RSS订阅当前栏目 下载首页| 国家标准 | 行业标准 | 国外标准 | 书籍手册 | 软件工具 | 最新更新 | 下载排行 | 网站地图 | 高级搜索 | 按月归档
文档搜索： （不可包含符号 “ / ”） 搜索帮助？
您的位置:首页 > 标准资料网 栏目分类 > 按月归档
[2013年01月更新标准免费下载] |　 13161   首页 上一页 4 5 6 7 8 9 10 11 12 13 14 15 16 17 下一页 尾页
  • ISO 3035-1982 中文版参考 单面单层瓦楞纸板-抗平压强度的测定
  • ISO-11469-plastic
  • ISO-13937-1-2000
  • ISO-13937-2.
  • ISO-13937-3.
  • ISO-13937-4.
  • ISO-1874-1-1992 塑料 聚酰胺(PA)模制和挤出材料 第1部分 命名
  • ISO10014《质量管理－财务与经济效益实现指南》
  • ISO11484-1994 中文版压力用钢管 无损检验(NDT)人员的鉴定与认证
  • ISO11971-1997铸钢件表面质量的目测检查
  • ISO14461-2-2005 乳和乳制品 微生物实验室的质量控制 第2部分：平行板和续馏步骤菌落数可靠性的测定
  • ISO16332-2006柴油机 柴油滤清器 燃料 水分离效果评定方法
  • ISO19011质量和(或)环境管理体系审核指南
  • ISO9001质量管理体系的理解与运作(管理体系理解与推行培训丛书)
  • ISO9001：2008英中对照
  • ISO9001：2008英文版
  • ISO9004_2009CN
  • BS 1006-1990 C06 Colour fastness to domestic and commerical laundering
  • BS 1010-2-1973 给排水设施用排放旋塞和截止(旋压式)阀规范.第2部分 排放旋塞和地面上用截止阀
  • BS 1014-1975 Specification for Pigments for Portland cement and Portland cement products
  • BS 1015-10-1999 Methods of test for mortar for masonry. Determination of dry bulk density of hardened mortar
  • BS 1041-2.1-1985 Code for temperature measurement. Expansion thermometers. Guide to selection and use of liquid-in-glass thermometers
  • BS 1042-1.1-1981 Measurement of fluid flow in closed conduits Part1.Pressure differential devices Section 1.1 Specification
  • BS 1042-1.4-1992 封闭管道内液体流量的测量.第1部分压差器件.第4节第1和2节所述器件的使用指南
  • BS 1052：1980 Specification for mild steel wire for general engineering purposes
  • BS 1070-1993 Safety of Machinery - Terminology - —RAFT
  • BS 1083-1965 精密六角螺拴、螺钉与螺母(B.S.W和B.S.F 螺纹)用规范
  • BS 1088-1-2003 船用胶合板.要求
  • BS 1104-1957 通用梯形螺纹规范
  • BS 1134-1-1988 Assessment of surface texture — Part 1 Methods and instrumentation
  • BS 1134-2-1990 Assessment of surface texture — Part 2 Guidance and general information
  • BS 1139-1.1-1990 金属脚手架.第1部分管.第1节钢管规范
  • BS 1139-1.2-1990 Metal scaffolding. Tubes. Specification for aluminium tube
  • BS 1139-2.2-2009 Metal scaffolding – Part 2 Couplers – Section 2.2 Aluminium couplers and special couplers in steel
  • BS 1139-3-1994 Metal scaffolding - Specification for prefabricated mobile access and working towers
  • BS 1139-4-1982 金属脚手架.第4部分预制钢叉架和排架规范.
  • BS 1155-1992 Specification for Natural rubber compounds for extrusion
  • BS 1161-1977 Specification for aluminium alloy sections for structural purposes
  • BS 1181-1989 Specification for Clay flue liners and flue terminals
  • BS 1191-1-1973 Specification for gypsum building plasters. Excluding premixed lightweight plasters.
  • BS 1194-1969 Specification for Concrete porous pipes for under-drainage
  • BS 1199 and 1200-1976 Specifications for building sands from natural sources
  • BS 1202-1-2002 Specification for nails. Steel nails
  • BS 1202-2：1974 Specification for nails. Copper nails
  • BS 1203-1979 Specification for synthetic resin adhesives (phenolic and aminoplastic) for plywood
  • BS 1203-2001 热固酚醛和氨基塑料木材胶粘剂.分类和试验方法
  • BS 1204-1-1979 Synthetic resin adhesives (phenolic and aminoplastic) for wood part 1. Specification for gap-filling adhesives
  • BS 1210-1963 木螺钉规范
  • BS 1212-1-1990 Float operated valves. Specification for piston type float operated valves
  • BS 1212-2-1990 浮子阀.第2部分隔膜型浮子阀(铜合金阀体)(不含浮子)
  • BS 1212-3-1990 Float operated valves. part 3 Specification for diaphragm type float operated valves (plastics bodied) for coldwater services only
  • BS 1245：1975 Specification for metal door frames (steel)
  • BS 1247-1-1990 Manhole steps part 1 Specification for galvanized ferrous or stainless steel manhole steps
  • BS 1306-1975 Specification for copper and copper alloy pressure piping systems
  • BS 1336-1971 Specification for knotting
  • BS 1362-1973 BS插头保险丝产品规范
  • BS 1363-1 1995 中文版 13 A 插头、插座和适配器.可重接和不可重接保险丝灯头规范
  • BS 1363-1-1995 13 A 插头、插座和适配器.可重接和不可重接保险丝灯头规范 (13 A plugs, socket-outlets and adaptors - Specification for rewirable and non-rewirable 13 A fused plugs)
  • BS 1363-2 1995 中文版 13 A 插头、插座和适配器.13 A 有开关和没有开关插座规范
  • BS 1363-2-1995 13 A 插头、插座和适配器.13 A 有开关和没有开关插座规范 (13 A plugs, socket-outlets and adaptors - Specification for 13 A switched and unswitched socket-outlets)
  • BS 1363-4 1995 中文版 13A 插头、插座和适配器.第4部分13A 熔融连接组合开关设备和非开关设备规范
  • BS 1363-5-2008 13 A plugs, socket-outlets, adaptors and connection units. Specification for fused conversion plugs
  • BS 1369-1-1987 Steel lathing for internal plastering and external rendering part 1. Specification for expanded metal and ribbed lathing
  • BS 1369-1947 Specification for low heat Portland cement
  • BS 1370-1979 低热硅酸盐水泥
  • BS 1377-1-1990 土木工程用土壤试验方法.第1部分一般要求和样品制备
  • BS 1377-2-1990 土木工程用土壤试验方法.第2部分分类试验
  • BS 1377-4-1990 土木工程用土壤的试验方法.压实试验
  • BS 1377-5-1990 土木工程用土壤试验方法.第5部分可压缩性、渗透性和耐用性试验
  • BS 1377-6-1990 土木工程用土壤试验方法.第6部分在液压压力盒内并且用孔隙压力测量进行固结和渗透率试验
  • BS 1377-7-1990 土木工程用土壤试验方法.第7部分剪切强度试验(总应力)
  • BS 1377-8-1990 土木工程用土壤试验方法.第8部分剪切强度试验(有效应力)
  • BS 1377-9-1990 土木工程用土壤试验方法.第9部分现场试验
  • BS 1400-1985 Specfication for copper alloy ingots and copper alloy and high conductivity copper castings
  • BS 1407-1970 Specification for high carbon bright steel (silver steel)
  • BS 1425-1-1991 床上用品、室内装饰品和其他家庭用品的填充料净度.羽绒和羽毛除外的填充料规范
  • BS 1427-2009 Guide to on-site test methods for the analysis of waters
  • BS 1429-1980
  • BS 1434-1985 Specification for copper for electrical purposes copper sections in bars, blanks and segments for commutators
  • BS 1442-1969 铠装电缆用镀锌低碳钢丝规范
  • BS 1449-1-10-1991 Section 1.1Q Specification4hot rolled narrow strip based on specified minimum strength
  • BS 1449-1-11-1991 Steel plate, sheet and strip — Part 1 Carbon and carbon-manganese plate, sheet and strip — Section 1.11
  • BS 1449-1-12-1991 Section 1.12 Specification4tolerances on dimensions&shape4hot rolled narrow strip
  • BS 1449-1-13-1991 Section 1.12 Specification4tolerances on dimensions&shape4hot rolled narrow strip
  • BS 1449-1-14-1991 Steel plate, sheet and strip — Part 1 Carbon and carbon-manganese plate, sheet and strip — Section 1.14
  • BS 1449-1-15-1991 Steel plate, sheet and strip — Part 1 Carbon and carbon-manganese plate, sheet and strip — Section 1.15
  • BS 1449-1-1983 steel plate,sheet&strip Part1 Specification for carbonand carbonmenganese plate, sheet and strip
  • BS 1449-1-2-1991 which is withdrawn. The scope of this British Standard is extended to include steels down to a thickness of 1, 2 mm
  • BS 1449-1-3-1991 Section 1.3 Specification4cold rolled steel plate,sheet&wide strip4vitreous enamelling based on formability
  • BS 1449-1-4-1991 Section 1.4 Specification4hot rolled wide material based on snecified minimum Strength
  • BS 1449-1-5-1991 Steel plate, sheet and strip — Part 1 Carbon and carbon-manganese plate, sheet and strip — Section 1.5
  • BS 1449-1-7-1991 Section 1.5 Specification4cold rolled wide material based on specified minimum strength
  • BS 1449-1-8-1991 Steel plate, sheet and strip — Part 1 Carbon and carbon-manganese plate, sheet and strip — Section 1.8
  • BS 1452-1990 Specification for flake graphite cast iron
  • BS 1467-1972 文件夹与文档规范
  • BS 1470-1987 Specification for wrought aluminium and aluminium alloys for general engineering purposes plate, sheet and strip
  • BS 1471-1972 Wrought Aluminium and Aluminium Alloys.—rawn Tube
  • BS 1473-1972 Specification for wrought aluminium and aluminium alloys rivet, bolt and screw
  • BS 1474-1987 Wrought aluminium and aluminium alloys for general engineering purposes bars, extruded round tubes and sections
  • BS 1490-1988 Specification for aluminium and aluminium alloy ingots and castings for general engineering purposes
  • BS 1494-1-1964 Specification for fixing accessories for building purposes. Fixings for sheet, roof and wall coverings
  • BS 1506-1990 保压螺栓连接件用碳素钢、低合金钢和不锈钢棒材和坯料规范
  • BS 1552-1995 一类、二类和三类燃气用手动截止阀规范
  • BS 1560-3.1-1989 管道 阀门和管件用圆法兰(特定类别).钢、铸铁和铜合金法兰 第1节 钢法兰规范
  • BS 1560-3.1-1989(1995) 中文版 用于管道、阀门和管件的圆法兰(磅级) 钢法兰技术条件
  • BS 1560-3.2-1989 中文版 用于管道、阀门和管件的圆法兰(磅级) 铸铁法兰技术条件
  • BS 1560-3.2-1989 管道 阀门和管件用圆法兰(特定类别).钢、铸铁和铜合金法兰 第2节铸铁法兰规范
  • BS 1560-3.3-1989 中文版 用于管道、阀门和管件的圆法兰(磅级) 铜合金和组合法兰技术条件
  • BS 1560-3.3-1989 管道 阀门和管件用圆法兰(特定类别).钢、铸铁和铜合金法兰第3节铜合金和复合法兰规范
  • BS 1566-1-2002 Copper cylinders for domestic purposes. Open vented copper cylinders - Requirements and test methods
  • BS 1574-1994 开口销
  • BS 1580-1&2-1962 Specification for Unified screw threads — Parts 1 & 2 —iameters 14 in and larger
  • BS 1580-1-2007 Unified screw threads Part 1 Screw threads with diameters in and larger – Requirements
  • BS 1580-3-1965统一螺纹规范.第3部分直径小于1-4英寸
  • BS 1580-3-2007 Unified screw threads – Part 3 Screw threads with diameters below in – Requirements
  • BS 1610-1998 GRADE A-abbr nd sewers normally buried in the ground and normally operating under gravity
  • BS 1615-1987 Method for specifying anodic oxidation coatings on aluminium and its alloys
  • BS 1640-3-1968 石油工业用钢质对接焊管配件规范.锻制碳钢与铁素体合金钢配件米制件
  • BS 1640-4-1968 石油工业用钢对焊管管件规范.第4部分锻造和铸造奥氏体铬镍钢管件 米制单位
  • BS 1664-8-1974 五种质量的机织棉带规范
  • BS 1706-1990 Method for specifying electroplated coatings of zinc and cadmium on iron and steel
  • BS 1710-1984 Specification for identification of pipelines and services
  • BS 1722-1-1986 Fences part1 Specification for chain link fences
  • BS 1722-1-1990 Fences. Specification for chain link fences
  • BS 1722-1-2006 Fences. Specification for chain link fences
  • BS 1722-10-1999 Fences. Specification for anti-intruder fences in chain link and welded mesh
  • BS 1722-10-2006 Fences. Specification for anti-intruder fences in chain link and welded mesh
  • BS 1722-11-2006 Fences. Specification for prefabricated wood panel fences
  • BS 1722-12-2006 Fences. Specification for steel palisade fences
  • BS 1722-14-2006 Fences. Specification for open mesh steel panel
  • BS 1722-16-2009 Fences – Part 16 Specification for powder coatings used as a plastics finish to components and mesh
  • BS 1722-2-2006 Fences – Part 2 Specification for strained wire and wire mesh netting fences
  • BS 1722-5-2006 Fences. Specification for close-boarded fences and wooden palisade fences
  • BS 1722-7-2006 Fences. Specification for wooden post and rail fences
  • BS 1722-8-2006 Fences. Specification for mild steel (low carbon steel) continuous bar fences and hurdles
  • BS 1722-9-2006 Fences. Specification for mild steel (low carbon steel) fences with round or square verticals and flat horizontals
  • BS 1723-1-1986钎焊.第1部分钎焊规范
  • BS 1723-2-1986 钎焊.第2部分钎焊指南
  • BS 1723-3-1988 Brazing -Part 3 Methods for non-destructive and destructive testing
  • BS 1723-4-1988 Brazing.Part 4 Methods for specifying brazing procedure&operator approval testing
  • BS 1726-1-2002 用圆形线材和棒材制的圆柱形螺旋弹簧.规格、公差和测试指南 第1部分：压缩弹簧
  • BS 1726-2-2002 用圆形线材和棒材制的圆柱形螺旋弹簧.规格、公差和测试指南 第2部分：拉伸弹簧
  • BS 1726-3-2002 用圆形线材和棒材制的圆柱形螺旋弹簧.规格、公差和测试指南 第3部分：扭力弹簧
  • BS 1740-1-1971 Specification for wrought steel pipe fittings
  • BS 1740-1-1971
  • BS 1748-8-1960 铜合金分析方法.第8部分铜合金中磷的测定方法(光度测量法）
  • BS 1759-1969 滚花轮规范
  • BS 1768-1963 统一精密六角螺栓、螺钉和螺母(UNC与UNF螺纹)规范
  • BS 1769-1951 粗制六角螺栓螺钉螺母，重型系列
  • BS 1868-1975(R1990) Steel check valves(flanged and butt-welding ends) for the petroleum,petrochemical and allied industries
  • BS 1868
  • BS 1872-1984 Specification for electroplated coatings of tin
  • BS 1873-1975 石油、石油化学及有关工业用钢球形阀、球形截止阀与单向阀(有法兰及对接焊端)规范
  • BS 1877-10-1982 家用床上用品.第10部分童床、摇篮童车及类似家用物品规范
  • BS 1877-8-1974 Specification for Domestic bedding — Part 8 Pillows and bolsters for
  • BS 1881-108-1983 混凝土试验.第108部分新拌混凝土立方体试块的制作方法
  • BS 1881∶Part101∶1983 Testing concrete. Method of sampling fresh concrete on site
  • BS 1881∶Part102∶1983 Testing concrete. Method for determination of slump
  • BS 1881∶Part103∶1993 Testing concrete. Method for determination of compacting factor
  • BS 1881∶Part104∶1983 Testing concrete. Method for determination of Vebe time
  • BS 1881∶Part105∶1984 Testing concrete. Method for determination of flow
  • BS 1881∶Part106∶1983 Testing concrete. Methods for determination of air content of fresh concrete
  • BS 1881∶Part107∶1983 Testing concrete. Method for determination of density of compacted fresh concrete
  • BS 1881∶Part109∶1983 Testing concrete. Method for making test beams from fresh concrete
  • BS 1881∶Part110∶1983 Testing concrete. Method for making test cylinders from fresh concrete
  • BS 1881∶Part111∶1983 Testing concrete. Method of normal curing of test specimens (20°C method)
  • BS 1881∶Part112∶1983 Testing concrete. Methods of accelerated curing of test cubes
  • BS 1881∶Part113∶1983 Testing concrete. Method for making and curing no-fines test cubes
  • BS 1881∶Part114∶1983 Testing concrete. Methods for determination of density of hardened concrete
  • BS 1881∶Part116∶1983 Testing concrete. Method for determination of compressive strength of concrete cubes
  • BS 1881∶Part118∶1983 Testing concrete. Method for determination of flexural strength
  • BS 534-1990 水和污水用钢管接头和异型管件规范
  • BS 544-1969 Specification for linseed oil putty for use in wooden frames
  • 110kV变电站电气主接线
  • 110Kv变电站直流系统接线图
  • 2001浙S10 平篦雨水口
  • 2002年版新标准电气制图(电气信息结构文件编制)
  • 2002浙J42 阳台及空调搁板建筑构造
  • 2002浙J46 室内装饰木门
  • 2003沪JT-117 HJHA建筑围护结构保温构造(HT-800内保温、GN外保温、LT屋面保温)
  • 2004沪S-T-105
  • 2004沪ST-105 J&J-SP系列给水潜水泵应用图
  • 2004浙G12 钢筋混凝土A型屋架
  • 2004浙J48 室内装饰吊顶
  • 2004版ASME规范B31.3工艺管道的技术变更
  • 2006-2007年中国装备制造业发展报告
  • 2006年第二期压力容器设计人员培训班学习感想及心得体会
  • 2006沪G503 预制钢筋混凝土小截面方桩
  • 2006沪J205 平屋面防水构造
  • 2006沪JT-125 住宅厨房卫生间变压三防排气道
  • 2006浙G29钢吊车梁(一)
  • 2007沪J710 塑料节能窗
  • 2007沪JT-108 上海市建筑产品推荐性通用图集35 YTONG轻质砂加气混凝土板建筑构造图(一).pdf
  • 2008-2009机械工程学科发展报告(机械制造)
  • 2008沪J711 铝合金节能窗
  • 2008沪S101 民用建筑太阳能系统应用图集(热水系统分册)
  • 2008浙J57 建筑防水构造(二) (APF、NB系列防水卷材和KS-929、FJS防水涂料)
  • 2009浙J54 外墙外保温构造详图(一) 无机轻集料聚合物保温砂浆系统
  • 2010浙G22 先张法预应力混凝土管桩
  • 2010浙G35 预应力离心混凝土空心方桩
  • 2010浙J60 陶粒混凝土砌块墙体建筑构造
  • 260th 锅炉用布袋除尘器LFDM-8800外形图
  • 264平米电除尘器图纸
  • 600度高温环境下的卸灰阀图纸 300排灰阀安装图
  • 670th锅炉电除尘器
  • 99D203-1 35∕6(10)千伏变配电所二次接线(交流操作部分)
  • 99D268 干式变压器安装
  • 99D302-1 低压双电源切换电路图
  • 99D303-2 常用风机控制电路图
  • 99D501-1、99(03)D501-1建筑物防雷设施安装
  • 99D703-2 液位测量装置安装
  • 99J121-2 外墙外保温建筑构造(二)
  • 99K103 防排烟设备安装图
  • 99S202 室内消火栓安装
  • 99S203 消防水泵接合器安装
  • 99S304 卫生设备安装
  • 99SD767 液位测量装置安装
  • 99X601 住宅智能化电气设计施工图集
  • DL/T 1002-2006 微量溶解氧仪标定方法-标准气体标定法
  • DL/T 1005-2006 高温单辊碎渣机
  • DL/T 928-2005 微机氧弹热量计使用性能检验规程
  • DL/T 931-2005 电力行业理化检验人员资格考核规则
  • DL/T 933-2005 冷却塔淋水填料、除水器、喷溅装置性能试验方法
  • DL/T 938-2005 火电厂排水水质分析方法
  • DL/T 942-2005 直吹式制粉系统的煤粉取样方法
  • DL/T 943-2005 烟气湿法脱硫用石灰石粉反应速率的测定
  • DL/T 944-2005 混凝土泵技术条件
  • DL/T 945-2005 周期式混凝土搅拌楼
  • DL/T 946-2005 水利电力建设用起重机
  • DL/T 947-2005 土石坝监测仪器系列型谱
  • DL/T 948-2005 混凝土坝监测仪器系列型谱
  • DL/T 949-2005 水工建筑物塑性嵌缝密封材料技术标准
  • DL/T 950-2005 电厂标识系统设计导则
  • DL/T 953-2005 水处理用强碱性阴离子交换树脂耐热性能测定方法
  • DL/T 954-2005 火力发电厂水汽试验方法 痕量氟离子、乙酸根离子、甲酸根离子、氯离子、亚硝酸根离子、硝酸根离子、磷酸根离子和硫酸根离子的测定―离子色谱法
  • DL/T 958-2005 电力燃料名词术语
  • DL/T 960-2005 燃煤电厂烟气排放连续监测系统 订货技术条件
  • DL/T 961-2005 电网调度规范用语
  • DL/T 962-2005 高压介质损耗测试仪通用技术条件
  • DL/T 963-2005 变压比测试仪通用技术条件
  • DL/T 965-2005 热力设备检验机构基本能力要求
  • DL/T 966-2005 I送电线路带电作业技术导则
  • DL/T 968-2005 高压直流输电工程启动及竣工验收规程
  • DL/T 969-2005 变电站运行导则
  • DL/T 970-2005 大型汽轮发电机非正常和特殊运行及维护导则
  • DL/T 971-2005 带电作业用交流1kV~35kV便携式核相仪
  • DL/T 972-2005 带电作业工具、装置和设备的质量保证导则
  • DL/T 973-2005 数字高压表检定规程
  • DL/T 974-2005 带电作业用工具库房
  • DL/T 975-2005 带电作业用防机械刺穿手套
  • DL/T 976-2005 带电作业工具、装置和设备预防性试验规程
  • DL/T 977-2005 发电厂热力设备化学清洗单位管理规定
  • DL/T 978-2005 气体绝缘金属封闭输电线路技术条件
  • DL/T 979-2005 直流高压高阻箱检定规程
  • DL/T 983-2005 核电厂蒸汽湿度测量技术规范
  • DL/T 984-2005 油浸式变压器绝缘老化判断导则
  • DL/T 985-2005 配电变压器能效技术经济评价导则
  • DL/T 986-2005 湿法烟气脱硫工艺性能检测技术规范
  • DL/T 987-2005 氧化锌避雷器阻性电流测试仪通用技术条件
  • DL/T 988-2005 高压交流架空送电线路、变电站工频电场和磁场测量方法
  • DL/T 989-2005 直流输电系统可靠性评价规程
  • DL/T 990-2005 双吊点弧形闸门后拉式液压启闭机(液压缸)系列参数
  • DL/T 992-2006 冲击电压测量实施细则
  • DL/T 993-2006 电力系统失步解列装置通用技术条件
  • DL/T 994-2006 火力发电厂风机水泵用高压变频器
  • DL/T 995-2006 继电保护和电网安全自动装置检验规程
  • DL/T 996-2006 火力发电厂汽轮机电液控制系统技术条件
  • DL/T 997-2006 火电厂石灰石-石膏湿法脱硫废水水质控制指标
  • DL/T 998-2006 石灰石-石膏湿法烟气脱硫装置性能验收试验规范
  • DL/T 999-2006 电站用2.25Cr-1Mo钢球化评级标准
  • IEEE Std 1008-1987 IEEE Standard for Softwre Unit Testing
  • IEEE Std 1010-2006 IEEE Guide for Control of Hydroelectric Power Plants
  • IEEE Std 386-2006 IEEE Standard for Separable Insulated Connector Systems for Power Distribution Systems Above 600 V
  • IEEE Std 390-1987 IEEE Standard for Pulse Transformers
  • IEEE Std 399-1997 IEEE Recommended Practice for Industrial and Commercial Power Systems Analysis
  • IEEE Std 400-2001 IEEE Guide for Field Testing and Evaluation of the Insulation of Shielded Power Cable Systems
  • IEEE Std 400.2–2004 IEEE Guide for Field Testing of Shielded Power Cable Systems Using Very Low Frequency (VLF)
  • IEEE Std 400.3-2006 IEEE Guide for Partial Discharge Testing of Shielded Power Cable Systems in a Field Environment
  • IEEE std 421.1-2007 Standard Definitions for Excitation Systems for Synchronous Machines
  • IEEE Std 421.3-1997 IEEE Standard for High-Potential Test Requirements for Excitation Systems for Synchronous Machines
  • IEEE Std 421.4-2004 IEEE Guide for the Preparation of Excitation System Specifications
  • IEEE Std 421.5-2005 IEEE Recommended Practice for Excitation System Models for Power System Stability Studies
  • IEEE Std 434-2006 guide for functional evaluation of insulation systems for AC electric machines rated 2300 V and above
  • IEEE Std 442-1981 IEEE guide for soil thermal resistivity measurements
  • IEEE Std 446-1995 Emergency and Standby Power Systems for Industrial and Commercial Applications
  • IEEE Std 449-1998 IEEE standard for ferroresonant voltage regulators
  • IEEE Std 450-1995 Recommended Practice for Maintenance, Testing, and Replacement of Vented Lead-Acid Batteries for Stationary Applications
  • IEEE Std 484-1996 Recommended Practice for Installation Design and Installation of Vented Lead-Acid Batteries for Stationary Applications
  • IEEE Std 485-1997 Recommended Practice for Sizing Lead-Acid Batteries for Stationary Applications
  • IEEE Std 487-2007 IEEE Recommended Practice for the Protection of Wire-Line Communication Facilities Serving
  • IEEE Std 493-2007 IEEE Recommended Practice for the Design of Reliable Industrial and Commercial Power Systems
  • IEEE Std 495-1986 故障电路指示器的试验指南
  • IEEE Std 502-1985 IEEE Guide for Protection, Interlocking, and Control of Fossil-Fueled Unit- Connected Steam Stations
  • IEEE Std 515-1997 Standard for the Testing, Design, Installation, and Maintenance of Electrical Resistance Heat Tracing for Industrial Applications
  • IEEE Std 516-2009 IEEE Guide for Maintenance Methods on Energized Power Lines
  • IEEE Std 518-1982 减小来自外部源的电噪声输入到控制器的电气设备的安装指南
  • IEEE Std 519-1992 IEEE recommended practices and requirements for harmonic control in electrical power systems
  • IEEE Std 522-1992 Guide for Testing Turn-to-Turn Insulation on Form-Wound Stator Coils for Alternating-Current Rotating Electric Machines
  • IEEE Std 524-1992 Guide to the Installation of Overhead Transmission Line Conductors
  • IEEE Std 524A-1993 Guide to Grounding During the Installation of Overhead Transmission Line Conductors
  • IEEE Std 525-1992 IEEE guide for the design and installation of cable systems in substations
  • IEEE Std 528-1994 IEEE standard for inertial sensor terminology
  • IEEE Std 528-2001 IEEE standard for inertial sensor terminology
  • IEEE Std 535-2006 IEEE Standard for Qualification of Class 1E Lead Storage Batteries for Nuclear Power Generating Stations
  • IEEE Std 572-1985 Class 1E connection assemblies for nuclear power generating
  • IEEE Std 572-2006 IEEE Standard for Qualification of Class 1E Connection Assemblies for Nuclear Power Generating Stations
  • IEEE Std 576-1989 IEEE recommended practice for installation, termination, and testing of insulated power cable as used in the petroleum and chemical industry
  • IEEE Std 602-2007 IEEE Recommended Practice for Electric Systems in Health Care Facilities
  • IEEE Std 627-1980 IEEE Standard for Design Qualification of Safety Systems Equipment Used in Nuclear Power Generating Stations
  • IEEE Std 634-2004 Standard Cable-Penetration Fire Stop Qualification Test
  • IEEE Std 635-1989 IEEE Guide for Selection and Design of Aluminum Sheaths for Power Cables
  • IEEE Std 643-2004 IEEE Guide for Power-Line Carrier Applications
  • IEEE Std 647-2006 单轴激光陀螺试验过程和格式指南的标准规范
  • IEEE Std 650-1990 核电站1E级固定式电池充电器和逆变器的合格鉴定
  • IEEE Std 666-2007 IEEE Std Design Guide for Electric Power Service Systems for Generating Stations
  • IEEE Std 686-2008 IEEE Standard Radar Definitions
  • IEEE std 690-2004 IEEE standard for the design and installation of cable systems for class 1E circuits in nuclear power generating
  • IEEE Std 693-2005 IEEE Power Engineering Society Sponsored by the Substations Committee
  • IEEE Std 730-1989 IEEE Standard for Software Quality Assurance Plans
  • IEEE Std 738-1993 IEEE Standard for Calculating the Current-Temperature Relationship of Bare Overhead Conductors
  • IEEE Std 738-2006 IEEE Standard for Calculating the Current-Temperature of Bare Overhead Conductors
  • IEEE Std 739-1995 IEEE Recommended Practice for Energy Management in Industrial and Commercial Facilities
  • IEEE Std 741-1990 IEEE Standard Criteria for the Protection of Class 1E Power Systems and Equipment in Nuclear Power Generating Stations
  • IEEE Std 754-2008 IEEE Standard for Floating-Point Arithmetic
  • IEEE Std 789-1988 IEEE Standard Performance Requirements for Communications and Control Cables for Application in High Voltage Environments
  • IEEE Std 802.11-2007 Part 11 Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications
  • IEEE Std 802.11a-1999 Supplement to IEEE Standard for Information technology Telecommunications and information exchange between
  • IEEE Std 802.15.5-2009 IEEE Recommended Practice for Information technology— Telecommunications and information
  • IEEE Std 802.16-2004 Air Interface for FixedvBroadband Wireless Access Systems
  • IEEE Std 802.16-2009 IEEE Standard for Local and metropolitan area networks Part 16 Air Interface for Broadband
  • IEEE Std 802.16k-2007 IEEE Standard for Local and Metropolitan Area Networks Media Access Control (MAC) Bridges
  • IEEE Std 802.1AB-2005 IEEE Standard for Local and Metropolitan Area Networks Station and Media Access Control Connectivity Discovery
  • IEEE Std 802.1ad-2005 IEEE Standard for Local and metropolitan area networks Virtual Bridged Local Area Networks Amendment
  • IEEE Std 802.1AE-2006 IEEE Standard for Local and metropolitan area networks Media Access Control (MAC) Security
  • IEEE Std 802.1F-1993 IEEE Standards for Local and Metropolitan Area Networks Common Definitions and Procedures
  • IEEE Std 802.1Q-1998 IEEE Standards for Local and Metropolitan Area Networks Virtual Bridged Local Area Networks
  • IEEE Std 802.1Q-2005 Cor1-2008 IEEE Standard for Local and metropolitan area networks Virtual Bridged Local Area Networks
  • IEEE Std 802.1Q-2005 IEEE Standard for Local and metropolitan area networks Virtual Bridged Local Area Networks
  • IEEE Std 802.1X-2004 Local and metropolitan area networks Port-Based Network Access Control
  • IEEE Std 802.20-2008 IEEE Standard for Local and metropolitan area networks Part 20 Air Interface for Mobile Broadband Wireless Access Systems
  • IEEE Std 802.3-2008 Section 1 IEEE Standard for Information technology— Telecommunications and information exchange between systems—
  • IEEE Std 817-1993 IEEE Standard Test Procedure for Flame-Retardant Coatings Applied to Insulated Cables in Cable Trays
  • IEEE Std 824-2004 IEEE Standard for Series Capacitor Banks in Power Systems
  • IEEE Std 828-1990 IEEE Standard for Software Configuration Management Plans
  • IEEE Std 829-2008 IEEE Standard for Software and System Test Documentation
  • IEEE Std 833-1988 IEEE Recommended Practice for the Protection of Electric Equipment in Nuclear Power Generating Stations from Water Hazards
  • IEEE Std 836-2009 IEEE Recommended Practice for Precision Centrifuge Testing of Linear Accelerometers
  • IEEE Std 837-2002 IEEE Standard for Qualifying Permanent Connections Used in Substation Grounding
  • IEEE Std 845-1988 IEEE guide to evaluation of man-machine performance in nuclear power generating station control rooms and other peripheries
  • IEEE Std 845-1999 IEEE guide for the evaluation of human-system performance in nuclear power generating stations
  • IEEE Std 902-1998 IEEE Guide for Maintenance, Operation, and Safety of Industrial and Commercial Power Systems
  • IEEE Std 928-1986 IEEE Recommended Criteria for Terrestrial Photovoltaic Power Systems
  • IEEE Std 929-2000 IEEE Recommended Practice for Utility Interface of Photovoltaic (PV) Systems
  • IEEE Std 930-2004 IEEE Guide for the Statistical Analysis of Electrical Insulation Breakdown Data
  • IEEE Std 933-1999 IEEE guide for the definition of reliability program plans for nuclear power generating stations
  • IEEE Std 937-2007 IEEE Recommended Practice for Installation and Maintenance of Lead-Acid Batteries for Photovoltaic (PV) Systems
  • IEEE Std 946-2005 IEEE recommended practice for the design of DC auxiliary power systems for generating stations
  • IEEE Std 993-1997 IEEE Standard for Test Equipment Description Language (TEDL)
  • IEEE Std 998-1996 IEEE Guide for Direct Lightning Stroke Shielding of Substations
  • NFPA 101-2000 Life Safety Code
  • NFPA 101-2006 Life Safety Code
  • NFPA 101-2009 Life Safety Code
  • NFPA 101A-2001 Guide on Alternative Approaches to Life Safety
  • NFPA 101A-2007 Guide on Alternative Approaches to Life Safety
  • NFPA 101B-1999 大楼、建筑物紧急出口规范
  • NFPA 102-1995 Standard for Grandstands, Folding and Telescopic Seating, Tents, and Membrane Structures
  • NFPA 105-2007 Standard for the Installation of Smoke Door Assemblies and Other Opening Protectives
  • NFPA 110-2002 Standard for Emergency and Standby Power Systems
  • NFPA 110-2010 Standard for Emergency and Standby Power Systems
  • NFPA 111-2010 Standard on Stored Electrical Energy Emergency and Standby Power Systems
  • NFPA 115-2003 激光器防火措施
  • NFPA 120-1999 Standard for Coal Preparation Plants
  • NFPA 121-2001 Standard on Fire Protection for Self-Propelled and Mobile Surface Mining Equipment
  • NFPA 122-2004 Fire Prevention and Control in Metal Nonmetal Mining and Metal Mineral Processing Facilities
  • NFPA 123-1999 Standard for Fire Prevention and Control in Underground Bituminous Coal Mines
  • NFPA 130-2007 固定式导轨传输系统
  • NFPA 140-2004 移动图片和电视制作工作室发声场所和已验收的防护设备
  • NFPA 150-2000 Standard on Fire Safety in Racetrack Stables
  • NFPA 160-2001 观众前的火焰特殊效果的使用
  • NFPA 170-1999 Standard on Fire Safety Symbols
  • NFPA 170-2002 消防安全和应急符号标准
  • NFPA 170-2006 消防安全和应急符号
  • NFPA 203-1995 屋顶覆盖物和屋顶平台结构
  • NFPA 203-2000 层面覆盖层与屋面盖板结构指南
  • NFPA 204-2002 烟和热量的排放
  • NFPA 211-2000 Standard for chimneys fireplaces vent and solid fuel-burning appliances (烟囱,壁炉,烟道及固体燃料加热)
  • NFPA 214-2000 水冷却塔
  • NFPA 220-1999 Standard on Types of Building Construction
  • NFPA 221-1997 Standard for Fire Walls and Fire Barrier Walls
  • NFPA 221-2009 高要求防火墙、防火墙和防火隔墙的标准
  • NFPA 230-1999 Standard for the Fire Protection of Storage
  • NFPA 231D-1998 Standard for Storage of Rubber Tires
  • NFPA 232-2000 档案履历储藏消防安全
  • NFPA 232A-1995 Guide for Fire Protection for Archives and Records Centers
  • NFPA 241-2004 建筑物改建及拆除的安全防护
  • NFPA 251-1999 Standard Methods of Tests of Fire Endurance of Building Construction and Materials
  • NFPA 252-1999 Standard Methods of Tests of Door Assemblies
  • NFPA 252-2003 Standard Methods of Fire Tests of Door Assemblies
  • NFPA 253-2000 地板覆盖物的辐射板着火试验
  • NFPA 255-2000 建筑材料的表面燃烧层特性的标准测试方法
  • NFPA 256-1998 屋顶覆盖层的防火试验
  • NFPA 257-2000 Standard on Fire Test for Window and Glass Block Assemblies
  • NFPA 257-2007 Standard on Fire Test for Window and Glass Block Assemblies
  • NFPA 258-2001 Recommended Practice for Determining Smoke Generation of Solid Materials
  • NFPA 259-2003 建筑材料潜在热的标准试验方法
  • NFPA 260-2003 已装璜家具零件对香烟烟火的阻燃性
  • NFPA 261-2003 已装璜家具材料组件模型对香烟烟火的阻燃性
  • NFPA 262-2002 电线和电缆的着火和烟雾特征试验
  • NFPA 265-2007 房间全高嵌板和墙面纺织饰物的火势蔓延可燃性评定防火标准试验方法
  • NFPA 266-1998 Standard Method of Test for Fire Characteris
  • NFPA 267-1998 使用大刻度耗氧量热计测试暴露在明火中的床垫
  • NFPA 268-2001 运用辐射热源对内墙阻燃性的试验方法
  • NFPA 269-2000 制订火灾危险模型用毒性效能数据的试验方法
  • NFPA 270-2002 密闭单燃烧室中使用锥形辐射源测量烟雾昏暗度的试验方法
  • NFPA 271-1998 Standard Method of Test for Heat and Visible Smoke Release Rates for Materials and Products Using and Oxygen Consumption Calorimeter
  • NFPA 272-2003 用耗氧热量计测定装璜家具部件或组合件及垫子热释放率的试验方法
  • NFPA 274-2003 管道绝缘材料燃烧特性评价的标准试验方法
  • NFPA 285-1998 使用中比例尺多层试验仪评定包含可燃部件的外部非承重墙组件燃烧特性的标准试验方法
  • NFPA 286-2000 墙壁和天花板内装修评价室内火焰扩张燃烧的标准试验方法
  • NFPA 286-2006 评价墙壁和天花板内装修对室内火焰蔓延所起作用的标准试验方法
  • NFPA 287-2001 使用灭火装置对材料可燃性测量试验的标准方法
  • NFPA 287-2007 易燃物在无尘室里的火灾传播试验方法标准
  • NFPA 288-2001 水平安装在楼板防火系统的楼板门配件的着火试验的标准方法
  • NFPA 288-2007 Standard Methods of Fire Tests of Floor Fire Door Assemblies Installed Horizontally in Fire Resistance–Rated Floor Systems
  • NFPA 290-2003 LP气体容器用无源性保护材料的燃烧试验标准
  • NFPA 291-2002 消防栓灭火液流量试验和标记
  • NFPA 295-1998 Standard for Wildfire Control
  • NFPA 299-1997 野火生命和财产保护
  • NFPA 301-2001 Code for Safety to Life from Fire on Merchant Vessels
  • NFPA 302-1998 Fire Protection Standard for Pleasure and Commercial Motor Craft
  • NFPA 303-2000 Fire Protection Standard for Marinas and Boatyards
  • NFPA 306-2003 船舶上易燃气体的管理
  • NFPA 307-2006 港口、栈桥及码头的结构与防火
  • NFPA 312-2000 在建造、改建、修理和报废过程中的船只消防
  • NFPA 318-1995 中文版 无尘室防护标准
  • NFPA 318-2000 Standard for the Protection of Cleanrooms
  • NFPA 318-2006 半导体制造设备的保护
  • NFPA 326-1999 Standard for the Safeguarding of Tanks and Containers
  • NFPA 329-1999 Recommended Practice for Handling Releases of Flammable and Combustible Liquids and Gases
  • NFPA 385-2000 Standard for Tank Vehicles for Flammable and Combustible Liquids
  • NFPA 395-1993 在野外和岛屿建筑工程中可燃和易燃液体的储存
  • NFPA 400-2008 Draft Hazardous Chemicals
  • NFPA 402-1996 救火操作和飞行器救助
  • NFPA 403-2003 Aircraft Rescue and Fire Fighting Services at Airports
  • NFPA 405-2004 航空救援及消防服务的救生熟练性训练的推荐规程
  • NFPA 407-1996 Standard for Aircraft Fuel Servicing
  • NFPA 407-2001 航空器燃料供应
  • NFPA 408-1999 Standard for Aircraft Hand Portable Fire Extinguishers
  • NFPA 408-2004 飞机用手动灭火器
  • NFPA 51A-2001乙炔钢瓶的充气设备
  • NFPA 51B-2003 切削和焊接工艺中的防火
  • NFPA 52 压缩天然气（CNG）车辆燃料系统标准
  • NFPA 52-1998 Compressed Natural Gas (CNG) Vehicular Fuel Systems
  • NFPA 53-2004 富氧环境下材料、装置和系统推荐实施规程
  • NFPA 54-2006 国家燃料气体规范
  • NFPA 55-2003 便携式储气瓶中的压缩和液化气体
  • NFPA 57-2002 液化天然气车辆燃料
  • NFPA 58 -2001 Liquefied Petroleum Gas Code
  • NFPA 58-2004 液化石油气的储存和搬运
  • NFPA 59-2001 Utility LP-Gas Plant Code
  • NFPA 59A-2001 中文版 液化天然气 LNG 生产、储存和装运标准
  • NFPA 59A-2006 液化天然气的生产和储运
  • NFPA 61-1999 农业及谷物设备的防火和防爆
  • NFPA 61-2002 农业及谷物设备的防火和防爆
  • NFPA 68-2007 Standard on Explosion Protection by Deflagrat
  • NFPA 69-2002 防爆系统
  • NFPA 70-2002 National Electrical Code
  • NFPA 70-2005 国家电气规程
  • NFPA 70-2008 National Electrical Code
  • NFPA 70A-2002 美国单户和双户居室和移动居室的电气规范
  • NFPA 70B-2006 电气设备维护
  • NFPA 70E-2004 员工工作场所的电气安全要求
  • NFPA 70E-2009 Standard for Electrical Safety in the Workplace
  • NFPA 72-2007 National Fire Alarm Code
  • NFPA 72-2010 National Fire Alarm and Signaling Code
  • NFPA 73-2000 住宅电气维护
  • NFPA 75-2009 Standard for the Protection of Information Technology Equipment
  • NFPA 77-1993 静电起电的试验方法
  • NFPA 77-2000 Recommended Practice on Static Electricity
  • NFPA 77-2007 推荐的防静电做法
  • NFPA 79-2002 工业机械的电气标准
  • NFPA 79-2007 Electrical Standard for Industrial Machinery
  • NFPA 80-1999 中文版 防火门和防火窗标准
  • NFPA 80-2007 Standard for Fire Doors and Other Opening Protectives
  • NFPA 80A-2007 Recommended Practice for Protection of Buildings from Exterior Fire Exposures
  • NFPA 82-1999 Incinerators and Waste and Linen Handling Systems and Equipment
  • NFPA 85-2001 Boiler and Combustion Systems Hazards Code
  • NFPA 85-2007 Boiler and Combustion Systems Hazards Code
  • NFPA 86-2007 烘箱和烤炉
  • NFPA 86C-1999 Standard for Industrial Furnaces Using a Spe
  • NFPA 86D-1999 真空大气工业炉
  • NFPA 88A-2002 停车场结构
  • NFPA 88A-2007 Standard for Parking Structures
  • NFPA 88B-1997 Repair Garages
  • NFPA 90A-2002 空气调节和通风系统的安装
  • NFPA 90B-2006 暖气与空调系统的安装标准
  • NFPA 91-2004 物料空运的排气系统
  • NFPA 92A-2000 利用屏蔽和压差的烟控系统标准
  • NFPA 92A-2006 Standard for Smoke-Control Systems Utilizing Barriers and Pressure Differences
  • NFPA 92B-2000 Guide for Smoke Management Systems in Malls,Atria, and Large Areas
  • NFPA 96-2001 商用烹调操作的通风控制和防火
  • NFPA 96-2004 商用烹饪装置的排气控制与防火
  • NFPA 96-2008 商用烹烤的通风和防火标准
  • NFPA 97-2003 烟囱、通风口及放热设备的术语词汇
  • NFPA 99-2002 保健设施标准
  • NFPA 99-2005 保健设施
  • NFPA 99B-2002 低气压设备
  • NFPA 99C-1999 Gas and Vacuum Systems
  • AS 10169-SURFACE APPEARANCE REQUIREMENTS FOR FAS CIAS AND EXTERIOR COMPONENTS
  • AS 2792-1992 Fire hose-Delivery layflat
  • AS 2841-2005 Galvanized steel wire strand
  • AS 2848.1-1998 铝和铝合金--组成和标识第1部分：可锻产品
  • AS 4852.2-2009 Variable message signs Part 2 Portable signs
  • AS 4884-2008 Method of test for determination of histamine levels in fish and fish products seafoods by fluorometric method
  • AS 4904-2009 Consultants agreement—Design and construct
  • AS 4943.1-2009 Digital radio—Terrestrial broadcasting Part 1 Characteristics of terrestrial digital audio broadcasting (T-DAB ) transmissions
  • AS 4991-2004 起重设备 Lifting devices
  • AS 4995-2009 Greywater Treatment Systems for Vessels Operated on Inland Waters
  • AS 5000.1-2005 Electric cables - Polymeric insulated - Part 1 For working voltages up to and including 0.61 (1.2)kV
  • AS 5013.14.2-2009 Food microbiology Method 14.2 General procedures and techniques—Colony count—Membrane filtration method
  • AS 5013.24.1-2009 Food microbiology Method 24.1 Microbiology of food and animal feeding stuffs—Horizontal method for the detection and
  • AS 5013.24.2-2009 Food microbiology Method 24.2 Microbiology of food and animal feeding stuffs—Horizontal method for the detection
  • AS 5013.25-2009 Food microbiology Method 25 Microbiology of food and animal feeding stuffs—Horizontal method for the detection of Shigella spp
  • AS 5013.27-2009 Food microbiology Method 27 Examination of specific products— Cultured dairy products
  • AS 5013.28-2009 Food microbiology Method 28 Examination of specific products— Liquid milks and creams
  • AS 5013.29-2009 Food microbiology Method 29 Examination for specific organisms— Colony count of yeasts and moulds
  • AS 5052-2007 Prohibiting interested third parties from processing insurance claims. Go to documents... History of Bill
  • AS 5054-2007 Ausferritic spheroidal graphite cast irons - Classification
  • AS 5062-2006 Fire protection for mobile and transportable equipment
  • AS 5082.1-2007 Polybutylene (PB) plumbing pipe systems - Metric series Part 1 Metric polybutylene (PB) pipes for hot and cold water applications
  • AS 5082.2-2007 Polybutylene (PB) plumbing pipe systems - Metric series Part 2 Mechanical and fusion jointing systems
  • AS 5200.007-2008 Plumbing and drainage products Part 007 Metal-bodied water hammer arresters
  • AS 5200.037.2-2008 Plumbing and drainage products Part 037.2 Flow controllers for use with heated or cold water systems
  • AS 5601-2004 燃气安装 Gas Installations
  • AS 5602-2009 Refined petroleum products—Vehicle bottom loading and vapour recovery
  • AS 5808-2009 Child-resistant packaging—Requirements and testing procedures for non-reclosable packages for nonpharmaceutical products
  • AS 60034.1-2009 Rotating electrical machines Part 1 Rating and performance (IEC 60034-1, Ed. 11(2004) MOD)
  • AS 60034.11-2009 Rotating electrical machines Part 11 Thermal protection
  • AS 60034.12-2009 Rotating electrical machines Part 12 Starting performance of singlespeed three-phase cage induction motors
  • AS 60034.17-2009 Rotating electrical machines Part 17 Cage induction motors when fed from converters—Application guide
  • AS 60034.26-2009 Rotating electrical machines Part 26 Effects of unbalanced voltages on the performance of three-phase induction motors’
  • AS 60034.7-2009 Rotating electrical machines Part 7 Classification of types of construction, mounting arrangements and terminal box position (IM Code)
  • AS 60034.8-2009 Rotating electrical machines Part 8 Terminal markings and direction of rotation
  • AS 60034.9-2009 Rotating electrical machines Part 9 Noise limits
  • AS 60079.11-2000 Electrical apparatus for explosive gas atmospheres Part 11 Intrinsic safety ‘i
  • AS 60118.0-2007 Hearing aids Part 0 Measurement of electroacoustical characteristics
  • AS 60118.1-2007 Hearing aids Part 1 Hearing aids with induction pick-up coil input
  • AS 60118.12-2007 Hearing aids Part 12 Dimensions of electrical connector systems
  • AS 60118.14-2007 Hearing aids Part 14 Specification of a digital interface device
  • AS 60118.2-2007 Hearing aids Part 2 Hearing aids with automatic gain control circuits
  • AS 60118.4-2007 Hearing aids Part 4 Magnetic field strength in audiofrequency induction loops for hearing aid purposes
  • AS 60118.6-2007 Hearing aids Part 6 Characteristics of electrical input circuits for hearing aids
  • AS 60118.9-2007 Hearing aids Part 9 Methods of measurement of characteristics of hearing aids with bone vibrator output
  • AS 60974.1-2006 Arc welding equipment Part 1 Welding power sources (IEC 60974-12000, MOD)
  • AS 60974.6-2006 Arc welding equipment Part 6 Limited duty portable arc welding and allied process power sources (IEC 60974-62003, MOD)
  • AS 61241.14-2005 A5-2007 Electrical apparatus for use in the presence of combustible dust Part 14 Selection and installation
  • AS 62271.202-2008 High-voltage switchgear and control gear Part 202 High-voltagelow-voltage prefabricated substation
  • AS 6947-2009 Crossing of waterways by electricity infrastructure
  • AS 7240.22-2008 Fire detection and alarm systemsPart 22 Smoke-detection equipment for ducts
  • AS HB 321-2008 Definition of Services in Healthcare Messaging
  • AS ISO 7.1-2008 Pipe threads where pressure-tight joints are made on the threads - Dimensions, tolerances and designation
  • AS SSA 5300-2009 Australian Fish Names Standard
  • AS TR 2961-2007 Telehealth standards scoping study
  • AS TR 2965-2007 Harmonisation of HD and EI data types across AS 4700.X Standards and associated Handbooks
  • AS TR 2966-2007 Standardization of Hierarchic Designators in HL7 messaging
  • AS TR2.11.11-2008 Certified reference materials Coal—Preparation and certification of ASCRM 011-11(Hardgrove grindability index)
  • AS-NZS 1067-2003 Sunglasses and fashion spectacles
  • AS-NZS 1067-2009 Sunglasses and fashion spectacles
  • AS-NZS 1167.1-2005 Welding and brazing - Filler metals - Filler metal for brazing and braze welding
  • AS-NZS 1167.2-1999 Welding and brazing - Filler metals - Filler metal for welding
  • AS-NZS 1170.0 Supp 1-2002 Structural design actions - Genera
  • AS-NZS 1170.0-2002 Amdt 1-2003 Structural design actions - G
  • AS-NZS 1170.1 Supp 1-2002 Structural design actions - Perman
  • AS-NZS 1170.1-2002 Structural design actions - Permanent, im
  • AS-NZS 1170.1-2009 Structural design actions Part 1 Permanent, imposed and other actions
  • AS-NZS 1170.2 Supp 1-2002 Structural design actions - Part 2 Wind actions
  • AS-NZS 1170.2-2002 Structural design actions - Wind actions
  • AS-NZS 1200-2000 Pressure equipment
  • AS-NZS 1221-1997 Amdt 1-2003 Fire hose reels
  • AS-NZS 1221-1997 Fire hose reels
  • AS-NZS 1249-2003 Children's nightwear and limited daywear having reduced fire hazard
  • AS-NZS 1252-1996 High strength steel bolts with associated nuts and washers for structural engineering
  • AS-NZS 1260-2009 PVC-U pipes and fittings for drain, waste and vent application
  • AS-NZS 1270-2002 Acoustics-Hearing protectors
  • AS-NZS 1359.5-2004 Rotating electrical machines - General requirements - Three-phase cage induction motors
  • AS-NZS 1365-1996 扁钢制品的公差
  • AS-NZS 1376-1996 This Joint AustralianNew Zealand Standard was prepared by Joint
  • AS-NZS 1429.2-1998 Electric cables—Polymeric insulated Part 2 For working voltages above 1933 (36) kV up to and including 76132 (145) kV
  • AS-NZS 1546-1-2008 On-site domestic wastewater treatment units Part 1 Septic tanks
  • AS-NZS 1546.2-2008 On-site domestic wastewater treatment units Part 2 Waterless composting toilets
  • AS-NZS 1546.3-2008 On-site domestic wastewater treatment units Part 3 Aerated wastewater treatment systems
  • AS-NZS 1554.1-2000 Structural steel welding - Part1 Welding of steel structuere
  • AS-NZS 1554.1-2004 structural steel welding part 1welding of steel structures
  • AS-NZS 1554.1-2004-Amdt 1-2005 Structural steel welding Part 1 Welding of steel structures
  • AS-NZS 1554.3-2008 Structural steel welding Part 3 Welding of reinforcing steel
  • AS-NZS 1554.4-2004 Structural Steel Welding Part 4 Welding of High Strength Quenched and Tempered Steels
  • AS-NZS 1554.5-2004 Structural Steel Welding Part 5 Welding of Steel Structures Subject to High Levels of Fatigue Loading
  • AS-NZS 1554.6-1994 Structural steel welding-Part6
  • AS-NZS 1567-1997 Copper and copper alloys-Wrought rods, bars and sections
  • AS-NZS 1571-1995 Copper - Seamless tubes for airconditioning and refrigeration
  • AS-NZS 1576.2-2009 Scaffolding - Couplers and accessories
  • AS-NZS 1594 2002 Hot-rolled steel flat products
  • AS-NZS 1594-2002 Hot-rolled steel flat products
  • AS-NZS 1595-1998 Cold-rolled, unalloyed, steel sheet and strip
  • AS-NZS 1596-2008 The storage and handling of LP Gas
  • AS-NZS 1715-2009 Selection, use and maintenance of respiratory protective equipment
  • AS-NZS 1734-1997 铝和铝合金--平薄板、薄板卷和板材
  • AS-NZS 1747(A1-2005) Reeling, trailing and feeder cables used for mining—Repair, testing and fitting of
  • AS-NZS 1747-2003 (A1-2005) Reeling, trailing and feeder cables used for mining-Repair, testing and fitting of accessories
  • AS-NZS 1841.1-2007 Portable fire extinguishers Part 1 General requirements
  • AS-NZS 1841.2-2007 Portable fire extinguishers Part 2 Specific requirements for water type extinguishers
  • AS-NZS 1841.3-2007 Portable fire extinguishers Part 3 Specific requirements for wet chemical type extinguishers
  • AS-NZS 1841.4-2007 Portable fire extinguishers Part 4 Specific requirements for foam type extinguishers
  • AS-NZS 1841.5-2007 Portable fire extinguishers Part 5 Specific requirements for powder type extinguishers
  • AS-NZS 1841.6-2007 Portable fire extinguishers Part 6 Specific requirements for carbon dioxide type extinguishers
  • AS-NZS 1841.7-2007 Portable fire extinguishers Part 7 Specific requirements for vaporizing liquid type extinguishers
  • AS-NZS 1841.8-2007 Portable fire extinguishers Part 8 Specific requirements for non-rechargeable type extinguishers
  • AS-NZS 1850-2009 Portable fire extinguishers— Classification, rating and performance testing
  • AS-NZS 1866-1997 Aluminium and aluminium alloys-Extruded rod, bar, solid and hollow shapes
  • AS-NZS 1891.1-2007 Industrial fall-arrest systems and devices Part 1 Harnesses and ancillary equipment
  • AS-NZS 1892.1-1996 Portable ladders Part 1 Metal
  • AS-NZS 1892.3-1996 Portable ladders Part 3 Reinforced plastic
  • AS-NZS 1892.5-2000 Portable ladders Part 5 Selection, safe use and care
  • AS-NZS 2032-2006 Installation of PVC pipe systems
  • AS-NZS 2040.2-2005 Performance of household electrical appliances—Clothes washing machines Part 2 Energy efficiency labelling requirements
  • AS-NZS 2053.1-2001 Conduits and fittings for electrical installations Part 1 General requirements
  • AS-NZS 2053.7-2002 Conduits and fittings for electrical installations Part 7 Rigid metal conduits and fittings
  • AS-NZS 2208-1996 Amd 1-1999 Safety glazing materials in buildings
  • AS-NZS 2208-1996 Safety glazing materials in buildings
  • AS-NZS 2211.1-2004 Safety of laser products - Equipment classification, requirements and user’s guide
  • AS-NZS 2243.9-2009 Safety in laboratories Part 9 Recirculating fume cabinets
  • AS-NZS 2280-2004 Ductile iron pipes and fittings
  • AS-NZS 2311-2009 Guide to the painting of buildings
  • AS-NZS 2312-2002 大气腐蚀环境下钢铁防护指南
  • AS-NZS 2373-2003 Electric cables - Twisted pair for control and protection circuits
  • AS-NZS 2442.1-1996 Amdt 1-1998 Performance of household electrical appliances
  • AS-NZS 2442.1-1996 Amdt 2-1999 Performance of household electrical appliances-Rotary clothes dryers
  • AS-NZS 2442.1-1996 Amdt 3-2003 Performance of household electrical appliances-Rotary clothes dryers
  • AS-NZS 2442.1-1996 Amdt 4-2006 Performance of household electrical appliances-Rotary clothes dryers
  • AS-NZS 2442.1-1996 Performance of household electrical appliances-Rotary clothes dryers
  • AS-NZS 2442.2-2000 Amdt 2-2007 Performance of household electrical appliances-Rotary clothes dryers
  • AS-NZS 2442.2-2000 Performance of household electrical appliances-Rotary clothes dryers
  • AS-NZS 2451-1998 Bolts, screws and nuts with British Standard Whitworth threads (rationalized series)
  • AS-NZS 2492-2007 Cross-linked polyethylene (PE-X) pipes for pressure applications
  • AS-NZS 2512.1-2009 Methods of testing protective helmets Part 1 Definitions and headforms
  • AS-NZS 2604-1998 Sunscreen products - Evaluation and classification
  • AS-NZS 2615-1995 中文版 液压轮式千斤顶
  • AS-NZS 2640-1994 Portable ramps for vehicles
  • AS-NZS 2693-2003 Vehicle jacks
  • AS-NZS 2728-2007 Prefinishedprepainted sheet metal products for interiorexterior building applications—Performance requirements
  • AS-NZS 2739-2009 Natural gas (NG) fuel systems for vehicle engines
  • AS-NZS 2802-2000 A1-2003 Electric cables—Reeling and trailing—For mining and general use (other than underground coal mining)
  • AS-NZS 2802-2000 Electric cables - Reeling and trailing for mining and general use (other than underground coal mining)
  • AS-NZS 2927-2001 The storage and handling of liquefied chlorine gas
  • AS-NZS 3000-2000 Wiring Rules
  • AS-NZS 3000-2007 Amdt 1-2009 布线规则
  • AS-NZS 3080-2009 Telecommunications installations— Generic cabling for commercial premises (ISOIEC 118012002, MOD)
  • AS-NZS 3100-2002 Amdt 1-2003 Approval and test specification
  • AS-NZS 3100-2002 Amdt 2-2003 Approval and test specification – G eneral requirem ents for electrical equipm ent
  • AS_1038.21.1.1-2008 Coal and coke-Analysis and testing Part 21.1.1 Higher rank coal and coke-Relative
  • DIN 22112-1-2000
  • DIN 22122-2003 连续式机械搬运设备.输送带的可成槽形能力.与拉紧皮带轮接触的运输机皮带传送装置宽度部分的测量
  • DIN 22129-1-1988
  • DIN 22129-2-1988
  • DIN 22129-3-1988
  • DIN 22129-4-1991
  • DIN 22131-2-1988 一般输送技术用钢索输送带 标记
  • din 22131-3-1988 一般输送技术用钢索输送带.检验
  • DIN 22405-1990
  • DIN 24166-1989 ENG
  • DIN 24311-1992液压流体动力.比例控制阀和伺服阀.定义、符号和单位
  • DIN 24338-2001
  • DIN 24550-6-1999 流体技术.液压过滤器.第6部分检验过滤器外壳.尺寸
  • DIN 25002-1-2003 中文版 铁路设施.轨道车名称与符号体系.第1部分 总则
  • DIN 25002-2-2001 中文版 轨道车辆图纸标识系统
  • DIN 25002-3-2001 中文版 铁路应用.铁路车辆的标识系统.第3部分 文件的分类
  • DIN 25002-4-2001 中文版 铁路应用.铁路车辆的标识系统.第4部分 安装位点的标识
  • DIN 25201-1-2004 中文版 铁道车辆及其组件的设计准则 螺栓连接-第1部分：螺栓连接的分类
  • DIN 25201-2-2004 中文版 铁道车辆及其组件的设计准则 螺栓连接-第2部分：设计-机械制造应用
  • DIN 25201-3-2004 中文版 铁道车辆及其组件的设计准则 螺栓连接-第3部分：设计-电气应用
  • DIN 25201-4-2004 中文版 铁道车辆及其组件的设计准则 螺栓连接-第4部分：螺栓连接的安全
  • DIN 25201-5-2004 中文版 铁道车辆及其组件的设计准则 螺栓连接-第5部分：防腐蚀保护
  • DIN 25201-6-2004 中文版 铁道车辆及其组件的设计准则 螺栓连接-第6部分：连接尺寸
  • DIN 25201-7-2004 中文版 铁道车辆及其组件的设计准则 螺栓连接-第7部分：安装
  • DIN 25202-1992 中文版 铁路车辆.螺栓连接件的锁紧.预应力和紧固扭矩
  • DIN 25704-1993
  • DIN 28051-1997 中文版 金属材料构件的有机涂层和衬里 金属构件的结构造型
  • DIN 28124-1-1992 非合金钢和不锈钢制非压力容器和工艺装置用人孔盖Manhole closures for unalloyed and stainless steel unpressurized vessels
  • DIN 28124-2-1992 非合金钢和不锈钢制压力容器的人孔盖Manhole closures for unalloyed steel pressure vessels
  • DIN 28124-3-1992 不锈钢制压力容器用人孔盖Manhole closures for stainless steel pressure vessels
  • DIN 28124-4-1992 人孔盖回转设备Manhole closures - Davits for branch covers
  • DIN 28140-1-2005 排泄阀用连接件.第1部分非合金钢、不锈钢或有衬钢.尺寸配合PN10
  • DIN 28140-2-2005 排泄阀用连接件.第2部分搪玻璃钢件.连接尺寸PN10Connections for bottom discharge valves - Part 2 On glass lined steel; connecting dimensions PN 10
  • DIN 28181-1985_English
  • DIN 28736-1992pins with internal thread, unhardened (ISO 87361986) 未淬硬的有内螺孔的锥销
  • DIN 30389-1980 圆螺纹六角螺母和冠状螺母用于机动车的螺旋扣和拉杆
  • DIN 30670-1991 ENG
  • DIN 30672-2000 持续工作温度50℃以下的地下和水下管道防腐蚀用外部有机覆层.带材和可收缩材料
  • DIN 30677-1-1991 地下敷设的管道配件外部防腐.一般要求用包封(外涂层)
  • DIN 30677-2-1988 地下敷设管道配件外部防腐.高要求用热固性塑料包封(外涂层)
  • DIN 30911-1-1990 烧结金属.烧结检验标准（ＳＰＮ）.尺寸和材料参数的检验 (Sintered metal materials; sint-testing procedures; part 1 testing of dimensions and material properties)
  • DIN 30911-3 1990 烧结金属.烧结检验标准（ＳＰＮ）.烧结密度.开放型孔隙度和浸渍材料含量的检验
  • DIN 30911-5 1990 烧结金属.烧结检验标准（ＳＰＮ）.烧结铁制热处理件硬化深度的测定
  • DIN 30911-6-1990 烧结金属.烧结检验标准（ＳＰＮ）.过滤器性能检验 (Sintered metal materials; sint-testing procedures; part 6 determination of filter properties)
  • DIN 30911-7-1990 烧结金属.烧结检验标准（ＳＰＮ）.软磁性的检验 (Sintered metal materials; sint-testing procedures; part 7 determination of softmagnetic properties)
  • DIN 32525-4-1985 ENG
  • DIN 32730-1993 取暖装置中水和蒸气用具有安全功能的调节阀.安全技术要求和检验
  • DIN 32935-87
  • DIN 34110-1991
  • DIN 34822-2005 带法兰的12孔座凸头螺钉Cheese head screws with flange with 12 point socket
  • DIN 34823-2005 12孔座的半埋头螺钉Raised countersunk head screws with 12 point socket
  • DIN 34824-2007 螺栓和螺钉用12孔座 12 point socket for screw and bolt
  • DIN 38405-4-1985 ENG
  • DIN 40041-1990
  • DIN 40771-1-1981
  • DIN 40771-2-1981
  • DIN 40771-3-1985
  • DIN 41773-1-1979
  • DIN 41773-2-1982
  • DIN 42531.1-1968 变压器 户内和户外套管 等级10N~30N，250安装配
  • DIN 42531.2-1968 变压器 户内和户外套管 等级10N~30N，250安零件
  • DIN 43673-1-1982 电流母线钻孔和螺栓紧固.矩形横截面的电流母线
  • DIN 43857-1-1978
  • DIN 43857-2-1978
  • DIN 43857-3-1974
  • DIN 43857-4-1974
  • DIN 43857-5-1998
  • DIN 43862-1996
  • DIN 44122-1971
  • DIN 44904-1989
  • DIN 46008-1987 接地和保护线连接螺栓的整平
  • DIN 46228-1-1992
  • DIN 46228-4-1990
  • DIN 46244-2-1987
  • DIN 46288-1974 connecting washer
  • DIN 46294-1985 Terminal board, square shaped with six terminals; main dimensions
  • DIN 50021-1988
  • DIN 50021-EN
  • DIN 50049-1986 金属制品检验文件类型
  • DIN 50115-1991
  • DIN 50125-2004 金属材料的检验.抗拉试验用试样
  • DIN 50156-1-2006 金属材料.里氏硬度试验.第1部分试验方法
  • DIN 50156-3-2006 金属材料.里氏硬度试验.第3部分参考试块的校准
  • DIN 50190-1-1978 热处理零件的硬化深度 表面硬化深度的检验
  • DIN 50190-2-1979 热处理件的硬化深度.表面淬火硬化深度的测定
  • DIN 50190-3-1979 热处理件的硬化深度.氮化处理硬化深度的测定
  • DIN 50602 中文版 金相检验方法 用相图对优质钢中的非金属杂质作显微镜检查
  • DIN 50602-1985 金相检验方法 用相图对优质钢中的非金属杂质作显微镜检查
  • DIN 50902-1994 金属材料防腐涂层;词汇,表面处理,应用
  • DIN 50930-6-2001(英文版)金属腐蚀管、槽及装置内水造成金属材料腐蚀 第6部 饮用水成分影响
  • DIN 50961-2000 中文版 电镀层.铁材料上镀锌层和镀镉层.锌和镉镀层的铬酸纯化
  • DIN 50961-2000 英文版 Electroplated coatings; zinc and cadmium coatings on iron and steel; chromate treatment of zinc and cadmium coatings
  • DIN 50962-1998 电镀涂层.铁制工件上铬酸钝化锌合金涂层
  • DIN 51032-1986 ENG
  • DIN 51502-1990润滑剂和有关材料.润滑剂的符号和润滑剂容器的标记.润滑器和润滑点
  • DIN 51604-1-1982
  • DIN 51604-2-1984 ENG
  • DIN 51825-2004 润滑剂.润滑脂K.分类和要求
  • DIN 51900-1-2000
  • DIN 51900-2-2003
  • DIN 51900-3-2005
  • DIN 51900-B1-2004
  • DIN 51917-2002 碳素材料检验.洛氏硬度检验.布式硬度试验方法.固体材料
  • DIN 52013-1985 沥青粘合剂检验.延展性的测定
  • DIN 52024-2002 沥青和沥青粘合剂.稀释沥青的蒸馏
  • DIN 52027-2003 TESTING OF CARBONACEOUS MATERIALS - DISTILLATION OF REFINED COAL TARS
  • DIN 52104-1-1982 TESTING OF NATURAL STONE; FREEZE-THAW CYCLIC TEST; METHODS A TO Q
  • DIN 52104-2-1982 天然石检验.冷冻-露水-变换-试验.方法Z
  • DIN 52108-2002 无机非金属材料测试.使用依照 Boehme的砂轮进行磨损试验.砂轮法
  • 05中关村金融中心超高层钢结构设计中的关键技术
  • 06北京中关村金融中心连廊结构设计
  • 07金鼎大厦结构设计中方案的比较及优化
  • 08探索者破解文件
  • 10版抗震规范修订部分(全)
  • 16层墙柱17层梁板置换工程
  • 18中学加中心小学加固
  • 2010年12月第四周结构技术问题汇总
  • 2010抗震参数表
  • 2010版抗震规范新变化（混凝土部分）
  • 2010版新抗震规范与老版的区别
  • 2011年5月第四周结构技术问题汇总
  • 25连跨酿酒厂房和10连跨酿酒厂房结构图纸电子版
  • 一位当代结构设计师对于概念设计的审视
  • 一套冲渣水处理施工图
  • 一套带地下室的别墅建筑结构施工图
  • 一套带地下结构的转运站图
  • 下沉式广场抗浮锚杆的应用及试验分析
  • 住宅建筑施工图
  • 利用计算软件进行建筑物抗浮设计的应用分析
  • 利通广场抗浮锚杆的施工技术.kdh
  • 厦门国际邮轮城抗浮锚杆设计与试验
  • 女儿墙抗倾覆验算
  • 宁波环球航运广场成功浇筑
  • 岩石锚杆抗浮在青岛客站地下候车室施工的应用
  • 异型柱框架结构设计探讨
  • 异形柱截面形心计算工具
  • 异形柱截面计算
  • 强制性条文集成
  • 挠度计算
  • 朱炳寅老师关于结构设计相关问题的网上问答
    • [2013年01月更新标准免费下载] |　 13161   首页 上一页 4 5 6 7 8 9 10 11 12 13 14 15 16 17 下一页 尾页

    返回标准资料网首页|www.PV265.com