • UL 9-2005 Standard for Fire Tests of Window Assemblies
  • UL 9-2009 Fire Tests of Window Assemblies
  • UL 94-1990 中文版 设备和器具部件用塑料材料的可靠性试验
  • UL 94-1998 设备和装置中塑料材料燃烧性试验标准
  • UL 94-2001 flammability for plastic
  • UL 94-2003 Tests for Flammability of Plastic Materials for Parts in Devices and Appliances
  • UL 94-2006 设备和装置中塑料材料燃烧性试验标准
  • UL 94-2009 Flammability of Plastic Materials for Parts in Devices and Appliances
  • UL 96-2005 Standard for Lightning Protection Components
  • UL 96A-2007 Installation Requirements for Lightning Protection Systems
  • UL 98-2004 Enclosed and Dead-Front Switches
  • UL 98-2006 Enclosed and Dead-Front Switches
  • BS 10-2009 Publishing and copyright information he BSI copyright notice displayed in this document indicates when the document was last issued.
  • BS 11-1985 铁轨规范
  • BS 12-1996 Specification for Portland Cement
  • BS 131.5-1965 Method for Notch Bar Test, Part 5 - Determination of Crystallinity
  • BS 143 and 1256-1986 Specification for malleable cast iron and cast copper alloy threaded pipe fittings.
  • BS 144-1-1990 wood preservation using coal tar creosote Part1 Specification for preservitive
  • BS 144-2-1990 wood preservation using coal tar creosote Part 2 methods for timber treatment
  • BS 148-1998 Specification for unused and reclaimed mineral insulating oils for transformers and switchgear
  • BS 148-2009 Reclaimed mineral insulating oil for transformers and switchgear. Specification
  • BS 159-1992 Specification for high-voltage busbars and busbar connections
  • BS 18-1987 Tensile testing of metals (including aerospace materials)
  • BS 182-1972 Specification for Galvanized line-wire for telephone and telegraph purposes
  • BS 183-1972 一般用镀锌钢丝多股绞合线规范Specification for general purpose galvanized steel wire strand
  • BS 21-1985 Pipe threads for tubes and fittings where pressure-tight joints are made on the threads
  • BS 29-1976 specification for carbon steel forgings above 150mm-ruling sections
  • BS 2A 57-1962 Specification for steel hexagonal-headed shear bolts (B.S.F. threads) for aircraft
  • BS 2HR 6-2010 镍-铬-铁-钼-钴-钨抗热合金坯料,棒材,锻件和零部件(镍基,Cr 21.7, Fe 18.5, Mo 9, Co 1.5, W 0.6)规范
  • BS 2TA 100-1973 锻造钛和钛合金的检验和试验规程.
  • BS 2TA 11-1974 Specification for bar and section for machining of titanium-aluminium-vanadium alloy
  • BS 302-5：1987 Stranded steel wire ropes. Specification for ropes for hauling purposes
  • BS 308-1-1984 Maritime Structures - General Criteria - Incorporates amendments
  • BS 308-1.10-1996 Technical drawings. Screw threads and threaded parts. General conventions
  • BS 308-1.11-1996 Technical drawings. Screw threads and threaded parts. Screw thread inserts
  • BS 308-1.12-1995 Technical drawings. Roller bearings. General simplified representation
  • BS 308-1.13-1997 Technical drawings. Roller bearings. Detailed simplified representation
  • BS 308-1.14-1995 Technical drawings. Seals for dynamic application. General simplified representation
  • BS 308-1.15-1995 Technical drawings. Seals for dynamic application. Detailed simplified representation
  • BS 308-1.16-1997 Technical drawing. Conventional representation of gears
  • BS 308-1.17-1996 Technical product documentation. Springs. Simplified representation
  • BS 308-1.18-1996 Technical product documentation. Springs. Presentation of data for cylindrical helical compression springs
  • BS 308-1.19-1996 Technical product documentation. Springs. Vocabulary
  • BS 308-1.20-1996 Technical drawings. Screw threads and threaded parts. Simplified representation
  • BS 308-1.23-1997 Technical drawings. Simplified representation of centre holes
  • BS 308-1.4-1995 Technical drawings. Scales. This Standard is part of the British Standards Online Service brought to you via IHS
  • BS 308-1.7-1996 Technical product documentation. Vocabulary. Terms relating to projection methods
  • BS 308-1.8-1995 Technical drawings. Item references. This Standard is part of the British Standards Online Service brought to you via
  • BS 308-1.9-1995 Technical drawings. Representation of splines and serrations. This Standard is part of the British Standards Online
  • BS 308-2-1985 Engineering drawing practice. Recommendations for dimensioning and tolerancing of size
  • BS 308-2.3-1996 Technical drawings. Dimensioning and tolerancing of profiles
  • BS 308-3-1990 Engineering drawing practice. Recommendations for geometrical tolerancing
  • BS 308-3.6-1995 Technical drawings. Symbols for geometrical tolerancing. Proportions and dimensions
  • BS 308-4.11-1996 Technical product documentation. Handling of computer-based technical information. Security requirements
  • BS 308-4.12-1996 Technical product documentation. Handling of computer-based technical information. Original documentation
  • BS 308-4.13-1996 Technical product documentation. Handling of computer-based technical information. Phases in the product design process
  • BS 308-4.14-1996 Technical product documentation. Handling of computer-based technical information. Document management and retrieval systems
  • BS 308-4.6-1995 Technical drawings. Simplified representation of pipelines. General rules and orthogonal representation
  • BS 308-4.7-1995 Technical drawings. Simplified representation of pipelines. Isometric projection
  • BS 308-4.8-1996 Technical drawings. Simplified representation of pipelines. Terminal features of ventilation and drainage systems
  • BS 336-1989 Fire hose couplings and ancillary equipment
  • BS 341.4-2004 移动式气瓶阀门 第4部分：压力泄放装置
  • BS 350-1-1974 Conversion factors and tables. Basis of tables. Conversion factors
  • BS 373-1957 无节疤小木材样品的试验方法
  • BS 381C-1996 Specification for colours for identification, coding and special purposes
  • BS 3F 128-2010 Specification for cotton webbing suitable for aerospace purposes (warp yarn nominally R 310 tex)
  • BS 3S 500-1996 Procedure for Inspection, testing and acceptance of steel sheet and strip
  • BS 4-1-1993 结构钢型材.热轧型钢规范
  • BS 4-1-2005 结构钢型材.热轧型钢的规范
  • BS 410-1-2000 试验用筛.技术要求和试验.金属丝网布试验用筛
  • BS 410-2-2000 Test sieves - technical requirements and testing. Test sieves of perforated metal plate
  • BS 416-1973 cast iron spigot and socket soil, waste and ventilating pipes
  • BS 417-2-1987 Specification for galvanized low carbon steel cisterns, cistern lids, tanks and cylinders. Part 2 Metric units
  • BS 427-1990 Method for Vickers hardness test and for verification of Vickers hardness testing machines
  • BS 434-1-1984 Bitumen road emulsions (anionic and cationic). Part 1 Specification for bitumen road emulsions
  • BS 434-2-1984 Bitumen road emulsions (anionic and cationic). Part 2 Code of practice for the use of cationic bitumen road emulsions
  • BS 436-4-1996 ISO 1328-1-1995 Cylindrical gears — ISO system of accuracy —Part 4
  • BS 437-2008 Specification for cast iron drain pipes, fittings and their joints for socketed and socketless systems
  • BS 443-1982 Specification for testing zinc coatings on steel wire and for quality requirements
  • BS 449-2-1969 Specification for the use of structural steel in building. Metric units
  • BS 46-1-1958 键和键槽及锥形销.键和键槽规范
  • BS 460-2002 铸铁雨水管件.规范
  • BS 476-12-1991 Fire tests on building materials and structures — Part 12 Method of test for ignitability of products by direct flame impingement
  • BS 476-15-1993 建筑材料和结构的燃烧试验.产品释热的测量方法
  • BS 476-1：1953 Fire tests on building materials and structures. Foreword
  • BS 476-20 1987 A1-1990 Fire tests on building materials and structures. Method for determination of the fire resistance of elements of construction
  • BS 476-20(1987) 建筑构件耐火的测定方法(一般原理)
  • BS 476-21-1987 Fire tests on building materials and structures. Methods for determination of the fire resistance of loadbearing elements of construction
  • BS 476-4-1970 Fire tests on building materials and structures. Non-combustibility test for materials
  • BS 476-5-1979 Method of test of ignitability
  • BS 476-6-2009 Fire tests on building materials and structures — Part 6 Method of test for fire propagation for products
  • BS 476-61989 Fire tests on building materials and structures. Method of test for fire propagation
  • BS 476-7-1997建筑材料和构件的燃烧试验 制品表面火势蔓延的试验和分级方法
  • BS 476-8-1972 Fire tests on building materials and structures第八部分
  • BS 489-1999 Specification for Turbine lubricants
  • BS 499-1-1991 Welding terms and symbols — Part 1 Glossary for welding, brazing and thermal cutting
  • BS 499-1-2009 Welding terms and symbols Part 1 Glossary for welding, brazing and thermal cutting
  • BS 499-2-1980 Welding terms and symbols part2 Specification for symbols for welding - Discuz! Board.
  • BS 499-2C-1999 International Relationships, ISO 2553 Not Equivalent. descriptors, Welded joints, Welding, Joints, Symbols
  • BS 4A 4 Pt1 Sec2 1967 No legislator may engage in lobbying, as that term is defined in ... (Source Laws
  • BS 500-2000 Steel sleepers
  • BS 5N 100-5-2006 航空器供氧系统和设备.包括搬运、储藏和补给与氧气相关的着火和爆炸危害指南
  • BS 64-1992 Specification for normal and high strength steel bolts and nuts for railway rail fishplates
  • BS 84-1956 中文版 惠氏牙型圆柱螺纹
  • BS 84-1956 惠氏直螺纹规范
  • BS 84-2007 Parallel screw threads of Whitworth form Requirements
  • BS 90-1975 Specification for direct-acting electrical recording instruments and their accessories
  • BS 91-1998 电缆焊接插座.规范
  • BS 93-1951 中文版 B.A.螺纹的尺寸规格 由0到16的公差
  • BS 93-2008 英国协会(B.A.)螺纹.要求
  • ASNT SNT-TC-1A-2001
  • ASNZS 1269.0-2005 Occupational noise management Part 0 Overview and general requirements
  • ASNZS 1269.1-2005 Occupational Noise Management Part 1 Measurement and Assessment of Noise Immission and Exposure
  • ASNZS 1269.2-2005 Occupational Noise Management Part 2. Noise Control Management
  • ASNZS 1269.3-2005 Occupational noise anagement Part 3 Hearing protector program
  • ASNZS 1269.4-2005 Occupational noise management Part. 4 Auditory assessment
  • ASSE 1025-1976带软管花洒防虹吸型住宅使用管道龙头的性能要求
  • BSI PAS 220-2008 Prerequisite programmes on food safety for food manufacturing
  • BSI PD6493 焊接缺陷验收标准若干方法指南(1980年)
  • CQI-16 ISO TS16949：2009 指南手册
  • CSA W47.1-1992 中文版 钢结构熔化焊的公司资格 焊接
  • CSA Z245.1-02 中文版 管线钢管标准
  • CSA Z245.1-07 Steel pipe
  • CSA Z245.11-05 Steel fittings
  • CSA Z245.20-02 External Fusion Bond Epoxy Coating for Steel Pipe
  • CSA Z245.20-02 中文版钢管的外部熔融粘合(熔结)环氧涂层
  • CSA Z245.21-02 External Polyethylene Coating for Pipe
  • DD CEN ISO TS 12781-1-2007 Geometrical product specifications (GPS) — Flatness Part 1 Vocabulary and parameters of flatness
  • DD CEN ISO TS 12781-2-2007 Geometrical Product Specifications (GPS) — Flatness Part 2 Specification operators
  • DD CEN ISO TS 17764-1-2006 Animal feeding stuffs — Determination of the content of fatty acids — Part 1 Preparation of methyl esters
  • DD CEN ISO TS 17764-2-2006 动物饲料脂肪酸测定
  • DD ENV 12520-2000 家具 座椅 机械和结构安全要求
  • DD ENV 12521-2000 家具 桌子 机械和结构安全要求
  • DD ENV 13670-1-2000 混凝土结构施工 第1部分：普通
  • DD ENV 1994-1-1-1994 欧洲规程 4复合钢和混凝土结构设计.和英国国家应用文件一块实用的建筑物的一般规则和规则
  • DD ISO TS 14687-2-2008 Hydrogen fuel — Product specification — Part 2 Proton exchange membrane
  • DD ISO TS 16610-32-2009 Geometrical product specifications (GPS) — Filtration Part 32 Robust profile filters Spline filters
  • FMVSS 103 风窗玻璃除霜和除雾系统 Windshield defrosting and defogging systems
  • FMVSS 104 风窗玻璃刮水和洗涤系统后视镜 Windshield wiping and washing systems
  • FMVSS 111 后视镜 Rearview Mirrors
  • FMVSS 123 摩托车的控制器和显示器 Motorcycle Controls and Displays
  • FMVSS 204 中文版 转向控制装置的向后位移技术标准主要技术内容
  • FMVSS 208 II 乘员碰撞保护
  • FMVSS 212 Standard No. 212; Windshield Mounting
  • FMVSS 219 Standard No. 219; Windshield zone intrusion
  • FMVSS 301 燃料系统的完整性 Fuel system integrity
  • FMVSS 571.101 Controls, telltales, and indicators
  • FMVSS 571.102 Transmission shift lever sequence, starter interlock, and transmission braking effect.
  • FMVSS 571.114 Theft protection
  • FMVSS 571.116 Standard No. 116 Motor vehicle brake fluids
  • FMVSS 571.118 动力操纵车窗系统 Power-operated window, partition, and roof panel systems
  • FMVSS 571.124 加速器控制系统 Accelerator Control Systems
  • FMVSS 571.202 Standard No. 202
  • FMVSS 571.204 steering control rearward displacement
  • FMVSS 571.205 Glazing materials
  • FMVSS 571.206 Door Locks and Door Retention Components车门锁及车门固定锁件
  • FMVSS 571.207 Standard No. 207; Seating Systems
  • FMVSS 571.209 Standard No. 209 Seat belt assemblies
  • FMVSS 571.214 standard No.214, side impact protection
  • FMVSS 571.302 Standard No. 302; Flammability of interior materials
  • FMVSS Part 581 Bumper Test System 保险杠的实验标准
  • GOST 12820-1980 法兰公差
  • GOST 12821-80 0.1～20MPa对接焊法兰设计和尺寸
  • GOST 13078-1981
  • GOST 17380-2001 碳钢和低合金钢对焊管件 通用尺寸
  • GOST 27130-1986 中文版 钒铁技术条件
  • GOST 9941-81 冷(温)加工抗腐蚀无缝钢管
  • ISA S84.01-1995 Application of Safety Instrumented Systems for the Process Industries
  • ISA-18.1-1979 ANNUNCIATOR SEQUENCES AND SPECIFICATIONS
  • ISA-5.3-1983 Graphic Symbols for Distributed ControlShared Display Instrumentation, Logic and Computer Systems
  • ISA-5.5-1985 Graphic Symbols for Process Displays
  • ISA-75.07-1997 Laboratory Measurement of Noise Generated by Control Valves
  • JASO C406-2000 乘用车——制动装置——测功机试验规程
  • JASO C448-1980 乘用车——钳盘式制动器台架试验规程
  • JASO C602-2001 汽车零部件——汽车筒式减振器
  • JASO C611-1993 汽车悬架支柱
  • JASO C617-2002 汽车部件——稳定杆
  • JASO C716-1990 转向轴接头台架性能试验规程
  • JASO C717-1991 齿条和行星齿轮类手动转向器台架试验规程
  • JASO D002-1991 汽车无线电干扰特性测量方法
  • JASO D605-1996 汽车电子插接器
  • JASO D610-1993 汽车电线融断器的选择
  • JASO D902-1995 汽车电子设备的耐用性测试方法
  • JASO E107-2001 汽车V形皮带和带轮――形状和尺寸
  • JASO F403-2002 汽车无扩口管接头
  • JASO M321-1999 汽车零部件—空调软管总成
  • JASO M346-1993 汽车内饰件氙气弧光灯照射试验
  • JASO M610-1992 汽车零部件外涂层腐蚀试验方法
  • NF E25-511-1984 中文版 拧紧用带条痕锥形垫片.符号CS
  • NF EN 12223-2000 无损检验 超声检验 1号校准块规范
  • NF EN ISO 3248-2001 色漆和清漆 热效应的测定
  • NF EN ISO 4589-1-1999 塑料制品.用氧指数测定其燃烧性能.第1部分总则
  • PD 8010-1-2004 Code of practice for pipelines — Part 1 Steel pipelines on land
  • PD 8010-2-2004 Code of practice for pipelines — Part 2 Subsea pipelines
  • PD CEN TR 13445-9-2007 非受火压力容器.第9部分EN 13445系列和ISO 16528的一致性
  • PD CR 13445-7-2002 未点火的压力容器 第7部分：符合性程序应用指南
  • PD IEC TR 60071-4-2004 绝缘配合.第4部分绝缘配合的计算指南和电子网络模拟
  • PD IEC TR 61156-1-2-2009 数字通信用多芯和对称二路四路电缆.第1-2部分对称二路四路电缆的电气传输特性和测试方法
  • PD ISO IEC TR 15446-2009 信息技术.安全技术.保护轮廓和安全目标产品用指南
  • PD ISO TR 10064-6-2009 检验实施规程.第6部分斜齿轮测量方法
  • PD ISO TR 15155-2005 农业灌溉系统测试设备
  • PD ISO TR 16268-2009 表面化学分析.验证离子注入产生的工作参考材料中保留面剂量的建议程序
  • PD ISO TR 24699-2009 橡胶和塑料制品.环境方面.标准中包含物的通用指南
  • SABS 1123 南非法兰标准尺寸
  • SEP 1921-1984 中文版 锻件和锻材的超声检验
  • SEP 1924-1998 球墨铸铁件超声波检验 Ultrasonic testing of iron casting containing spheroidal graphite
  • SEP 1925-1980 钢管的涡流密实性检验
  • UNI 7688-1977 内六角螺钉标准
  • BS 1004-1972 Specification for zinc alloys for die casting and zinc alloy die castings
  • BS 546-1950 SUP1-1960 两极和接地插脚插头、插座和插座适配器规格
  • BS 559-1998 信号的设计、建造和装配规范
  • BS 559-2009 宣传,装饰和一般用途的标志设计和制作规范
  • BS 598-108-1990 道路和其他铺砌区用沥青混合料的取样与检验.测量涂石屑上粘合剂条件和粘合剂摊铺率的方法
  • BS 598-109-1990 道路和其他铺砌区用沥青混合物的取样和检验.第109部分压路机压实性能的评定方法和沥青混合物温度测量
  • BS 598-110-1998 道路和其它铺砌区用沥青混合料取样和检验.第110部分轮辙比例和深度测定试验方法
  • BS 598-111-1995 道路和其他铺砌区用沥青混合物的取样和检验.第111部分沥青混合物对不受约束的单轴负载耐永久变形的测定方法
  • BS 600-2000 标准化和质量中统计方法的应用指南
  • BS 638-4-1996 电焊机电缆
  • Bs 639-1986 Carbon & Carbon Magnanese Steel Electrodes For Manual Metal Arc Welding
  • BS 644-2003 Timber windows - Factory assembled windows of various types - Specification
  • BS 644-2009 Timber windows – Fully finished factory-assembled windows of various types – Specification
  • BS 648-1964 建筑材料重量一览表
  • BS 669-1-1989 燃气灶具用软管.接头配件和管座.第1部分采用第1、2类燃气的家用灶具用带绕金属软管、封盖、接头配件和管座规范
  • BS 709-1983 Methods of destructive testing fusion welded joints and weld metal in steel
  • BS 721-2-1983 Specification for worm gearing. Metric units
  • BS 729-1971 Hot —ip Galvanized Coatings on Iron and Steel Articles
  • BS 743-1970 Specification for materials for damp proof courses
  • BS 746-2005 Fittings for installation of low pressure gas meters — Requirements and test methods
  • BS 746-2005 A1-2009 燃气表活接头与转接器用规范
  • BS 747-1994 Specification for Roofing felts
  • BS 750-2006 地下消防栓和地面操纵箱框架及箱盖的规范
  • BS 799-5-1987 Oil burning equipment. Specification for oil storage tanks
  • BS 811-1950 Cycle threads
  • BS 812-1-1975 Testing aggregates part 1 Methods for detemination of particle size shape
  • BS 812-100-1990 Testing aggregates. General requirements for apparatus and calibration
  • BS 812-101：1984 Testing aggregates. Guide to sampling and testing aggregates
  • BS 812-102-1989 集料试验.第102部分取样方法
  • BS 812-103-1-1985 Testing aggregates Part 103. Method for determination of particle size distribution Section
  • BS 812-103-1985 Testing aggregates. Method for determination of particle size distribution. Sieve tests
  • BS 812-103.2-1989 Testing aggregates. Method for determination of particle size distribution. Sedimentation test
  • BS 812-104-1994 Testing aggregates. Method for qualitative and quantitative petrographic examination of aggregates
  • BS 812-105.1-1989 Testing aggregates. Methods for determination of particle shape. Flakiness index
  • BS 812-105.2-1990 Testing aggregates. Methods for determination of particle shape. Elongation index of coarse aggregate
  • BS 812-106-1985 Testing aggregates. Method for determination of shell content in coarse aggregate
  • BS 812-109-1990 Testing aggregates. Methods for determination of moisture content
  • BS 812-110-1990 Testing aggregates. Methods for determination of aggregate crushing value
  • BS 812-111-1990 Testing aggregates. Methods for determination of ten per cent fines value
  • BS 812-112-1990 Testing aggregates. Method for determination of aggregate impact value (AIV)
  • BS 812-113-1990 Testing aggregates. Method for determination of aggregate abrasion value (AAV)
  • BS 812-114-1989 Testing aggregates. Method for determination of the polished-stone value
  • BS 812-117-1988 Testing aggregates. Method for determination of water-soluble chloride salts
  • BS 812-118：1988 Testing aggregates. Methods for determination of sulphate content
  • BS 812-119-1985 集料试验.第119部分细集料中酸溶物质的测定方法
  • BS 812-120-1989 Testing aggregates. Method for testing and classifying drying shrinkage of aggregates in concrete
  • BS 812-121：1989 Testing aggregates. Method for determination of soundness
  • BS 812-123-1999 Testing aggregates. Method for determination of alkali-silica reactivity. Concrete prism method
  • BS 812-2-1995 Testing aggregates. Methods for determination of density
  • BS 848-1-1997 Fans for general purposes. Performance testing using standardized airways
  • BS 848-10-1999 Fans for general purposes. Performance testing of jet fans
  • BS 848-2000 Fans for general propose
  • BS 848-3-2001 Fans for general purposes. Performance testing in situ
  • BS 848-4-1997 Fans for general purposes. Dimensions
  • BS 848-5-1999 Fans for general purposes. Specification for mechanical safety (guarding)
  • BS 848-7-2003 Fans for general purposes. Specifications for balancing and vibration
  • BS 848-8-1999 Fans for general purposes. Vocabulary and definition of categories
  • BS 848-9-2007 Fans for general purposes. Tolerances, methods of conversion and technical data presentation
  • BS 857-1967 陆地运输用安全玻璃规范
  • BS 860-1967 Tables for comparison of hardness scales
  • BS 864-2-1983 Capillary and compression tube fittings of copper and copper alloy
  • BS 871-1981 Specification for abrasive papers and cloths. This Standard is part of the British Standards Online Service brought to you via IHS
  • BS 873-1-1983 Road traffic signs and internally illuminated bollards part 1. Methods of test
  • BS 873-6-1983 Road traffic signs and internally illuminated bollards part 6. Specification for retroreflective and non-retroreflective signs
  • BS 873-7-1984 Road traffic signs and internally illuminated bollards part 7. Specification for posts and fittings
  • BS 874-1-1986 Methods for determining thermal insulating properties. Introduction, definitions and principles of measurement
  • BS 874-3.1-1987 Methods for determining thermal insulating properties. Tests for thermal transmittance and conductance. Guarded hot-box method
  • BS 874-3.2-1990 Methods for determining thermal insulating properties. Tests for thermal transmittance and conductance. Calibrated hot-box method
  • BS 876-1995 手锤规范
  • BS 882-1992 Specification for aggregates from natural sources for concrete
  • BS 890-1995 Specification for building limes
  • BS 903-0-2003 橡胶的物理试验.总则
  • BS 903-1-1995 橡胶的物理试验.第0部分橡胶用试验方法的选择和使用指南
  • BS 903-2-1997 橡胶的物理试验.橡胶试验统计应用导则
  • BS 903-A1-1996 ISO 2781：1988 Physical testing of rubber — Part A1 Determination of density
  • BS 903-A16-1987 Methods of testing vulcanized rubber Patr A16. Determination of the effect of liquids
  • BS 903-A18-1973 橡胶的物理试验.第A18部分 平衡水蒸汽吸收的测定
  • BS 903-A19-1986 Methods of testing vulcanized rubber Patr A19. Heat resistance and accelerated ageing tests
  • BS 903-A26-1995 Physical testing of rubber Part A26. Method for determination of hardness (hardness between 10 IRH— and 100 IRH—)
  • BS 903-A3-1995 Navigation. Back to the previous page · Back to the Accredited Laboratory list · Back to the home page · Membership Benefits
  • BS 903-A4-1990 Physical testing of rubber. Determination of compression stress-strain properties
  • BS 903-A43-1990 Physical testing of rubber. Method for determination of resistance to ozone cracking
  • BS 903-A5-1993 Method for determination of tension set at normal and high temperatures
  • BS 903-A6-1992 Method determination of compression set at ambient,elevated or low temperatures
  • BS 903-A9-1988 Methods of testing vulcanized rubber Part A9. Determination of abrasion resistance
  • BS 903-C2-1982 橡胶的物理试验.体积电阻系数的测定
  • BS 919-1-2007 Screw gauge limits and tolerances. Specification for gauges for screw threads of unified form
  • BS 919-2-2007 Screw gauge limits and tolerances – Part 2 Specification for gauges for screw threads of Whitworth and B.A. forms
  • BS 919-3-1968 Specification for Screw gauge limits and tolerances
  • BS 919-3-2007 Screw gauge limits and tolerances – Part 3 Specification for gauges for screw threads of ISO metric form
  • BS 919-4-2007 Screw gauge limits and tolerances – Part 4 Limits of size for gauges for screw threads of unified form diameters in and larger
  • BS 951-1999 Electrical earthing - Clamps for earthing and bonding-Specification
  • BS 951-2009 电接地.接地和搭铁夹的规范
  • BS 952-1-1995 装配用玻璃.分类
  • BS 952-2-1980 Glass for glazing Part 2. Terminology for work on glass
  • BS 969-2008 Specification for limits and tolerances on plain limit gauges
  • BS 970-1-1991 Specification for wrought steels for mechanical and allied engineering purposes. General inspection and testing procedures and
  • BS 978-1-1968 Fine pitch gears
  • 钢围堰计算
  • 高层钢结构箱形柱的制作
  • 高层钢结构住宅技术与经济分析
  • 高层建筑劲性混凝土梁预制骨架工字钢滑移法施工技术
  • 高钢设计常见问题
  • 高炉炉体框架结构设计探讨
  • 高耐候结构钢
  • 高强度螺栓连接的设计计算
  • 高压输电塔_导线耦联体系的简化抗震计算方法
  • 高压输电塔_线体系抗灾研究的现状与发展趋势
  • 高压输电塔震害及抗震研究
  • 隔墙荷载在双向板上的等效取值
  • 隔震层位置与隔震支座选型
  • 隔震结构设计与分析方法探讨
  • 隔震支座连接处的设计
  • 工程结构优化设计理论与方法
  • 工程勘察收费标准2002
  • 工程设计程序要点
  • 工作状态下栈桥加固设计
  • 关于PKPM软件在工业框架计算中参数及荷载取值的几点讨论
  • 关于多高层钢结构柱计算长度_理论解释
  • 关于多高层钢结构柱计算长度_数例说明
  • 关于多高层钢结构柱计算长度理论解释
  • 关于钢结构抗震设计中轴心受压支撑长细比问题的讨论
  • 关于组合楼盖次梁与主梁连接的计算
  • 管桁架计算模型的选取
  • 管桁架结构计算模型的选取
  • 广州新体育馆屋盖预应力拉索的张拉顺序
  • 焊接结构疲劳强度
  • 杭州萧山国际机场二期扩建国际航站楼钢结构滑移施工
  • 基于Pushover的框架结构抗震性能评估研究
  • 基于SCE算法的结构系统识别
  • 基于不同性能目标的RC结构抗震设计的效益分析
  • 基于纤维模型的超高层钢筋混凝土结构弹塑性时程分析
  • 基于性能的结构抗震设计、理论和方法
  • 基于优化原理的框架梁柱合理线刚度比研究
  • 基于着色Petri网的钢结构施工过程仿真研究
  • 亟待重视设计优化
  • 几个比值的定义及调整,结构设计整体控制指标
  • 几何非线性与材料非线性
  • 几种常见住宅质量通病的产生与防范
  • 计量支付规则
  • 计算多层房屋结构地震作用和剪力的简化方法
  • 计算软件中应力与效应的对比
  • 既有建筑泛碱问题探讨
  • 加强型预应力混凝土管桩抗弯剪性能试验研究
  • 嘉峪关气象塔日照温差作用有限元分析
  • 尖顶斜屋面挂瓦施工技术
  • 兼顾人防工程较一般人防工程的优势
  • 监理工程师在施工组织设计审查中的责任和分寸
  • 减少筏板基础偏心距设计
  • 剪力墙分布筋体积配箍率计算用表
  • 剪力墙结构设计指导书
  • 剪力墙截面设计与构造
  • 剪力墙设计的把握
  • 剪力墙竖直裂缝分析
  • 剪力墙与填充墙间裂缝的质量控制
  • 剪力墙中连梁设计和配筋计算
  • 剪力墙组合配筋方法
  • 2007年中国网通广西分公司监理大纲
  • 2008年监理工程师《合同管理》第一章考点
  • 2008年监理工程师《合同管理》第七章考点
  • 2008年监理工程师《合同管理》第三章考点
  • 2008年监理工程师《合同管理》第二章考点
  • 2008年监理工程师《合同管理》第五章考点
  • 2008年监理工程师《合同管理》第八章考点
  • 2008年监理工程师《合同管理》第六章考点
  • 2008年监理工程师《合同管理》第四章考点
  • 2008年监理工程师质量控制word版
  • 2008版建设工程监理概论--21世纪全国应用型本科教材
  • 2008石油化工建设工程施工安全建设规范
  • 2009公路工程工程量清单
  • 2009年度赣州市中心城区建设工程造价信息
  • 2009年监理工作总结
  • 2009年监理工作总结2
  • 2009年监理工作总结3
  • 2009年监理工程师试题及答案
  • 2010年监理工程师《建筑工程合同管理》试题库
  • xx火柴厂地块1
  • 办公场地装修监理心得及建议
  • 北京2008奥运主体育场监理大纲
  • 北京2008奥运体育场监理大纲
  • 北京市建设工程竣工验收培训
  • 华靳项目监理实施细则
  • 变更与索赔
  • 变电所总布置设计技术规程
  • 土建工程施工监理要点
  • 大体积砼施工
  • 天津开发区公开招标施工招标文件示范文本
  • 安全巡视监控点 文档
  • 安全教育记录
  • 安全文明施工监理细则的安全监理
  • 安全文明监理细则
  • 安全生产月总结
  • 安全生产监理细则 GJJLQC2001[2007]
  • 安全生产监理细则
  • 安全生产综合检查记录
  • 安全监理
  • 安全监理培训
  • 通信工程安全监理手册
  • 安全监理文件编制模版(适用于监理规划、细则及专项方案)
  • 安全监理细则
  • 安全监理细则（丽晶仕）
  • 安全监理表格
  • 安全监理规划
  • 安全监理规划（样本）
  • 安全监督要点
  • 建设工程委托监理合同（示范文本）
  • 建设工程监理规范
  • 建设工程监理规范3
  • 打桩监理手册
  • 新增试验表格
  • 施工阶段监理现场用表
  • 旁站监理方案
  • 旁站监理表格
  • 某体育馆大纲
  • 某高层住宅小区监理规划
  • 案例分析
  • 沉管灌注桩工程监理细则 GJJLQC2005[2008]
  • 深圳市游泳跳水馆装修工程监理细则
  • 游泳跳水馆幕墙工程监理细则2001.5.26.doc
  • 爆破工程监理细则 GJJLQC2051[2009]
  • 玻璃幕墙工程监理实施细则
  • 玻璃幕墙监理实施细则
  • 监理人员签字要领
  • 制剂车间及仓库 监理竣工验收质量评估报告
  • 竣工验收
  • 苏光DJD系列电子经纬仪使用说明书
  • 装饰工程监理实施细则
  • 见证取样与送检方案
  • 试件登记表
  • 试验表格
  • 质量检验表
  • 陈青睐对钢筋问题的回复
  • 临时边坡稳定性计算
  • 二层平面图
  • 二层梁东东
  • 企业经营管理与核心竞争力
  • 保障铁路正常运行的跨线建筑基础方法——扣轨法
  • 八层砖混结构住宅楼纠倾设计
  • 关于《砌体结构设计规范》中几个问题的思考 吴 体 张 冀 侯汝欣
  • 关于加强冬季施工安全技术措施的通知
  • 关于建筑物安全性鉴定工作的几点思考
  • 关于钢结构近似回转半径计算的研究
  • 冬季施工措施
  • 冷缝处理
  • 剪力墙设计的若干问题
  • 加气块施工
  • 化粪池
  • 北京院制图标准
  • 北方地区墙体受温度作用的危害和防治
  • 单层厂房砖墙裂缝的鉴别与处理实例
  • 各种基础手算实
  • 后浇带设置依据及施工注意事项
  • 后院建筑平面图
  • 国外标准型钢规格表
  • 地下室砖砌挡土墙的设计与施工
  • 基于匀质化技术的砌体结构抗震分析
  • 基坑支护在昆明的应用
  • 复件 钢平台
  • 多层砌体房屋的结构体系应注意的几点要求
  • 多层砌体房屋窗改门对房屋安全的影响
  • 多层砖混房屋中构造柱设置浅析
  • 大体积混凝土施工技术
  • 大型商业地产深基坑塔吊施工实践
  • 大跨度高空扣件式脚手架支模承重架的应用
  • 宁夏xxxx工程公司质量管理手册
  • 安全事故与事故隐患
  • 对于砌体结构墙体产生裂缝控制措施的探讨
  • 对砌体结构房屋抗震措施的思考
    • [2013年01月更新标准免费下载] |　 13161   首页 上一页 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 下一页 尾页

    返回标准资料网首页|www.PV265.com