下载首页
|
国家标准
|
行业标准
|
国外标准
|
书籍手册
|
软件工具
|
最新更新
|
下载排行
|
网站地图
|
高级搜索
|
按月归档
设为首页
联系我们
加入收藏
文档搜索:
下载
(不可包含符号 “ / ”)
搜索帮助?
您的位置:
首页
>
标准资料网 栏目分类
>
按月归档
[
2013年01月更新标准免费下载
] |
13161
首页
上一页
11
12
13
14
15
16
17
下一页
尾页
钢筋混凝土框架结构伸缩缝间距计算
钢筋混凝土楼面梁或屋面大梁腹部裂缝
钢筋混凝土独立基础及拉梁层设计讨论
钢筋混凝土现浇楼板裂缝原因分析及防治措施
钢筋混凝土矩形水池裂缝及处理实例
钢筋混凝土短柱问题的处理
钢筋混凝土结构后浇带设计和施工应注意的几个问题
钢筋混凝土结构(上册)-帕克-1985-lillylilly
钢筋混凝土高层住宅转角窗处结构设计
钢筋知识
钢筋砼筒仓在温度作用下的设计
钢筋计算截面面积和重量240mm
钢筋计算截面面积和重量250mm
钢筋连接技术在工程上的应用
钢筋配筋表
钢管桩的腐蚀与防腐公开
钢结构工程倒塌事故原因分析与鉴定
钢结构工程施工及质量验收问答
钢结构建模动画
钢结构技术总览--建筑篇
钢结构设计教程
钢结构设计规范GB500172003应用中的几个问题
钢结构跃层加层技术及其工程应用
钢结构连接节点设计手册
钢骨梁计算书
钢骨钢筋混凝土结构计算标准及解说
钻孔灌注桩成孔、地下连续墙成槽检测技术规程(征求意见稿)
钻孔灌注桩施工组织设计
钻孔灌注桩桩底注浆专项方案
钻芯法检测混凝土强度技术规程 CECS 03:2007
错层结构的分析与设计探讨
锚杆在水池抗浮设计中的应用
防爆墙详图
防空地下室连通口建筑设计探讨
防范住宅结构设计中的通病
陈青来关于钢筋设计问题答复(整理版)
陈青来教授关于钢筋设计相关问题的答复汇总
隔振原理--潘鹏
隧道工程试验检测试卷(01~07)
隧道试题
隧道试验问答题题库(打印)
雕工结构基础设计专题培训招生计划
雕弓结构招生计划20110715
震动桩
静力弹塑性分析(Pushover_Analysis)的基本原理和计算实例
静压管桩应用中常见的几个岩土问题
非杆非壳大体积混凝土结构应力配筋法浅析
面试汇编
预应力
风振舒适度计算
餐厅施工图
驳岸挡墙详图及说明
骨料含泥量对混凝土强度的影响
高压喷射注浆法
高层及小高层结构施工四天一层工序分解表(方案2)
高层建筑变形缝处双剪力墙支模的创新技术
高层建筑地下室埋深小于紧邻地下车库埋深较多时的设计措施
高层建筑地基基础概念设计的思考
高层建筑基础工程技术
高层建筑岩土工程勘察规程(2004)
高层建筑托柱转换结构力学特点的分析与比较
高层建筑施工质量控制要点
高层建筑框架-剪力墙结构设计
高层建筑框架核心筒结构设计分析探讨
高层建筑桩筏基础的工作机理
高层建筑筏板基础的沉降计算
高层建筑结构优化设计分析
高层建筑结构嵌固端的选取及相关技术问题
高层结构施工图
高层质心
高应变波形拟合分析软件
高强混凝土柱的梁柱节点处理方法
高强螺栓连接计算
高强钢筋高强混凝土柱恢复力模型
高等土力学 李广信
高精度测量放线工法
高规主要修订内容
黑龙江大学体育馆结构设计
(PHC)管桩锤击功能不当与失真问题的探讨
NEMA BL 2 2007 Energy Efficiency for Electronic Ballasts for T8 Fluorescent Lamps
NEMA BU 1.2-2002(R2008) Application Information for Busway Rated 600 Volts or Less
NEMA CP 1-2000 Shunt Capacitors
NEMA DC 10-2009 Residential Controls—Temperature Limit Controls for Electrical Baseboard Heaters
NEMA DC 12-1985(R2008) Residential Controls – Hot-water Immersion Controls
NEMA DC 13-1979(R2008) Residential Controls – Line-Voltage Integrally Mounted Thermostats for Electric Heaters
NEMA DC 20-1992(R2003, R2009) Residential Controls—Class 2 Transformers
NEMA DC 3-2008 Residential Controls–Electrical Wall-Mounted Room Thermostats
NEMA DC 5-1989(R2008) Residential Controls – Surface-Type Controls for Electric Storage Water Heaters
NEMA EW 4-2009 Graphic Symbols for Arc-Welding and Cutting Apparatus
NEMA FB 2.10-2007 Selection and Installation Guidelines For Fittings for Use With Non-Flexible Metallic Conduit or Tubing
NEMA FB 2.20-2003 Selection and Installation Guidelines for Fittings for use with Flexible Electrical Conduit and Cable
NEMA HN 1-2008 Manufacturer Disclosure Statement for Medical Device Security
NEMA ICS 1-2000(R2008) Industrial Control and Systems General Requirements
NEMA ICS 14-2007 Application Guide for Electric Fire Pump Controllers
NEMA ICS 16-2001 工业控制和系统、运动位移控制电机、控制器和反馈驱动器
NEMA ICS 18-2001(R2007) Motor Control Centers
NEMA ICS 19-2002(R2007) Diagrams, Device Designations, and Symbols for Industrial Control and Systems
NEMA ICS 2-2000 Controllers, Contactors and Overload Relays Rated 600 V
NEMA ICS 2.3-1995(R2008) Industrial Control and Systems Instructions for the Handling,Installation,Operation, and Maintenance of Motor Control Centers Rated not More than 600 Volts
NEMA LE 6-2008 Procedure for Determining Target Efficacy Ratings for Commercial, Industrial, and Residential Luminaires
NEMA LE 6-2009 Procedure for Determining Target Efficacy Ratings (TER) for Commercial, Industrial and Residential Luminaires
NEMA LI 1-1998 Industrial Laminating Thermosetting Products
NEMA LL 8-2008 Limits on Mercury Content in Self-ballasted Compact Fluorescent Lamps
NEMA LL 9-2009 Dimming of T8 Fluorescent Lighting Systems
NEMA LSD 25-2008 Best Practices for Metal Halide Lighting Systems,Plus Questions and Answers about Lamp Ruptures in Metal Halide Lighting Systems Prepared by
NEMA LSD 39-2007 Spiral CFLs Four-Pin Spiral CFL Systems Issues
NEMA LSD 43-2008 A NEMA Lighting Systems Division Document ZLuminaire Ballast Disconnects
NEMA LSD 44-2009 SSL Sockets Background final
NEMA LSD 45-2009 Recommendations for Solid State Lighting Sub-Assembly Interfaces for Luminaires
NEMA LSD 46-2009 Photoluminescent Exit Signage—Factual Review
NEMA LSD 48-2009 Lead in Household Lamps
NEMA LSD 5-2009 A NEMA Lighting Systems Division Document 34-Watt Fluorescent Lamps and High Frequency Electronic Ballast Compatibility
NEMA LSD 51-2009 Solid State Lighting—Definitions for Functional and Decorative Applications
NEMA MG 1-1998 中文版
NEMA MG 1-2006 Information Guide for General Purpose Industrial AC Small and Medium Squirrel-Cage Induction Motor Standards
NEMA MG 1-2007 Information Guide for General Purpose Industrial AC Small and Medium Squirrel-Cage Induction Motor Standards
NEMA MG 1-2009 电动机与发电机
NEMA MG 10-2001(R2007) Energy Management Guide For Selection and Use of Fixed Frequency Medium AC Squirrel-Cage Polyphase Induction Motors
NEMA MG 11-2001(R2007) Energy Management Guide for Selection and Use of Single-Phase Motors
NEMA MG 2-2001(R2007) Safety Standard and Guide for Selection, Installation, and Use of Electric Motors and Generators
NEMA MS 1-2008 Determination of Signal-to-Noise Ratio (SNR) in Diagnostic Magnetic Resonance Imaging
NEMA MS 10-2006 Determination of Local Specific Absorption Rate (SAR)in Diagnostic Magnetic Resonance Imaging
NEMA MS 11-2006 Determination of Gradient-Induced Electric Fields In Diagnostic Magnetic Resonance Imaging
NEMA MS 12-2006 Quantification and Mapping of Geometric Distortion for Special Applications
NEMA MS 2-2003 Determination of Two-Dimensional Geometric Distortion in Diagnostic Magnetic Resonance Images
NEMA MS 2-2008 Determination of Two-Dimensional Geometric Distortion in Diagnostic Magnetic Resonance Images
NEMA MS 3-2008 Determination of Image Uniformity in Diagnostic Magnetic Resonance Images
NEMA MS 4-2006 Acoustic Noise Measurement Procedure For Diagnostic Magnetic Resonance Imaging Devices
NEMA MS 5-2003 Determination of Slice Thickness in Diagnostic Magnetic Resonance Imaging
NEMA MS 6-2008 Determination of Signal-to-Noise Ratio and Image Uniformity for Single-Channel Non-Volume Coils in Diagnostic MR Imaging
NEMA MS 8-2008 Characterization of the Specific Absorption Rate for Magnetic Resonance Imaging Systems
NEMA MS 9-2008 Characterization of Phased Array Coils for Diagnostic Magnetic Resonance Images
DIN 1013-1-1976 ENG
DIN 1013-1-1976 棒钢 普通热轧圆钢.尺寸 允许尺寸和形状偏差
DIN 1013-2-1976 棒钢 特种热轧圆钢.尺寸 允许尺寸和形状偏差
DIN 1019-1977 热轧球扁钢
DIN 1025-1-1995 ENG
DIN 1025-2-1995 ENG
DIN 1025-3-1994 ENG
DIN 1025-4-1994 ENG
DIN 1025-5-1994 ENG
DIN 1029-1978 热轧不等边圆角角钢尺寸、重量、允许偏差、静力值
DIN 1045-4-2001
DIN 1055-2-1976
DIN 1055-6-1987
DIN 1072-1985
DIN 1080-1-1976
DIN 1080-2-1980
DIN 1080-3-1980
DIN 1080-4-1980
DIN 1080-6-1980
DIN 1469-1978 带槽销
DIN 1543 厚度3~150mm热轧钢板的尺寸,重量及外形允许偏差
DIN 1595-1978 有轨车辆的按钮.按钮螺栓
DIN 1599-1997
DIN 1630-1984 压力载荷用无缝钢管.交货技术条件
DIN 1680-1-1980 铸件毛坯.一般公差及加工余量.总则 (Rough castings; general tolerances and machining allowances; general)
DIN 1680-2-1980 铸件毛坯.一般公差系统 (Rough castings; general tolerance system)
DIN 1681-1985通用途的铸钢.交货的技术条件
DIN 1685-1-1998 球墨铸铁毛坯一般公差及加工余量 不适于新结构
DIN 1686-1-1998 片状石墨铸铁毛坯 一般公差及加工余量不适于新结构
DIN 1690-10 EN
DIN 1690-2 金属材料铸件通用供货技术条件 第2部分_中译稿
DIN 1690-85
DIN 1691-1985 灰铸铁 Flake graphite cast iron (grey cast iron) Properties
DIN 1785-1993
DIN 1787∶1973 Kupfer - Halbzeug 铜,半成品
DIN 1788-1983 Strips and sheets of wrought aluminium and aluminium alloys, with thicknesses from 0.021 to 0.350 mm, properties (德文版)
DIN 1795-1987 高纯铝、纯铝和加工铝合金拉制无缝管材
DIN 1796-1986 拉制的铝和铝塑性合金尖棱方棒.尺寸.尺寸和形状偏差
DIN 1799-1986 压制的铝和铝塑性合金圆棒;尺寸.尺寸和形状偏差
DIN 1810-1979 钩形扳手
DIN 1838-1970
DIN 1840-1970
DIN 1850-1976 实心铜合金制滑动轴承轴套
DIN 1850-2-1997 滑动轴承.带润滑孔.润滑槽和油腔的轴套
DIN 1850-3-1998 滑动轴承 第3部分 烧结金属制套筒
DIN 1850-6-1998 滑动轴承 第6部分 热塑塑料制轴套
DIN 1910-1-1983 焊接 第1部分 焊接概念焊接方法分类
DIN 1910-100-2008 Welding and allied processes - Vocabulary - Part 100 Metal welding processes with additions to DIN EN 14610-2005
DIN 1910-11-1979 焊接.金属焊接材料术语
DIN 1910-2-1977 焊接 金属焊接 工艺
DIN 1910-3-1977 welding-welding of thermoplastic materals; processes
DIN 1910-5-1986 焊接.金属焊接.电阻焊接.方法
DIN 1912-1 1976 焊接.钎焊图样表示法.焊接接头.焊接坡口及焊缝的概念与名称
DIN 1912-2 1977 焊接.钎焊图样表示法.工作位置.焊缝倾角.焊缝旋转角度
DIN 1912-4-1981 焊接.钎焊图样表示法.焊口和焊缝的术语和名称
DIN 1913-1-1984 非合金钢.低合金钢连接焊接用的棒形电极.分类.标记.交货技术条件
DIN 2076-1984 中文版 圆弹簧钢丝 尺寸、重量、允许偏差
DIN 2091-1981
DIN 2093-2006
DIN 2095-1973
DIN 2096-1-1981
DIN 2096-2-1979
DIN 2097-1973
DIN 2098-1-1968
DIN 2098-2-1970
DIN 2099-1-2003
DIN 2099-2-2004
DIN 2099-3-2004
DIN 2103-1993 办公技术和数据技术.色带.织物打字带
DIN 2173-2008 沉孔钻和沉孔扩孔钻.带导柱和柄的刀具技术规范
DIN 2192-2002 Flat form springs - Quality requirements
DIN 2194-2002
DIN 2211-1-1984 传动元件 窄三角皮带轮 尺寸 材料
DIN 2217-1-1973 传动元件.三角皮带轮.尺寸.材料
DIN 2217-2-1973 传动元件.三角皮带轮.槽的检验
DIN 2280-2001
DIN 2281-1-2001
din 2281-2
din 2281-3
DIN 2284-1-2000
DIN 2284-2-2001
DIN 2284-3-2001
DIN 2285-1-1989
DIN 2285-2-1989
DIN 2299-1-2003
DIN 2299-2-1995
DIN 2353 EG
DIN 2391-1-1994英文版 冷拔或冷轧精密无缝钢管第一部分
DIN 2391-1中文版 冷拔或冷轧精密无缝钢管 尺寸
DIN 2391-2-1994英文版 冷拔或冷轧精密无缝钢管第二部分
DIN 2440-1978 ENG
DIN 2462.1-1981 德国不锈钢管标准
DIN 2462.2-1981 德国不锈钢管标准
DIN 2470-1-1987 ENG
DIN 2512
DIN 2526 Form C (UNI 2229-67) Raised face dimensions
DIN 2573, DIN 2576 Flat flange for welding (slip on)
DIN 2609-1991 ENG
DIN 2627, DIN 2628, DIN 2629, DIN 2638 Welding neck flanges 尺寸(160-400 bar)
DIN 2630~2636法兰标准尺寸
DIN 2635
DIN 2674-1974 LOSE Flansche mit vorschwei bund
DIN 2695-2002
DIN 2848-2002 钢制法兰管和有衬里的钢制及铸铁制法兰管件.PN10、PN25和PN40
DIN 2874-2002 钢制法兰管和带PTFE或PFA衬里的钢制和铸铁法兰管件.技术规范
DIN 2874-2002
DIN 2982-1978
DIN 2982-1998 带螺纹的钢制管配件 管内接头 管双内接头(英文版)
DIN 2999-1-1983 螺纹管的管配件用惠氏管螺纹.圆柱形内螺纹和锥形外螺纹.螺纹的尺寸
DIN 3015-2-1999 支撑卡圈.块型卡圈.第2部分重型系列(S)
DIN 3016-1-2000 Fastening clamps - Part 1 With tongue
DIN 3016-2-2000 Fastening clamps - Part 2 With fastening lugs
DIN 3016-3-2000 Fastening clamps - Part 3 Section clamps and flange dimensions
DIN 3016-4-2000 Fastening clamps - Part 4 Technical delivery conditions
DIN 3017-1-1998 软管夹件.第1部分
DIN 3017-2-2002 软管夹件.第2部分带夹紧凸缘的夹件
DIN 3017-3-2002 软管夹件 第3部分螺栓卡圈
DIN 3017.4-1998 软管夹圈 第4部分 交货技术条件
DIN 3017.5-2002 软管夹件 第5部分 带夹紧凸缘的宽带软管夹件 D型和E型
DIN 3088-1989 钢丝绳.提升操作用起吊绳.安全技术要求和检验
DIN 3126-2004螺丝刀和连接件用传动端.尺寸
DIN 3129-1987 六角螺栓用机动带内四方的套筒扳手部件
DIN 319-78 圆球型盖型螺母
DIN 3202-4-1982
DIN 3202-5-1984
DIN 323-1-1974 ENG
DIN 323-2-1974 ENG
DIN 3230-1-1974 Technical Conditions of Delivery for Valves; Enquiry, Order and Delivery
DIN 3230-2 1974 Technical Conditions of Delivery for Valves; General Requirements
DIN 3230-3 1982 Technical delivery conditions for valves; Compilation of test methods
DIN 3230-4-1977 Technical Conditions of Delivery for Valves; Valves for Potable Water Service, Requirements and Testing
DIN 3230-5-1984 Technical delivery conditions; valves for gas installations and gas pipelines; requirements and testing
DIN 3230-6-1987 Technical delivery conditions for valves; requirements and methods of test for valves for use with flammable liquids
DIN 3249-1985
DIN 332-1-1986(E)
DIN 3357-1-1989 ENG
DIN 3357-4-1981 ENG
DIN 3580-1992
DIN 3581-1990
DIN 3760-1996 ENG
DIN 3780-1954 密封.填料盒直径及相关填料宽度.结构尺寸表
DIN 3852-1-2002
DIN 3852-11-1994
DIN 3852-2-2000
DIN 3853-2001
DIN 3854-1995
DIN 3858-2005
DIN 3859-1-1998 螺纹连接件.第1部分交货技术条件
DIN 3859-2-1999 管螺纹连接.第2部分带符合DIN2353有孔圆刀片的非焊接管螺纹连接件用安装指南
DIN 3861-2002
DIN 3863-2003
DIN 3865-2002 压合接头.符合DINENISO8434-1的压接用带O型密封环的24度螺纹接头
DIN 3869-1994
DIN 3871-1995
DIN 3900-2001
DIN 3903-2001
DIN 3904-1987
DIN 3905-1984
DIN 3906-2001
DIN 3907-1987
DIN 3913-2001
DIN 3914-1987 ENG
DIN 3942-2002
DIN 3943-2002
DIN 3944-2002
DIN 3945-2002
DIN 3946-2002
DIN 3949-1998 非焊接压缩耦合件.根据DIN EN ISO 8434-1压缩端型用喇叭形连接件
DIN 3955-2001
DIN 3962-1-1978 ENG
DIN 3962-2-1978 ENG
DIN 3962-3-1978 ENG
DIN 3963-1978 ENG
DIN 3965-2-1986 ENG
DIN 3967-1978 ENG
DIN 3972-1952 与DIN867相符的渐开线齿轮装置的齿轮切削刀具的基准齿廓
DIN 3998-4-1976
DIN 4000-140-2005 特性表.第140部分 工件的啮合系统数据
DIN 4000-141-2005 特性表.第141部分 圆柱形齿轮用带孔或柄的滚刀
DIN 4000-2-1999 Tabular layouts of article characteristics-Part 2 Screws and nuts
DIN 4000-3-1995 sachmerkmal-Leisten Teil 3 für Scheiben und Ringe
DIN 4000-3-1995
DIN 4000-59-1987 齿条.齿轮.齿轮轴.伞轮轴.伞齿轮.伞齿轮轴.蜗杆.蜗轮的特性表
DIN 4017-1 Beiblatt1y 1979
DIN 4017-2-1979
DIN 4019-1-1979
DIN 4019-2Beiblatt1y-1981
DIN 405-1-1975 中文版 圆螺纹的螺纹牙型、公称尺寸和螺纹系列
DIN 405-2-1981 中文版 圆螺纹的偏差和公差
DIN 406-10-92工程制图.尺寸标注.概念和一般原理
DIN 4074-5-2003 木材强度分级.第5部分硬木锯材
DIN 4127-1986
DIN 4150-3-1999
DIN 471-1981
DIN 472-1981
DIN 488-1-1984
DIN 488-2-1986
DIN 488-4-1986
DIN 488-6-1986
DIN 488-7-1986
DIN 509-1998
DIN 5263-1991
DIN 5264-1991
DIN 5401-2002
DIN 5402-1-1993 滚动轴承 滚动轴承零件 圆柱形滚柱
DIN 5402-3-1993 滚动轴承 滚动轴承零件 滚针
DIN 5407-1956 滚动轴承零件,滚子和保持架组件
DIN 616-2000 滚动轴承.尺寸.一般方案
DIN 620-1-1982 ENG
DIN 787-2005
DIN 792-1976 圆柱形沉头螺钉
DIN 867-1986
DIN 926-1986
DIN 931-1
DIN 968-2002 带卡套的十字槽盘头自攻螺钉 (Cross recessed pan head tapping screws with collar)
DIN 976-1-2002 ENG
DIN 981-1993
DIN 986-2000 盖式锁紧螺母
NFPA 1000-2000 消防部门职业资格鉴定计划的认证和认可
NFPA 1001-2002 消防人员的专业资格
NFPA 1002-2003 消防设备操作者的职业资格鉴定
NFPA 1003-2000 tandard for Fire Apparatus DriverOperator Professional Qualifications
NFPA 1006-2000 Standard for Rescue Technician Professional Qualifications
NFPA 1021-2003 消防人员职业资格
NFPA 1026 Draft-2009 Standard for Incident Management Personnel Professional Qualifications
NFPA 1031-2003 消防检查员的职业资格鉴定
NFPA 1033-2003 消防审查员的职业资格鉴定
NFPA 1035-2000 公共消防培训员专业资格鉴定 Public Fire Educator Professional Qualifications
NFPA 1035-2000 公共消防培训员专业资格鉴定
NFPA 1041-1996 Standard for Fire Service Instructor Professional Qualifications
NFPA 1051-2002 荒地防火人员的专业资格鉴定
NFPA 1061-2002 公共安全远程通讯仪的专业资格鉴定标准
NFPA 1071-2000 Standard for Emergency Vehicle Technician Professional Qualifications
NFPA 1081-2001 工业消防人员职业资格鉴定标准
NFPA 1122-1997 Code for Model Rocketry
NFPA 1122-2002 Unmanned Rockets
NFPA 1123-2000 Code for Fireworks Display
NFPA 1124-1998 Code for the Manufacture, Transportation, and Storage of Fireworks
NFPA 1125-2001 Manufacture of Model Rocket Engines
NFPA 1126-2001 Pyrotechnics before a Proximate Audience
NFPA 1127-1998 Code for High Power Rocketry
NFPA 1127-2002 High Power Rocketry
NFPA 1141-2003 Fire Protection in Planned Building Groups
NFPA 1141-2008 Standard for Fire Protection Infrastructure for Land Development in Suburban and Rural Areas
NFPA 1142-1999 Standard on Water Supplies for Suburban and Rural Fire Fighting
NFPA 1144-2002 Protection of Life and Property from Wildfire
NFPA 1145-2000 人工灭火时使用A类泡沫器材的标准
NFPA 1150-2004 Standard on Foam Chemicals for Fires in Class A Fuels
NFPA 1192-1999 Standard on Recreational Vehicles
NFPA 1194-1999 Standard for Recreational Vehicle Parks and Campgrounds
NFPA 1201-2004 公众防火服务的开展
NFPA 1221-2002 公共消防通信
NFPA 1250-2004 Recommended Practice in Emergency Service Organization Risk Management
NFPA 1401-2001 Fire Service Training Reports and Records
NFPA 1402-1997 Building Fire Service Training Centers
NFPA 1403-1997 Standard on Live Fire Training Evolutions
NFPA 1403-2002 Live Fire Training Evolutions
NFPA 1404-2002 消防部门自给式呼吸器规划
NFPA 1405-1996 陆地消防队员的舰船消防
NFPA 1405-2001 担负船舶消防任务陆上消防员指南
NFPA 1410-2000 Standard on Training for Initial Emergency Scene Operations
NFPA 1451-2002 救火车辆操作培训计划
NFPA 1452-2000 Guide for Training Fire Service Personnel to Conduct Dwelling Fire Safety Surveys
NFPA 1500-2002 消防部门的职业安全和健康计划
NFPA 1521-1997 Standard for Fire Department Safety Officer
NFPA 1521-2002 消防部门安全官员
NFPA 1561-2002 消防部门事故管理
NFPA 1581-2000 消防部门不良影响控制规划
NFPA 1582-1997 Medical Requirements for Fire Fighters
NFPA 1582-2000 Medical Requirements for Fire Fighters and Information for Fire Department Physicians
NFPA 410-1999 飞机维修标准
NFPA 412-1998 Evaluating Aircraft Rescue and Fire-Fighting Foam Equipment
NFPA 414-2001 航空器救援和消防装置
NFPA 415-1997 Standard on Airport Terminal Buildings AND etc
NFPA 415-2008 Standard on Airport Terminal Buildings, Fueling Ramp Drainage, and Loading WalkwaysStandard on Airport Terminal Buildings, Fueling Ramp Drainage, and Loading Walkways
NFPA 418-2001 Standard for Heliports
NFPA 418-2006 直升飞机场的标准
NFPA 422-1999 Guide for Aircraft Accident Response
NFPA 422-2004 飞机防火防爆审查员手册
NFPA 423-2004 飞机发动机的试验设施
NFPA 424-1996 空港通信紧急计划
NFPA 430-1995 Code for the Storage of Liquid and Solid Oxidizers
NFPA 430-2004 Code for the Storage of Liquid and Solid Oxidizers
NFPA 432-1997 Code for the Storage of Organic Peroxide Formulations
NFPA 432-2002 Storage of Organic Peroxide Formulations
NFPA 434-1998 Code for the Storage of Pesticides
NFPA 434-2002 Storage of Pesticides in Portable Containers
NFPA 450-2004 应急医疗设施和系统指南
NFPA 471-2002 Recommended Practice for Responding to Hazardous Materials Incidents
NFPA 472-2002 Standard for Professional Competence of Responders to Hazardous Materials Incidents
NFPA 473-2002 Standard for Competencies for EMS Personnel Responding to Hazardous Materials Incidents
NFPA 480-1998 Standard for the Storage, Handling, and Processing of Magnesium Solids and Powders
NFPA 481-2000 the Production, Processing, Handling, and Storage of Titanium
NFPA 482-1996 锆的生产、加工、搬运和储存
NFPA 485-1999 Standard for the Storage Handling Processing and Use of Lithium Metal
NFPA 490-1998 Code for the Storage of Ammonium Nitrate
NFPA 490-2002 Storage of Ammonium Nitrate
NFPA 495-2001 Explosive Materials Code
NFPA 496-2003 Purged and Pressurized Enclosures for Electrical Equipment
NFPA 497-1997 易燃液体、气体或蒸汽分类和化工生产区中电气装置危险品(经分类)设置分类推荐实施规程
NFPA 497-2008 Recommended Practice for the Classification of Flammable Liquids, Gases, or Vapors and of Hazardous (Classified) Locations for Electrical Installations in Chemical Process Areas
NFPA 498-1996 Standard for Safe Havens and Interchange Lots for Vehicles Transporting Explosives
NFPA 498-2001 Safe Havens and Interchange Lots for Vehicles Transporting Explosives
NFPA 499-2004 Classification of Combustible Dusts and of Hazardous (Classified) Locations for Electrical Installations in Chemical Process Areas
NFPA 501-2005 预制装配式房屋
NFPA 501A-2000 Standard for Fire Safety Criteria
NFPA 501A-2003 Manufactured Home Installations, Sites, and Communities
NFPA 501A-2005 预制装配式房屋设备、位置和地区
NFPA 502-1998 Standard for Road Tunnels,Bridges, and Other Limited Access Highways
NFPA 505-2002 Powered Industrial Trucks, Including Type Designations, Areas of Use, Maintenance, and Operation
NFPA 505-2006 包括型号命名、使用范围、改建、维护和操作的动力工业货车消防标准
NFPA 513-1998 Standard for Motor Freight Terminals
NFPA 520-1999 Standard on Subterranean Spaces
NFPA 550-1995 Guide to the Fire Safety Concepts Tree
NFPA 550-2002 Firesafety Concepts Tree
NFPA 551-2004 Guide for the Evaluation of Fire Risk Assessments
NFPA 551-2007 Guide For The Evaluation Of Fire Risk Assessments
NFPA 555-2000 Guide on Methods for Evaluating Potential for Room Flashover
NFPA 560-2002 Storage, Handling, and Use of Ethylene Oxide for Sterilization and Fumigation
NFPA 600-2000 Standard on Industrial Fire Brigades
NFPA 601-2000 Standard for Security Services in Fire Loss Prevention
NFPA 601-2005 防火灾损失的安全设施标准
NFPA 650-1998 Standard for Pneumatic Conveying Systems for Handling Combustible Particulate Solids
NFPA 651-1998 Standard for the Machining and Finishing of Aluminum and the Production and Handling of Aluminum Powders
NFPA 654-2006 可燃性固体颗粒的生产、加工和搬运中防火和防尘爆标准
NFPA 655-1993 Standard for Prevention of Sulfur Fires and Explosions
NFPA 655-2001 Prevention of Sulfur Fires and Explosions
NFPA 664-2002 Prevention of Fires and Explosions in Wood Processing and Woodworking Facilities
NFPA 701-2004 纺织品及薄膜的防火试验
NFPA 703-2000 建筑材料阻火型木材和涂料的消防标准
NFPA 704-2001 Standard System for the Identification of the Hazards of Materials for Emergency Response
NFPA 705-1997 Recommended Practice for a Field Flame Test for Textiles and Films
NFPA 705-2003 Match Flame Field Test for Flame Resistant Textiles and Films
NFPA 720-2003 Recommended Practice for the Installation of Household Carbon Monoxide (CO) Warning Equipment
NFPA 750-2000 Standard on Water Mist Fire Protection Systems
NFPA 750-2006 Standard on Water Mist Fire Protection Systems
NFPA 780-1997 Standard for the Installation of Lightning Protection Systems
NFPA 780-2000 雷电保护系统的安装
NFPA 780-2004 雷电保护系统的安装
NFPA 780-2008 雷电保护系统的安装标准
NFPA 801-2003 Standard for Fire Protection for Facilities Handling Radioactive Materials
NFPA 801-2008 放射性材料处理设备的消防
NFPA 803-1998 清水核电站防火标准
NFPA 804-2010 Standard for Fire Protection for Advanced Light Water Reactor Electric Generating Plants
NFPA 805-2001 轻水反应堆发电厂防火装置性能化消防标准
NFPA 806-2010 Performance-Based Standard for Fire Protection for Advanced Nuclear Reactor Electric Generating Plants Change Process
NFPA 820-2008 废水处理和收集设备的防火
NFPA 850-2000 发电厂和高压直流转换站的防火推荐规程
NFPA 850-2005 发电厂和高压直流转换站的防火推荐规程
NFPA 851-2000 Fire Protection for Hydroelectric Generating Plants
NFPA 851-2005 水力发电厂的防火推荐规程
NFPA 851-2010 Recommended Practice for Fire Protection for Hydroelectric Generating Plants
NFPA 853-2003 Standard for the Installation of Stationary Fuel Cell Power Plants
NFPA 901-2001 防火安全数据和事故报告的分类标准
NFPA 902-1997 Fire Reporting Field Incident Guide
NFPA 903-1996 Fire Reporting Property Survey Guide
NFPA 904-1996 Incident Follow-Up Report Guide
NFPA 906-1998 Guide for Fire Incident Field Notes
NFPA 909-1997 博物馆图书馆宗教场所历史遗产等文化资源保护标准
NFPA 914-1994 古建筑的修复和适当地重新使用
NFPA 921-2001 火灾及爆炸事故调查指
NFPA 921-2004 火灾的调查报告
BS 1916-1-2009 工程的公差与配合.公差指南
BS 1916-2-2009 工程的公差与配合.BS1916-1中配合选择的指南
BS 1916-3-2009 工程公差和配合.大直径的公差,极限和配合指南
BS 1919.1-1993 Hacksaw blades
BS 1919.2-1995 Hacksaw blades
BS 1924-2-1990 Stabilized materials for civil engineering purposes part 2 Methods of test for cement-stabilized and lime-stabilized materials
BS 1940-1987 Butanone (ethyl methyl ketone) for industrial use
BS 1968-1953 Specification for floats for ballvalves (copper)
BS 1970-2006 橡胶和PVC制成的热水袋规范
BS 1981-1991 统一机用螺钉与机用螺母规范
BS 2000-461-2000 Methods of test for petroleum and its products. Bitumen and bituminous binders. Preparation of test samples
BS 2015-1965 Title, Glossary of paint terms. Abstract, Definitions of over 500 terms used in the paint industry including terms describing
BS 2037-1994 Specification for portable aluminium ladders, steps, trestles and lightweight stagings
BS 2059-1953 直边花键与锯齿形花键规范
BS 2080 1989
BS 2451-1963 Specification for chilled iron shot and grit
BS 2456-1990 冷水用浮子操作阀浮子(塑料制品)规范
BS 2470-1973 六角凹头螺钉和套筒扳手规范.英制系列
BS 2482-1981 Specification for timber scaffold boards
BS 2485-1987 中文版 T形槽、T形螺栓、T形螺母与榫舌规范
BS 2486-1997 Recommendations for treatment of water for steam boilers and water heaters (AM— 9948)
BS 2494-1990 Elastomeric seals for joints in pipework and pipelines ICS
BS 2499-1-1993 Hot-applied joint sealant systems for concrete pavements Part 1 .Specification for joint sealants
BS 2499-2-1992 Hot-applied joint sealant systems for concrete pavements Part 2. Code of practice for the application and use of joint sealants
BS 2499-3-1993 Hot-applied joint sealant systems for concrete pavements Part 3 Code of practice for the application and use of joint sealants
BS 2523-1966 Specification for lead-based priming paints
BS 2559-1994 螺丝起子和螺丝起子附件规范
BS 2569-1-1964 金属喷涂规范.第1部分铝与锌保护钢铁免受大气侵蚀
BS 2569-2-1965 金属喷涂规范.第2部分 保护钢铁免受高温下腐蚀和氧化
BS 2572-1990 Specification for phenolic laminated sheet and epoxy cotton fabric laminated sheet
BS 2573-1-1983 起重机设计规程.第1部分结构分类、应力计算和设计准则规范
BS 2573-2-1980 Rules for the design of cranes. Specification for classification, stress calculations and design of mechanisms
BS 2583-1955 Specification for podger spanners
BS 2600 Part 1-1983 焊缝无损检测-焊接接头射线检验
BS 2600 Part 2-1973焊缝的无损检验
BS 2627-1970 specification for wrought aluminum for electrical purposes wire
BS 2648-1955 Performance requirements for electrically-heated laboratory drying ovens
BS 2693-1-1956 双头螺栓.第1部分 通用双头螺拴
BS 2693-2-1964 双头螺栓规范.第2部分高级双头螺拴
BS 2738-1-1998 Spectacle lenses
BS 2738-3-2004 Spectacle lenses
BS 2742-2009 Use of the Ringelmann and miniature smoke charts
BS 2760-1973 Specification for pitch-impregnated fibre pipes and fitting for below and above ground drainage
BS 2767-1991 Specification for manually operated copper alloy valves for radiators
BS 2779-1986 Specification for Pipe threads for tubes and fittings where pressure-tight joints are not made on the threads
BS 2782-0-2004 塑料的试验方法.引言
BS 2782-1 Method 140A-1992 塑料试验方法.第1部分热特性.方法140A卧式和立式样品小火源燃烧性能测定
BS 2782-10 Method 1003-1977 塑料试验方法.第10部分玻璃纤维增强塑料.试验方法1003拉伸性能测定
BS 2782-3-320A to 320F-1976 Plastics Part 3. Mechanical properties Methods 320A to 320F. Tensile strength, elongation and elastic modulus
BS 2782-3-365A-1976 Mechanical properties Method 365A. Determination of softness number of flexible plastics materials
BS 2782-4-430A to 430-1983 Plastics Part 4. Chemical properties Methods
BS 2782-5-1999
BS 2782-6-620A to 620-1991 ISO 1183-1984 Specification for anodic oxidation coatings on wrought
BS 2789-1985 球墨铸铁标准
BS 2790-1992 焊接结构的壳式锅炉的设计和制造规范
BS 2816-1989 Silver Plating
BS 2819-1990 织物的纬斜测试
BS 2837-1988 包装箱提升装置用钢铰链与链带组件规范
BS 2842-1992 旋涡式湿度计规范
BS 2846-3-1975 Determination of a statistical tolerance interval
BS 2846-4-1976 统计数据说明指南.第4部分与平均值和方差值有关的估算与试验的技术
BS 2846-6-1976 数据的统计分析 对偶观测下的两种平均数比较
BS 2853-1957 架空吊车道钢梁的设计与试验规范
BS 2865-1984 从织物中抽出的纱线的线密度的测定方法
BS 2869-2-1988 OILS FOR NON-MARINE USE - PART 2
BS 2869-2006 Fuel oils for agricultural, domestic and industrial engines and boilers - Specification (AM— Corrigendum 16678)
BS 2870-1980 Specification for rolled copper and copper alloys sheet, strip and foil
BS 2871-1-1971 Specification for copper and copper alloys. Tubes. Part 1 Copper tubes for water, gas and sanitation.
BS 2871-3-1972 热交换器用铜及合金管
BS 2874-1986 Specification for copper and copper alloy rods and sections (other than forging stock)
BS 2910-1986 钢管环向熔化焊对接接头的射线照相检验方法
BS 2971-1991 输送流体用碳钢管道二级电弧焊规范
BS 2975-1988 玻璃制造用砂的取样和分析方法
BS 2989-1992 Specification for continuously hot-dip zinc coated and iron-zinc alloy coated steel flat products tolerances on dimensions and shape
BS 3015-1991, ISO 2041-1990 Terms relating to mechanical vibration and shock
BS 3016-1989 Pressure regulators for liquefied petroleuum gases
BS 3019-1-1984 TIG welding.Part 1 Specification for TIG welding of aluminium, magnesium and their alloys
BS 3031-1996 Sulfuric acid used in lead-acid batteries
BS 3041-2-1977 射频连接器.第2部分同轴非匹配连接器规范
BS 3049-1976 Specification Pedestrian guard rails (metal)
BS 3066-1995 工程用冷凿及相关工具规范
BS 3072-1989 镍与镍合金规范薄板材和中厚板材
BS 3073-1977 镍和镍合金带材规范
BS 3075-1976 镍与镍合金线材规范
BS 3083-1988 Specification for hot dip zinc coated and hot-dip aluminium-zinc coated corrugated steel sheets for general purposes
BS 3084-2006 Slide Fasteners (Zips) - Specification
BS 3087-1-1991 Pliers and nippers — Part 1 General introduction
BS 3100-1991 Specification for steel castings for general engineering purposes. If you have an interest in it,and please send mailto directly
BS 3111-1-1987 冷加工和冷挤压的钢棒、棍和线
BS 3111-2-1979 冷加工和冷挤压的钢棒、棍和线
BS 3146-1-1974 Specification for Investment castings in metal — Part 1 Carbon and low alloy steels
BS 3146-2-1975 Specification for Investment castings in metal — Part 2 Corrosion and heat resisting steels, nickel and cobalt base alloys
BS 3148-1980 Methods of test for water for making concrete (including notes on the suitability of the water)
BS 3159.1-1999 Wordworking saws for hand use
BS 3159.2-1993 Woodworking saws4hand use
BS 3170-1972
BS 3189-1991 Method for specifying phosphate conversion coatings for metals
BS 3193-1993 Thermally toughened glass panels for use in domestic appliances
BS 3193-2008 Specification for thermally toughened glass panels for use in domestic appliances
BS 3212-1991 Specification for Flexible rubber tubing, rubber hose and rubber hose assemblies for use in LPG vapour phase and LPGair installations
BS 3221-6-1987 药用量具.第6部分 5ml容量的药用立式塑料量匙规范
BS 3262-1-1989 Hot-applied thermoplastic road marking materials part 1 Specification for constituent materials and mixtures
BS 3262-3-1989 Hot-applied thermoplastic road marking materials part 3 Specification for application of material to road surfaces
BS 3288-1-1997 架空电力绝缘子与架空电力导线.第1部分性能与一般要求
BS 3288-2-1990 架空电力绝缘子与架空电力导线.第2部分架空电力金具规范
BS 3288-2-2009 架空电力线路用绝缘子和导体配件.绝缘子配件规范
BS 3288-3-1989 架空电力导线绝缘和导电配件.第三部份:绝缘子组件的球窝连接尺寸
BS 3288-4-1989 架空电力绝缘子与架空电力导线.第4部分绝缘子组件的球窝连接的锁定装置尺寸和试验
BS 3289-2005 地下矿井用纺织帘布层传送带(包括防火性能).规范
BS 3293-1960 石油工业用碳素钢管法兰(公称尺寸24英寸以上)规范
BS 3338-21-1983 Methods for the sampling and analysis of tin and tin alloys - Determination of high cadmium content of soft solders
BS 3379-2005 Combustion modified flexible polyurethane cellular materials for loadbearing applications —
BS 3410-1961 一般工程用金属垫圈规范
BS 3412-1992 Methods of specifying general purpose polyethylene materials for moulding and extrusion
BS 3416-1991 Specification for bitumen-based coatings for cold application, suitable for use in contact with potable water
BS 3424 P8-1983
BS 3424 Part8-1983 Testing coated fabrics Part8.Methods10A,10B and 10C. methods For determination of low temperature performance
BS 3424-0-2000 Testing coated fabrics. Index of parts
BS 3424-10-1987 Testing coated fabrics. Methods 12A and 12B Determination of surface drag
BS 3424-11-1993 Rubber- or plastics-coated fabrics. Determination of blocking resistance
BS 3424-12-1996 part12 Methods of Test for Coated Fabrics
BS 3424-12
BS 3424-13-1999 Testing coated fabrics. Guide to the selection of methods for colour fastness to light testing
BS 3424-14-1985 涂层织物试验.方法16.湿摩擦和干摩擦色牢度及印花耐磨损性的测定方法
BS 3424-16-1995 Testing coated fabrics. Method 18. Determination of air permeability
BS 3424-17-1987 Testing coated fabrics. Method 20. Method for determination of dimensional stability to water immersion
BS 3424-18-1986 Testing coated fabrics. Methods 21A and 21B. Methods for determination of resistance to wicking and lateral leakage
BS 3424-19-1989 Testing coated fabrics. Methods 22A, 22B and 22C. Determination of sulphur staining
BS 3424-2-1992 Testing Coated Fabrics Part 2 Method 4 Pre-Conditioning and Conditioning of Coated Fabrics for Testing Purposes
BS 3424-20-1987 Testing coated fabrics. Method 23. Method for determination of dimensional changes on mechanical relaxation at zero tension
BS 3424-21-1993 Testing coated fabrics. Method 24. Method for determination of elongation and tension set
BS 3424-25-1993 Testing coated fabrics. Method 28. Method for determination of the coating thickness and thickness of any expanded layer
BS 3424-26-1990 涂层织物试验方法.第26部分
BS 3424-28-1995 Testing coated fabrics. Method 31. Determination of specular gloss
BS 3424-31-1990 Testing coated fabrics. Method 34. Method for determination of resistance to scuffing and snagging
BS 3424-34-1992 Testing coated fabrics. Method 37. Method for determination of water vapour permeability index (WVPI)
BS 3424-36-1993 Testing coated fabrics. Method 39. Method for determination of the dimensional stability of coated fabrics to domestic washing
BS 3424-38-1998 Testing coated fabrics. Determination of wounded burst strength
BS 3424-9-1996 涂层织物试验.第9部分抗弯曲损伤性的测定方法
BS 3424.24-1990 涂层织物 耐磨性测试
BS 3424.5-1982 涂层织物 撕破强力测试
BS 3447-1962 Glossary of Terms used in the Glass Industry
BS 3457-1973 Specification for materials for water tap and stopvalve seat washers
BS 3463-1975 压力容器的水位观察和水位计用玻璃规范
BS 3468-1986 奥氏体铸铁
BS 3482-9-1991 Methods of test for desiccants — Part 9 Determination of cobalt chloride content
BS 3505-1986 Specification for unplasticized polyvinyl chloride (PVC-U) pressure pipes for cold potable water
BS 3506-1969 Specification for unplasticized PVC pipe for industrial uses
BS 3539-1986 Sound level meters for the measurement of noise emitted by motor vehicles
BS 3550-1963 渐开线花键规范
BS 3571-1-1985 MIG welding part 1 Specification for MIG welding of aluminium and aluminium alloys
BS 3600-1997 Specification for dimensions and masses per unit length of welded and seamless steel pipes and tubes for pressure purposes
BS 3601-1987 spceifaction for carbon steel pipes and tubes with specified room temperature purposes
BS 3602-1-1987Specification for steel pipes and tubes for pressure purposes carbon and carbon manganese steel with specified elevated temperature properties
BS 3605-2-1992 Austenitic stainless steel pipes and tubes for pressure purposes. Specification for longitudinally welded tubes
BS 3621-2007 Thief resistant lock assembly – Key egress
BS 3632-2005 Residential park homes. Specification
BS 3643-1-1981 ISO 米制螺纹第一部分:原则与基本数据
BS 3643-1-2007 ISO metric screw threads Part 1 Principles and basic data
BS 3643-2-1981 ISO 米制螺纹第二部分:规格与极限尺寸
BS 3643-2-2007 ISO metric screw threads Part 2 Specification for selected limits of size
BS 3673-1-1968 弹簧固定环规范.第1部分碳素钢开口簧环
BS 3673-2-1965 弹簧固定环规范.第2部分碳素钢E 型卡箍
BS 3673-4-1977 弹簧固定环规范.第4部分米制系列碳素钢开口簧环
BS 3673.3-1968 Spring retaining rings part3.Carbon steel C clips
BS 3676-1-2000 Switches for household and similar fixed-electrical installations. General requirements
BS 3680-7-2000 Measurement of liquid flow in open channels Part 7 Specification of equipment for the measurement of water level
BS 3690-1-1989 Bitumens for building and civil engineering part 1 Specification for bitumens for roads and other paved areas
BS 3690-2-1989 Bitumens for building and civil engineering part 2 Specification for bitumens for industrial purposes
BS 3690-3-1990 建筑与土木工程用沥青.第3部分沥青与硬沥青、焦油和特立尼达湖地沥青的混合料规范
BS 3692-1967 Specification for ISO metric precision hexagon bolts, screws and nuts. Metric units.
BS 3692-2001 六角头螺栓
BS 3698-1964 Specification for calcium plumbate priming paints
BS 3712-1-1991 Building and construction sealants — Part 1 Methods of test for homogeneity, relative density and penetration
BS 3712-2-1973 Building and construction sealants — Part 2 Methods of test for seepage, staining, shrinkage, shelf life and paintability
BS 3712-3-1974 建筑施工用密封胶.第3部分使用寿命,结皮特性和粘性消失时间试验方法
BS 3728-1982 Specification for Size designation of children's and infants'wear
BS 3746-1990 园艺用聚氯乙烯软管规范
BS 3755-1964 食品包装材料气味评定的试验方法
BS 3799:1974 Specification for steel pipe fittings, screwed and socket-welding for the petroleum industry
BS 3811-1984 Glossary of maintenance management terms in terotechnology
BS 3811-1993 Glossary of terms used in terotechnology
BS 3823-1990 Grading of ash and hickory wood handles for hand tools - Discuz! Board.
BS 3858-1992 电缆和电线用捆扎和识别套管规范
BS 3882-2007 Specification for topsoil and requirements for use
BS 3892-1-1997 Pulverized-fuel ash part 1 Specification for pulverized-fuel ash for use with Portland cement
BS 3892-2-1996 粉状燃灰.第2部分作为I类添加剂使用的粉状燃灰规范
BS 3892-3-1997 粉状燃灰.第3部分粘结薄泥浆用粉状燃灰规范
BS 3900-E10-1979 Methods of test for part E10 Pull-off test for adhesion(ISO title paints and varnishes - pull-off test adhesion)
BS 3900-E7-1974 Methods of Test for Paints
BS 3900-G6-1989 Methods of test for paints. Assessment of resistance to fungal growth
BS 3903-1977 Methods of test for Sulphuric acid, oleum and liquid sulphur trioxide
BS 3921-1985 Specification for Clay bricks
BS 3923-1-1986 焊接的超声检验.第1部分铁素体钢熔焊的人工检验方法
BS 3923-2-1972 焊接超声检验.第2部分铁素体钢熔焊对接接头自动检验
BS 3958-1-1982 隔热材料.第1部分 预制氧化镁绝热材料
BS 3962-1-1980 Methods of test for Finishes for wooden furniture — Part 1 Assessment of low angle glare by measurement of specular gloss at 85°
BS 3962-5-1980 Finishes for wooden furniture
BS 3981-1976 Specification Iron oxide pigments for paints
BS 3987-1991 Specification for anodic oxidation coatings on wrought aluminium for external architectural applications
BS 3988-1970 Specification for Wrought aluminium for electrical purposes — Solid conductors for insulated cables
BS 3998-1989 Recommendations for tree work
BS 4023-1975 软微孔聚氯乙烯片材规范
BS 4027-1996 抗硫酸盐波特兰水泥标准
BS 4034-1990 Specification for vitrified hotelware
BS 4062-2-1990 液压动力系统阀门.第2部分性能测定方法
BS 4072-1-1987 用铜铬砷复合物进行的木材防腐.第1部分防腐剂规范
BS 4072-2-1987 Wood preservation by means of copperchromiumarsenic compositions. Method for timber treatment
BS 4084-1996 UNJ threads, with controlled root radius, for aerospace. Inch series.
BS 4102-1998 Steel wire for general fencing purposes
BS 4109-1970 电工用铜规范.一般电工及绝缘电缆与软线用铜线
BS 4142-1997 评定工业噪声对住宅和工业混合地区的影响的定方法
BS 4147-1980 Specification for bitumen-based hot-applied coating materials for protecting iron and steel, including suitable primers where required
BS 4151-1967 输入信号为 3至151bin(压力计)的气动阀定位器的评定方法
BS 4163-2007 Health and safety for design and technology in schools and similar establishments. Code of practice
BS 4165-1984 碳素钢和中等抗拉钢埋弧焊用的焊条钢丝及焊剂规范
BS 4168-1-1981 Hexagon socket screws and wrench keys metric series Part 1 Specification for hexagon socket head cap screws
BS 4168-7-1982 内六角螺钉和板手.米制系列.第7部分内六角圆柱头轴肩螺钉规范
BS 4174-1972 Specification for self-tapping screws and metallic drive screws
BS 4177-1992 Specification for cooker control units. This Standard is part of the British Standards Online Service brought to you via IHS
BS 4190-2001 ISO 米制的粗制六角螺拴、螺钉和螺母规范
BS 4211-1994 Ladders for permanent access to chimneys, other high structures, silos and bins
BS 4232-1967 Specification for surface finish of blast-cleaned steel for painting
BS 4235-1-1972 Specification for metric keys and keyways. Parallel and taper keys
BS 4235-2-1977 Specification for metric keys and keyways. Woodruff keys and keyways.
BS 4254-1983 Specification for two-part polysulphide-based sealants
BS 4255-1-1986 建筑物风雨防护用预制橡胶衬垫第1部分非微孔橡胶衬垫规范
BS 4278-1984 升降用吊环螺拴Specification for eyebolts for lifting purposes
BS 4320-1968 Specification for metal washers for general engineering purposes Metric series
BS 4323-1979 ISO 3005-1978 Determination of dimensional change of fabrics induced by free steam
BS 4345-1968 Specification for slotted angles. This Standard is part of the British Standards Online Service brought to you via IHS.
BS 4346-3-1982 Joints and fittings for use with unplasticized PVC pressure pipes part 3 Specification for solvent cement
BS 4360-1990 Weldable structural steels
BS 4370-1-1988 硬质多孔材料的试验方法
BS 4370-2-1993 Methods of test for rigid cellular materials. Methods 7 to 9
BS 4372-1968 Specification for engineers steel measuring rules
BS 4393-1991 Specification for solderable tin or tin-lead coated wires for component terminations
BS 4395-1-1969 HSFG bolts
BS 4395-3-1973 Specification for high strength friction grip bolts and associated nuts and washers for structural engineering Part 3 Higher grade bolts (waisted shank), nuts and general grade washers
BS 4407-1988 Quantitative analysis of fibre mixtures
BS 4407-2002 Hydraulic fluid power - Fluid contamination - Determination of particulate contamination
BS 4422-2005 Fire. Vocabulary
BS 4439-1969 Specification for screwed studs for general purposes. Metric series
BS 4444-1989 Electrical earth monitoring...
BS 4447-1973 Specification for the performance of prestressing anchorages for post-tensioned construction
BS 4449-2005 混凝土用加强钢筋Steel for the reinforcement of concrete-Weldable reinforcing steel-Bar, coil and decoiled product-Specification
BS 4449-2009 Steel for the reinforcement of concrete — Weldable reinforcing steel — Bar,coil and decoiled product —Specification
BS 4449:1997 中文版 混凝土用碳素钢钢筋
BS 4464-1969 B型 单盘簧垫圈
BS 4466-1989 Specification for Scheduling, Dimensioning, Bending & Cutting of Steel Reinforcement for Concrete
BS 4479-1-1990 层覆物品设计.第1部分通用推荐标准
BS 4479-6-1990 Design of articles that are to be coated. Recommendations for hot-dip metal coatings
BS 4482-1985 Specification for cold reduced steel wire for the reinforcement of concrete
BS 4483-1998 混凝土配筋用钢筋网
BS 4483-2005 混凝土配筋用钢筋网
BS 4485.2-1988 Water cooling towers Part 2 Methods for performance testing
BS 4485.3-1988 Water cooling towers Part 3 Code of practice for thermal and functional design
BS 4485.4-1996 Water cooling towers Part 4 Code of practice for stuctural
BS 4486-1980 Specification for hot rolled and hot rolled and processed high tensile alloy steel bars for the prestressing of concrete
BS 4500-2009 公差和配合.锥形配合系统和从C=13到1500,长度从6mm到630mm直径小于等于500mm的锥形的公差系统指南
BS 4500A-1970 ISO极限与配合.数据表选用的ISO配合-基孔制
BS 4500B-1970 ISO limits and fits. Data sheet selected ISO fits - shaft basis
BS 4504-3.1-1989 中文版 管道 阀门 管件用圆法兰 第1节 钢法兰技术条件
BS 4504-3.1-1989 管道 阀门 管件用圆法兰 第1节 钢法兰技术条件
BS 4504-3.1-1989(R1991) 中文版 管道 阀门 管件用圆法兰 第1节 钢法兰技术条件
BS 4504-3.2-1989 中文版 管道 阀门 管件用圆法兰 第2节 铸铁法兰技术条件
BS 4504-3.3-1989 中文版 管道 阀门 管件用圆法兰 第3节 铜合金和组合法兰技术条件
BS 4514-1983 Specification for Unplasticized PVC Soil and Ventilating Pipes, Fittings and Accessories
BS 4514-2001 82.4mm最小平均外径的未增塑聚氯乙烯粪水污物管和通风管以及82.4mm和其他尺寸的配件和附件
BS 4515-1-1996 陆地和近海钢管道焊接规范.碳及碳锰钢管
BS 4515-1-2009 Specification for Welding of Steel Pipelines on Land and Offshore - Part 1 Carbon and Carbon Manganese Steel Pipelines
BS 4515-2-1999 陆地和近海铺设的钢管焊接规范 双相不锈钢管道
BS 4518-1982 环形密封圈(“O“形环)及其安装座的米制尺寸规格
BS 4522-1988 工业用液态化工产品在20℃时绝对浓度的测定方法
BS 4532-1969
BS 4533-101-1990 灯具.一般要求和试验规范
BS 4543-2-1990 Factory made chimneys. Specification for chimneys with stainless steel flue linings for use with solid fuel fired appliances
BS 4543-3-1990 Factory-made chimneys. Chimneys with stainless steel flue lining for use with oil fired appliances
BS 4550-1-1978 Methods of texting cement part 1 Sampling
BS 4550-2-1970 Methods of testing cement. Chemical tests
BS 4550-3-3.1-1978 Methods of texting cement part 3 Physical Tests Section 3.1 Introdution
BS 4550-3-3.2-1978 Methods of texting cement part 3 Physical Tests Section 3.2 Density test
BS 4550-3-3.3-1978 Methods of texting cement part 3 Physical Tests Section 3.3 Fineness test
BS 4550-3-3.4-1978 Hot-applied thermoplastic road marking materials part 3
BS 4550-3-3.5-1978 Methods of testing cement. Physical tests. Determination of standard consistence
BS 4550-3-3.6-1978 Methods of texting cement part 3 Physical Tests Section 3.6 Test for setting times
BS 4550-3-3.7-1978 Methods of texting cement part 3 Physical Tests Section 3.7 Soundness test
BS 4550-3-3.8-1978 Methods of texting cement part 3 Physical Tests Section 3.8 Test for heat of hydration
BS 4551-1-1998 Methods of testing mortars, screeds and plasters. Physical testing
BS 4551-1980 Replaces Notes. Replaced By. Replaced by Notes
BS 4551-2005 Mortar - Methods of test for mortar - Chemical analysis and physical testing
BS 4553-1-1998 600 1000V单相分芯同轴电缆规范.带聚氯乙烯绝缘层的电缆
BS 4553-2-1998 600 1000V单相分芯同轴电缆规范.带热固绝缘层的电缆
BS 4553-3-1998 600 1000V单相分芯同轴电缆规范.带热固绝缘层和受火影响时有低发散烟雾和腐蚀性气体的电缆
ISO 10012-2003 Measurement management systems - Requirements for measurement processes and measuring equipment
ISO 10012-2003 中文版 测量管理系统.测量方法和测量设备的要求
ISO 10017-2003 中文版 统计技术在ISO9001:2000中的应用
ISO 10019-2005 质量管理体系咨询师的选择及其服务的使用的指南
ISO 10049-1992铝合金铸件针孔度目测评定法
ISO 10124-1994 压力用途的无缝钢管和焊接(埋弧焊除外)钢管 层状缺陷检测用超声检验
ISO 10133-2002 小型船舶 电力系统 超低电压直流电力设备
ISO 10135-1994 Drawing indications for moulded parts in technical product documentation
ISO 10190-1992 摩托车链条 特性和试验方法
ISO 10204-2006 铁矿石.镁含量测定.火焰原子吸收光谱法
ISO 10209-1-1992 技术产品文件 词汇 第1部分与技术制图相关的术语 总则和制图种类
ISO 10209-2-1993 技术产品文件 词汇 第2部分有关投射方法的术语
[
2013年01月更新标准免费下载
] |
13161
首页
上一页
11
12
13
14
15
16
17
下一页
尾页
返回标准资料网首页|www.PV265.com