MSS SP-83-2001
MSS SP-85-2002 法兰端和螺纹端灰铸铁截止阀和角阀 GRAY IRON GLOBE &ANGLE VALVES FLANGED AND THREADED ENDS
MSS SP-9-1992 中文版 青铜、 铁和钢法兰锪平标准
MSS SP110 1996
MSS SP117 1996
MSS SP118 1996
MSS SP120 1997
MSS SP43 2001
MSS SP44 2001
MSS SP53 2002
MSS SP55-2001
MSS SP78 1998
MSS SP81 2001
MSS SP83 2001
MSS SP91 1996
MSS SP93 1999
IEEE 1547.1-2005 带电力系统的设备互连配电资源的合格试验程序
IEEE 1561-2007 远程混合电力系统中酸性铅蓄电池的性能和寿命的优化用指南
IEEE 1562-2007 单机光电(PV)设备中串联电池及电池尺寸用指南
IEEE 1578-2007 固定蓄电池电解质溢出处理和管理的推荐实施规程
IEEE 1580-2001 船用电缆的使用及安装方法
IEEE 1588-2008 IEEE Standard for a Precision Clock Synchronization Protocol for Networked Measurement and Control Systems
IEEE 1615-2007 Network Communication in Electric Power Substations
IEEE 1620-2008 Standard for Test Methods for the Characterization of Organic Transistors and Materials
IEEE 1624-2008 IEEE Standard for Organizational Reliability Capability
IEEE 1625-2008 IEEE Standard for Rechargeable Batteries for Multi-Cell Mobile Computing Devices
IEEE 1631-2008 IEEE Recommended Practice for Measurement of 8-VSB Digital Television Transmission Mask Compliance for the USA
IEEE 1633-2008 IEEE Recommended Practice on Software Reliability
IEEE 1636-2009 IEEE Trial-Use Standard for Software Interface for Maintenance Information Collection and Analysis (SIMICA)
IEEE 1647-2008 IEEE Standard for the Functional Verification Language e
IEEE 1725-2006 Standard for rechargeable batteries for cellular telephones
IEEE 1725-2006 移动电话用可再充电电池标准IEEE Standard for Rechargeable Batteries for Cellular Telephones
IEEE 1776-2008 IEEE Recommended Practice for Thermal Evaluation of Unsealed or Sealed Insulation Systems for AC Electric Machinery Employing Form-
IEEE P802.1AS-D4.0-2008 Draft Standard for Local and Metropolitan Area Networks—Timing and Synchronization for Time-Sensitive Applications
IEEE Special Publication TP-126-0, Series Capacitor Bank Protection
IEEE Standard Defitions of terms for solar cells
IEEE Std 1-2000 电子设备额定值中温度极限和电绝缘评定的一般原则
IEEE Std 100-2000 The Authoritative Dictionary of IEEE Standards Terms Seventh Edition
IEEE Std 101-1987 GUIDE FOR THE STATISTICAL ANALYSIS OF THERMAL LIFE TEST DATA
IEEE Std 108-1955 AIEE No.450-April 1955 Proposed Reconimeitded Guide for Specification of ELECTRONIC VOLTMETERS
IEEE Std 11 01.3-1993 IEEE Mechanical Standard for Conduction-Cooled and Air-cooled 10 SU Modules
IEEE Std 111-2000 宽带(大于1个十进位)变压器的标准
IEEE Std 112-1991 IEEE standard test procedure for polyphase induction motors and generators
IEEE Std 112-1996 Standard Test Procedure for Polyphase Induction Motors and Generators
IEEE Std 112-2004 IEEE Standard Test Procedure for Polyphase Induction Motors and Generators
IEEE Std 114-1982 IEEE standard test procedure for single-phase induction motors
IEEE Std 114-2001 IEEE standard test procedure for single-phase induction motors
IEEE Std 115-1983 IEEE guide test procedures for synchronous machines
IEEE Std 118-1978 Standard Test Code for Resistance Measurement
IEEE Std 119-1974 IEEE recommended practice for testing insulation resistance of rotating machinery
IEEE Std 120-1955 Master Test Code for Electrical Measurements in Power Circuits
IEEE Std 122-1985 IEEE Recommended Practice for Functional and Performance Characteristics of Control Systems for Steam Turbine-Generator Units
IEEE Std 125-2007 IEEE Recommended Practice for Preparation of Equipment Specifications for Speed-Governing
IEEE Std 141-1993 IEEE recommended practice for electric power distribution for industrial plants
IEEE Std 142-2007 IEEE Recommended Practice for Grounding of Industrial and Commercial Power Systems
IEEE Std 145-1983 IEEE Standard Definitions of Terms for Antennas
IEEE Std 145-1993 Standard Definitions of Terms for Antennas
IEEE Std 152-1991 IEEE standard for audio program level measurement
IEEE Std 155-1960 IEEE standards on circuits- definitions of terms for linear signal flow graphs
IEEE Std 167A-1987 IEEE standard facsimile test chart
IEEE Std 167A.2-1996 IEEE standard facsimile test chart：high contrast (gray scale)
IEEE Std 172-1983 IEEE standard definitions of navigation aid terms
IEEE Std 177-1966 Standard definitions and methods of measurement for piezoelectric vibrators
IEEE Std 18-1992 IEEE Standard for Shunt Power Capacitors
IEEE Std 18-2002 IEEE Standard for Shunt Power Capacitors
IEEE Std 181-2003 IEEE standard on transitions, pulses, and related waveforms
IEEE Std 183-1958 IEEE technical committee report- methods for testing radiotelegraph transmitters
IEEE Std 187-1990 IEEE standard on radio receivers open field method of measurement of spurious radiation from FM and television broadcast receivers
IEEE Std 194-1977 IEEE standard pulse terms and definitions
IEEE Std 205-2001 电视 亮度信号电平的测量
IEEE Std 208-1995 IEEE standard on video techniques： measurement of resolution of camera systems, 1993 techniques
IEEE Std 21-1976 General Requirements and Test Procedures for Outdoor Apparatus Bushings
IEEE Std 211-1997 IEEE standard definitions of terms for radio wave propagation
IEEE Std 241-1990 IEEE recommended practice for electric power systems in commercial buildings
IEEE Std 242-1986 IEEE Recommended Practice for Protection and Coordination of Industrial and Commercial Power Systems
IEEE Std 242-2001 errata Corrections to IEEE Recommended Practice for Protection and Coordination of Industrial and
IEEE Std 242-2001 IEEE Recommended Practice for Protection and Coordination of Industrial and Commercial Power
IEEE Std 259-1974(1980) IEEE Standard Test Procedure for Evaluation of Systems of Insulation for Specialty Transformers
IEEE Std 260.1-2004 IEEE Standard Letter Symbols for Units of Measurement (SI Units, Customary Inch-Pound Units, and Certain Other Units
IEEE Std 269-1992 IEEE standard methods for measuring transmission performance of analog and digital telephone sets
IEEE Std 270-2006 Standard Definitions for Selected Quantities, Units and Related Terms with Special Attention to the International System of Units
IEEE Std 272-1970 IEEE Standard for COMPUTER-TYPE (SQUARE-LOOP) PUL SE TRANSFORMERS
IEEE Std 277-1994 IEEE recommended practice for cement plant power distribution
IEEE Std 286-2000 IEEE Recommended Practice for Measurement of Power Factor Tip-Up of Electric Machinery Stator Coil Insulation
IEEE Std 287-2007 IEEE Standard for Precision Coaxial Connectors (DC to 110 GHz)
IEEE Std 295-1969 IEEE Standard for Electronics Power Transformers
IEEE Std 299-2006 Standard Method for Measuring the Effectiveness of Electromagnetic Shielding Enclosures
IEEE Std 303-1991 IEEE recommended practice for auxiliary devices for motors in class 1, groups A, B, C, and D, division 2 locations
IEEE Std 303-2004 IEEE Recommended Practice for Auxiliary Devices for Rotating Electrical Machines in Class I, Division 2 and Zone 2 Locations
IEEE Std 308-1991 IEEE standard criteria for class 1E power systems for nuclear power generating stations
IEEE Std 315-1975(R1993) IEEE Standard American National Standard Canadian Standard Graphic Symbols for Electrical and Electronics Diagrams
IEEE Std 317-1983 IEEE Standard for Electric Penetration Assemblies in Containment Structures for Nuclear Power Generating Stations
IEEE Std 32-1972 IEEE Standard Requirements, Terminology,and Test Procedure for Neutral Grounding
IEEE std 334-1994 IEEE Standard for Qualifying Continuous Duty Class 1E Motors for Nuclear Power Generating Stations
IEEE Std 334-2006 Standard for Qualifying Continuous Duty Class 1E Motors for Nuclear Power Generating Stations
IEEE Std 344-2004 IEEE Recommended Practice for Seismic Qualification of Class 1E Equipment for Nuclear Power Generating Stations
IEEE Std 37.91-2008 电力变压器继电保护导则
IEEE Std 4-1995 IEEE Standard Techniques for High-Voltage Testing
IEEE Std 43-2000 IEEE recommended practice for testing insulation resistance of rotating machinery
IEEE Std 43-2000(R2006) IEEE Recommended Practice for Testing Insulation Resistance of Rotating Machinery
IEEE Std 45-1998 IEEE recommended practice for electric installations on shipboard
IEEE Std 45-2002 船上电气装置的推荐实施规范
IEEE Std 48-1996 Alternating-Current Cable Terminations 2.5 kV Through 765 kV
IEEE Std 4a-2001 Amendment to IEEE standard techniques for high-voltage testing
IEEE Std 58-1978 IEEE Standard Induction Motor Letter Symbols
IEEE Std 62-2005 Guide for Diagnostic Field Testing of Electrc Power Apparatus Part 1 Oil Filled Power Transformers Regulators and Reactors
IEEE Std 67-2005 Guide for Operation and Maintenance of Turbine Generators
IEEE Std 80-2000 Guide for Safety in AC Substation Grounding
IEEE Std 81-1983 Guide for Measuring Earth Resistivity, Ground Impedance
IEEE Std 81.2-1991 Guide for Measurement of Impedance and Safety Characteristics of Large
IEEE Std 82-1994 IEEE standard test procedure for impulse voltage tests on insulated conductors
IEEE Std 82-2002 IEEE Standard Test Procedure for Impulse Voltage Tests on Insulated Conductors
IEEE Std 83-1963 Test Procedure for radial power factor tests on insulating tapes in paper-insulated power cable
IEEE Std 86-1987 IEEE Recommended Practiceefinitions of Basic Per-Unit Quantities for AC Rotating Machines
IEEE Std 94-1991 IEEE recommended definitions of terms for automatic generation control on electric power systems
IEEE Std 95-2002 带直流高压的交流电动机械(2300V及以上)的绝缘试验操作规程
IEEE Std 97-1969 IEEE recommended practice for specifying service conditions in electrical standards
IEEE Std 98-1984 IEEE Standard for the Preparation of Test Procedures for the Thermal Evaluation of Solid Electrical Insulating Materials
IEEE Std 98-2002 IEEE Standard for the Preparation of Test Procedures for the Thermal Evaluation of Solid Electrical Insulating Materials
NFPA 10-2010 Standard for Portable Fire Extinguishers
NFPA 11-1998 低中高倍数泡沫灭火系统标准
NFPA 11-2005 低、中、高膨胀泡沫系统标准
NFPA 11A-1999 中、高倍数泡沫灭火系统
NFPA 12-2005 二氧化碳灭火系统
NFPA 12-2008 Standard on Carbon Dioxide Extinguishing Systems
NFPA 12A-2004 卤代物1301灭火系统
NFPA 13-1999 中文版 撒水系统安装标准
NFPA 13-2007 Standard for the Installation of Sprinkler Systems
NFPA 13-2010 Standard for the Installation of Sprinkler Systems
NFPA 13D-1999 单户及双户住宅水喷淋管道系统的安装标准
NFPA 13D-2007 Standard for the Installation of Sprinkler Systems in One- and Two-Family Dwellings and Manufactured Homes
NFPA 13E-2000 Recommended Practice for Fire Department Operations in Properties Protected by Sprinkler and Standpipe Systems
NFPA 13R-1999 Installation of Sprinkler Systems in Residential Occupancies up to
NFPA 13R-2002 四层及四层以下的住宅的洒水系统的安装
NFPA 14-1996 Standard for the Installation of Standpipe and Hose Systems
NFPA 14-2007 Standard for the Installation of Standpipe and Hose Systems
NFPA 15-1996 Standard for Water Spray Fixed Systems for Fire Protection
NFPA 15-2001 防火用喷水固定系统
NFPA 15-2007 Standard for Water Spray Fixed Systems for Fire Protection
NFPA 16-1999 Standard for the Installation of Deluge Foam-Water Sprinkler Systems
NFPA 16-2007 泡沫水喷洒系统安装标准
NFPA 17-1998 Standard for Dry Chemical Extinguishing Systems
NFPA 17-2002 干化学试剂灭火系统
NFPA 17A-1998 Standard for Wet Chemical Extinguishing Systems
NFPA 17A-2009 Standard for Wet Chemical Extinguishing Systems
NFPA 18-1995 Standard on Wetting Agents
NFPA 18A-2007 Standard on Water Additives for Fire Control
NFPA 20-1999 消防固定水管的安装
NFPA 20-2007 消防固定水管的安装
NFPA 20-2007消防固定水管的安装
NFPA 20-2010 Standard for the Installation of Stationary Pumps for Fire Protection
NFPA 22-2003 专用防火储水罐
NFPA 24-2007 Standard for the Installation of Private Fire Service Mains and Their Appurtenances
NFPA 25-2002 水基灭火系统
NFPA 25-2008 水系消防系统的检查、测试和维护标准
NFPA 25H-2008 Water-Based Fire Protection Systems Handbook
NFPA 30-2000 Flammable and Combustible Liquids Code
NFPA 30-2008 Flammable and Combustible Liquids Code
NFPA 30A-2000 Code for Motor Fuel Dispensing Facilities and Repair Garages
NFPA 30A-2003 汽车修理站和船用码头规程
NFPA 30B-1998 Code for the Manufacture and Storage of Aerosol Products
NFPA 30B-2007 Code for the Manufacture and Storage of Aerosol Products
NFPA 31-2001 Standard for the Installation of Oil-Burning Equipment
NFPA 32-2000 Standard for Drycleaning Plants
NFPA 32-2007 Standard for Drycleaning Plants
NFPA 33-2007 Standard for Spray Application Using Flammable or Combustible Materials
NFPA 34-2000 Standard for Dipping and Coating Processes
NFPA 34-2007 Dipping and Coating Processes Using Flammable or Combustible Liquids
NFPA 35-1999 Standard for the Manufacture of Organic Coatings
NFPA 36-2001 Standard for Solvent Extraction Plants
NFPA 36-2004 溶剂萃取设备标
NFPA 37-1998 Standard for the Installation and Use of SCE AND GT
NFPA 37-2006 固定式内燃机和燃气涡轮机的安装和使用标准
NFPA 40-2007 硝酸纤维胶片的存储和处置标准
NFPA 42-1997 Code for the Storage of Pyroxylin Plastic
NFPA 42-2002 低氮硝化纤维素塑料的存储
NFPA 45-2004 使用化学品的实验室的防火
NFPA 50-1996 Standard for Bulk Oxygen Systems at Consumer Sites
NFPA 50-2001 Standard for Bulk Oxygen Systems at Consumer Sites
NFPA 50A-1999 Gaseous Hydrogen Systems at Consumer Sites
NFPA 50B-1999 Standard for Liquefied Hydrogen Systems at Consumer Sites
NFPA 51-2007 Standard for the Design and Installation of Oxygen–Fuel Gas Systems for Welding, Cutting, and Allied Processes
UL 101-2007 Standard for Leakage Current for Appliances
UL 104-2007 Standard for Elevator Door Locking Devices and Contacts
UL 109-2005 Standard for Tube Fittings for Flammable and Combustible Fluids, Refrigeration Service, and Marine Use
UL 10B-2008 Standard for Fire Tests of Door Assemblies
UL 10C-2009 Positive Pressure Fire Tests of Door Assemblies
UL 122-2001 Photographic Equipment
UL 122-2007 Standard for Photographic Equipment
UL 123-2007 Oxy-Fuel Gas Torches
UL 125-2007 Standard for Valves for Anhydrous Ammonia and LP-Gas (Other Than Safety Relief)
UL 127-2009 Factory-Built Fireplaces
UL 13-2003 Power-Limited Circuit Cables
UL 13-2005 Power-LimitedCircuitCables
UL 13-2007 Standard for Power-Limited Circuit Cables
UL 130-2001 Electric Heating Pads
UL 132-2007 Standard for Safety Relief Valves for Anhydrous Ammonia and LP-Gas
UL 136-2001 Pressure Cookers
UL 136-2004 Pressure Cookers
UL 136-2009 Pressure Cookers
UL 140-2008 Standard for Relocking Devices for Safes and Vaults
UL 141-2007 Standard for Garment Finishing Appliances
UL 142-1998 Steel Aboveground Tanks for Flammable and Combustible Liquids
UL 144-1999 LP-Gas Regulators
UL 153-2002 中文版 便携式照明电灯
UL 153-2005 Portable Electric Luminaires
UL 153-2006 Portable Electric Luminaires
UL 154-2007 Carbon-Dioxide Fire Extinguishers
UL 157-1999 密封垫和填料标准
UL 157-2007 Gaskets and Seals
UL 174-2009 Household Electric Storage Tank Water Heaters
UL 19-2001 Lined Fire Hose and Hose Assemblies
UL 20-2000 General Use Snap Switches
UL 20-2004 Standard for General-Use Snap Switches
UL 20-2008 Genernal-use snap switch
UL 21-2006 液化石油气软管标准
UL 21-2007 Standard for LP-Gas Hose
UL 30-2004 Standard for Metal Safety Cans
UL 30-2009 Metal Safety Cans
UL 32-2004 Standard for Metal Waste Cans
UL 32-2009 Metal Waste Cans
UL 44-2002 Thermoset Insulated Wires and Cables
UL 44-2005 Thermoset-Insulated Wires and Cables
UL 45-2000 Portable Electric Tools
UL 45A-2007 Transportable and Special Purpose Portable Electric Tools
UL 48-2001 Electric Signs
UL 48-2004 Standard for Electric Signs
UL 50-1999 电气设备的外壳
UL 50-2003 Enclosures for Electrical Equipment
UL 50-2003 Standard for Enclosures for Electrical Equipment
UL 50-2007 用于封闭空间的电动设备标准
UL 50E-2007 Enclosures for Electrical Equipment, Environmental Considerations
UL 50V-2007 INFRARED VIEWPORTS
UL 51-2002 Standard for Power-Operated Pumps for Anhydrous Ammonia and LP-Gas
UL 5A-2008 Nonmetallic Surface Raceways and Fittings
UL 5B-2009 Strut-Type Channel Raceways and Fittings
UL 5C-2007 Surface Raceways and Fittings for Use with Data, Signal, and Control Circuits
UL 6-2004 Electrical rigid metal conduit-steel
UL 62-2000 Flexible Cord and Fixture Wire
UL 62-2006 Flexible Cords and Cables
UL 65-2009 Wired Cabinets
UL 66-2002 Fixture Wire
UL 66-2005 Standard for Fixture Wire
UL 67-2006 Standard for Panelboards
UL 69-2006 Standard for Electric-Fence Controllers
UL 69-2009 Standard for Safety for Electric-Fence Controllers
UL 70-2001 Standard for Septic Tanks, Bituminous Coated Metal
UL 72-2001 Tests for Fire Resistance of Record Protection Equipment
UL 72-2005 证明防护设备耐火性试验的标准
UL 73-1998 Motor Operated Appliances
UL 73-2006 Standard for Motor-Operated Appliances
UL 79-2005 Standard for Power-Operated Pumps for Petroleum Dispensing Products
UL 8-2007 Water Based Agent Fire Extinguishers
UL 80 2007 Standard for Steel Tanks for Oil-Burner Fuel
UL 80-2004 Standard for Steel Tanks for Oil-Burner Fuel
UL 80-2008 Standard for Steel Tanks for Oil-Burner Fuel
UL 82-2007 Standard for Electric Gardening Appliances
UL 83-2001 Thermoplastic Insulated Wires and Cables
UL 83-2003 Thermoplastic-Insulated Wires and Cables
UL 83-2006 Thermoplastic-Insulated Wires and Cables
UL 83-2008 Thermoplastic-Insulated Wires and Cables
UL 9-2005 Standard for Fire Tests of Window Assemblies
UL 9-2009 Fire Tests of Window Assemblies
UL 94-1990 中文版 设备和器具部件用塑料材料的可靠性试验
UL 94-1998 设备和装置中塑料材料燃烧性试验标准
UL 94-2001 flammability for plastic
UL 94-2003 Tests for Flammability of Plastic Materials for Parts in Devices and Appliances
UL 94-2006 设备和装置中塑料材料燃烧性试验标准
UL 94-2009 Flammability of Plastic Materials for Parts in Devices and Appliances
UL 96-2005 Standard for Lightning Protection Components
UL 96A-2007 Installation Requirements for Lightning Protection Systems
UL 98-2004 Enclosed and Dead-Front Switches
UL 98-2006 Enclosed and Dead-Front Switches
BS 10-2009 Publishing and copyright information he BSI copyright notice displayed in this document indicates when the document was last issued.
BS 11-1985 铁轨规范
BS 12-1996 Specification for Portland Cement
BS 131.5-1965 Method for Notch Bar Test, Part 5 - Determination of Crystallinity
BS 143 and 1256-1986 Specification for malleable cast iron and cast copper alloy threaded pipe fittings.
BS 144-1-1990 wood preservation using coal tar creosote Part1 Specification for preservitive
BS 144-2-1990 wood preservation using coal tar creosote Part 2 methods for timber treatment
BS 148-1998 Specification for unused and reclaimed mineral insulating oils for transformers and switchgear
BS 148-2009 Reclaimed mineral insulating oil for transformers and switchgear. Specification
BS 159-1992 Specification for high-voltage busbars and busbar connections
BS 18-1987 Tensile testing of metals (including aerospace materials)
BS 182-1972 Specification for Galvanized line-wire for telephone and telegraph purposes
BS 183-1972 一般用镀锌钢丝多股绞合线规范Specification for general purpose galvanized steel wire strand
BS 21-1985 Pipe threads for tubes and fittings where pressure-tight joints are made on the threads
BS 29-1976 specification for carbon steel forgings above 150mm-ruling sections
BS 2A 57-1962 Specification for steel hexagonal-headed shear bolts (B.S.F. threads) for aircraft
BS 2HR 6-2010 镍-铬-铁-钼-钴-钨抗热合金坯料,棒材,锻件和零部件(镍基,Cr 21.7, Fe 18.5, Mo 9, Co 1.5, W 0.6)规范
BS 2TA 100-1973 锻造钛和钛合金的检验和试验规程.
BS 2TA 11-1974 Specification for bar and section for machining of titanium-aluminium-vanadium alloy
BS 302-5：1987 Stranded steel wire ropes. Specification for ropes for hauling purposes
BS 308-1-1984 Maritime Structures - General Criteria - Incorporates amendments
BS 308-1.10-1996 Technical drawings. Screw threads and threaded parts. General conventions
BS 308-1.11-1996 Technical drawings. Screw threads and threaded parts. Screw thread inserts
BS 308-1.12-1995 Technical drawings. Roller bearings. General simplified representation
BS 308-1.13-1997 Technical drawings. Roller bearings. Detailed simplified representation
BS 308-1.14-1995 Technical drawings. Seals for dynamic application. General simplified representation
BS 308-1.15-1995 Technical drawings. Seals for dynamic application. Detailed simplified representation
BS 308-1.16-1997 Technical drawing. Conventional representation of gears
BS 308-1.17-1996 Technical product documentation. Springs. Simplified representation
BS 308-1.18-1996 Technical product documentation. Springs. Presentation of data for cylindrical helical compression springs
BS 308-1.19-1996 Technical product documentation. Springs. Vocabulary
BS 308-1.20-1996 Technical drawings. Screw threads and threaded parts. Simplified representation
BS 308-1.23-1997 Technical drawings. Simplified representation of centre holes
BS 308-1.4-1995 Technical drawings. Scales. This Standard is part of the British Standards Online Service brought to you via IHS
BS 308-1.7-1996 Technical product documentation. Vocabulary. Terms relating to projection methods
BS 308-1.8-1995 Technical drawings. Item references. This Standard is part of the British Standards Online Service brought to you via
BS 308-1.9-1995 Technical drawings. Representation of splines and serrations. This Standard is part of the British Standards Online
BS 308-2-1985 Engineering drawing practice. Recommendations for dimensioning and tolerancing of size
BS 308-2.3-1996 Technical drawings. Dimensioning and tolerancing of profiles
BS 308-3-1990 Engineering drawing practice. Recommendations for geometrical tolerancing
BS 308-3.6-1995 Technical drawings. Symbols for geometrical tolerancing. Proportions and dimensions
BS 308-4.11-1996 Technical product documentation. Handling of computer-based technical information. Security requirements
BS 308-4.12-1996 Technical product documentation. Handling of computer-based technical information. Original documentation
BS 308-4.13-1996 Technical product documentation. Handling of computer-based technical information. Phases in the product design process
BS 308-4.14-1996 Technical product documentation. Handling of computer-based technical information. Document management and retrieval systems
BS 308-4.6-1995 Technical drawings. Simplified representation of pipelines. General rules and orthogonal representation
BS 308-4.7-1995 Technical drawings. Simplified representation of pipelines. Isometric projection
BS 308-4.8-1996 Technical drawings. Simplified representation of pipelines. Terminal features of ventilation and drainage systems
BS 336-1989 Fire hose couplings and ancillary equipment
BS 341.4-2004 移动式气瓶阀门 第4部分：压力泄放装置
BS 350-1-1974 Conversion factors and tables. Basis of tables. Conversion factors
BS 373-1957 无节疤小木材样品的试验方法
BS 381C-1996 Specification for colours for identification, coding and special purposes
BS 3F 128-2010 Specification for cotton webbing suitable for aerospace purposes (warp yarn nominally R 310 tex)
BS 3S 500-1996 Procedure for Inspection, testing and acceptance of steel sheet and strip
BS 4-1-1993 结构钢型材.热轧型钢规范
BS 4-1-2005 结构钢型材.热轧型钢的规范
BS 410-1-2000 试验用筛.技术要求和试验.金属丝网布试验用筛
BS 410-2-2000 Test sieves - technical requirements and testing. Test sieves of perforated metal plate
BS 416-1973 cast iron spigot and socket soil, waste and ventilating pipes
BS 417-2-1987 Specification for galvanized low carbon steel cisterns, cistern lids, tanks and cylinders. Part 2 Metric units
BS 427-1990 Method for Vickers hardness test and for verification of Vickers hardness testing machines
BS 434-1-1984 Bitumen road emulsions (anionic and cationic). Part 1 Specification for bitumen road emulsions
BS 434-2-1984 Bitumen road emulsions (anionic and cationic). Part 2 Code of practice for the use of cationic bitumen road emulsions
BS 436-4-1996 ISO 1328-1-1995 Cylindrical gears — ISO system of accuracy —Part 4
BS 437-2008 Specification for cast iron drain pipes, fittings and their joints for socketed and socketless systems
BS 443-1982 Specification for testing zinc coatings on steel wire and for quality requirements
BS 449-2-1969 Specification for the use of structural steel in building. Metric units
BS 46-1-1958 键和键槽及锥形销.键和键槽规范
BS 460-2002 铸铁雨水管件.规范
BS 476-12-1991 Fire tests on building materials and structures — Part 12 Method of test for ignitability of products by direct flame impingement
BS 476-15-1993 建筑材料和结构的燃烧试验.产品释热的测量方法
BS 476-1：1953 Fire tests on building materials and structures. Foreword
BS 476-20 1987 A1-1990 Fire tests on building materials and structures. Method for determination of the fire resistance of elements of construction
BS 476-20(1987) 建筑构件耐火的测定方法(一般原理)
BS 476-21-1987 Fire tests on building materials and structures. Methods for determination of the fire resistance of loadbearing elements of construction
BS 476-4-1970 Fire tests on building materials and structures. Non-combustibility test for materials
BS 476-5-1979 Method of test of ignitability
BS 476-6-2009 Fire tests on building materials and structures — Part 6 Method of test for fire propagation for products
BS 476-61989 Fire tests on building materials and structures. Method of test for fire propagation
BS 476-7-1997建筑材料和构件的燃烧试验 制品表面火势蔓延的试验和分级方法
BS 476-8-1972 Fire tests on building materials and structures第八部分
BS 489-1999 Specification for Turbine lubricants
BS 499-1-1991 Welding terms and symbols — Part 1 Glossary for welding, brazing and thermal cutting
BS 499-1-2009 Welding terms and symbols Part 1 Glossary for welding, brazing and thermal cutting
BS 499-2-1980 Welding terms and symbols part2 Specification for symbols for welding - Discuz! Board.
BS 499-2C-1999 International Relationships, ISO 2553 Not Equivalent. descriptors, Welded joints, Welding, Joints, Symbols
BS 4A 4 Pt1 Sec2 1967 No legislator may engage in lobbying, as that term is defined in ... (Source Laws
BS 500-2000 Steel sleepers
BS 5N 100-5-2006 航空器供氧系统和设备.包括搬运、储藏和补给与氧气相关的着火和爆炸危害指南
BS 64-1992 Specification for normal and high strength steel bolts and nuts for railway rail fishplates
BS 84-1956 中文版 惠氏牙型圆柱螺纹
BS 84-1956 惠氏直螺纹规范
BS 84-2007 Parallel screw threads of Whitworth form Requirements
BS 90-1975 Specification for direct-acting electrical recording instruments and their accessories
BS 91-1998 电缆焊接插座.规范
BS 93-1951 中文版 B.A.螺纹的尺寸规格 由0到16的公差
BS 93-2008 英国协会(B.A.)螺纹.要求
ASNT SNT-TC-1A-2001
ASNZS 1269.0-2005 Occupational noise management Part 0 Overview and general requirements
ASNZS 1269.1-2005 Occupational Noise Management Part 1 Measurement and Assessment of Noise Immission and Exposure
ASNZS 1269.2-2005 Occupational Noise Management Part 2. Noise Control Management
ASNZS 1269.3-2005 Occupational noise anagement Part 3 Hearing protector program
ASNZS 1269.4-2005 Occupational noise management Part. 4 Auditory assessment
ASSE 1025-1976带软管花洒防虹吸型住宅使用管道龙头的性能要求
BSI PAS 220-2008 Prerequisite programmes on food safety for food manufacturing
BSI PD6493 焊接缺陷验收标准若干方法指南(1980年)
CQI-16 ISO TS16949：2009 指南手册
CSA W47.1-1992 中文版 钢结构熔化焊的公司资格 焊接
CSA Z245.1-02 中文版 管线钢管标准
CSA Z245.1-07 Steel pipe
CSA Z245.11-05 Steel fittings
CSA Z245.20-02 External Fusion Bond Epoxy Coating for Steel Pipe
返回标准资料网首页|www.PV265.com
