文档搜索: (不可包含符号 “ / ”) 搜索帮助?
您的位置:首页 > 按月归档
[20130301标准免费下载] | 
  • JIS K7114-2001 Plastics -- Methods of test for the determination of the effects of immersion in liquid chemicals
  • JIS K7115-1999 塑料拉伸蠕变试验方法
  • JIS K7116-1999 塑料.蠕变性能测定.第2部分三点负荷下的弯曲蠕变
  • JIS K7117-2-1999 塑料.液体或乳液或分散型聚合物树脂.第2部分用规定剪切速率回转粘度计测定粘度
  • JIS K7118-1995 General rules for testing fatigue of rigid plastics
  • JIS K7119-1972 Testing method of flexural fatigue of rigid plastics by plane bending
  • JIS K7120-1987 塑料热重量分析法的测试方法
  • JIS K7120-1987塑料热重量分析法的测试方法
  • JIS K7121-1987 Testing methods for transition temperatures of plastics
  • JIS K7122-1987 Testing methods for heat of transitions of plastics
  • JIS K7123-1987 Testing methods for specific heat capacity of plastics
  • JIS K7124-1-1999 Plastics film and sheeting -- Determination of impact resistance by the free-falling dart method -- Part 1:Staircase methods
  • JIS K7125-1999 Plastics-Film and sheeting-Determination of the coefficients of friction
  • JIS K7126-1-2006 Plastics -- Film and sheeting -- Determination of gas-transmission rate -- Part 1:Differential-pressure method
  • JIS K7126-2-2006 塑料.薄膜和薄板.气体传输率的测定.第2部分等压法
  • JIS K7127-1999 Plastics -- Determination of tensile properties -- Part 3:Test conditions for films and sheets
  • JIS K7128-1-1998 Plastics -- Film and sheeting -- Determination of tear resistance -- Part 1:Trouser tear method
  • JIS K7128-2-1998 Plastics -- Film and sheeting -- Determination of tear resistance -- Part 2:Elmendorf tear method
  • JIS K7128-3-1998 Plastics -- Film and sheeting -- Determination of tear resistance -- Part 3:Right angled tear method
  • JIS K7129-1992 Testing methods for water vapor transmission rate of plastic film and sheeting (instrument method)
  • JIS K7129-2008 塑料.薄膜和薄片.水蒸气透过率的测定.仪器法
  • JIS K7130-1999 Plastics -- Film and sheeting -- Determination of thickness
  • JIS K7131-1994 Testing method for thermally stimulated current of plastic films
  • JIS K7132-1999 Cellular plastics, rigid -- Determination of compressive creep under specified load and temperature conditions
  • JIS K7133-1999 Plastics-Film and sheeting-Determination of dimensional change on heating
  • JIS K7134-1999 Cellular rubber and plastics -- Determination of dynamic cushioning performance
  • JIS K7135-1999 Cellular plastics, rigid -- Determination of compressive creep
  • JIS K7136-2000 Plastics -- Determination of haze for transparent materials
  • JIS K7137-1-2001 Plastics -- Polytetrafluoroethylene (PTFE) semi-finished products -- Part 1:Requirements and designationdesignation
  • JIS K7138-2006 Rigid cellular plastics -- Determination of the volume percentage of open cells and of closed cells
  • JIS K7139-2007 Plastics -- Multipurpose test specimens
  • JIS K7140-1-2000 Plastics -- Acquisition and presentation of comparable single-point data -- Part 1:Moulding materials
  • JIS K7140-1-2008 塑料.可比单点数据的采集和表示法.第1部分模塑材料
  • JIS K7140-2-2007 Plastics -- Acquisition and presentation of comparable single-point data -- Part 2:Long-fibre-reinforced plastics
  • JIS K7141-1-2006 Plastics -- Acquisition and presentation of comparable multipoint data -- Part 1:Mechanical properties
  • JIS K7141-2-2006 Plastics -- Acquisition and presentation of comparable multipoint data -- Part 2:Thermal and processing properties
  • JIS K7141-3-2002 塑料.可比较多点数据的采集和表示.第3部分环境对特性的影响
  • JIS K7142-1996 Determination of the refractive index of plastics
  • JIS K7142-2008 塑料反射指数的测定
  • JIS K7143-1999 Plastics -- Polyamides -- Accelerated conditioning of test specimens
  • JIS K7144-1999 Plastics -- Preparation of test specimens by machining
  • JIS K7145-2000 Plastics -- Aminoplastic moulding materials -- Determination of volatile matter
  • JIS K7146-2006 Plastics -- Epoxy resins -- Determination of 1,2-glycol content
  • JIS K7147-2008 Plastics -- Epoxy resins -- Test methods
  • JIS K7151-1995 Plastics -- Compression moulding test specimens of thermoplastic materials
  • JIS K7151-2009 塑料.热塑性材料的压缩模制试验样品(追補1)
  • JIS K7152-1-1999 塑料.热塑性塑料试样的注射模塑件.第1部分一般原则、多用途和棒状试样模塑件
  • JIS K7152-2-1999 塑料.热塑材料试样的喷射铸造法.第2部分小拉伸棒
  • JIS K7152-3-2006 Plastics -- Injection moulding of test specimens of thermoplastic materials -- Part 3:Small plates
  • JIS K7152-4-2006 Plastics -- Injection moulding of test specimens of thermoplastic materials -- Part 4:Determination of moulding shrinkage
  • JIS K7153-2008 Plastics-Determination of linear dimensions of test specimens
  • JIS K7154-1-2002 塑料热固性粉末模塑复合物(PMCs)试样的注射模塑成形第1部分一般原则和多用途试样的模塑成形
  • JIS K7154-2-2002 塑料.热固性粉末模塑复合物(PMCs)试样的注射模塑成形.第2部分小板材
  • JIS K7160-1996 Plastics -- Determination of tensile-impact strength
  • JIS K7161-1994 Plastics -- Determination of tensile properties -- Part 1:General principles
  • JIS K7162-1994 塑料.拉伸特性的测定.第2部分铸模和挤压塑料的试验条件
  • JIS K7164-2005 塑料.测定拉伸性能.第4部分各向同性和正交异性纤维增强塑料复合物的试验条件
  • JIS K7165-2008 塑料.抗拉性能测定.第5部分单向纤维增强塑料复合材料的试验条件
  • JIS K7170-2008 塑料.设计数据的采集和表示指南
  • JIS K7171-1994 Plastics -- Determination of flexural properties
  • JIS K7171-2008 Plastics-Determination of flexural properties
  • JIS K7181-1994 Plastics -- Determination of compressive properties
  • JIS K7191-1-2007 Plastics -- Determination of temperature of deflection under load -- Part 1:General test method
  • JIS K7191-2-2007 Plastics -- Determination of temperature of deflection under load -- Part 2:Plastics and ebonite
  • JIS K7192-1999 Plastics -- Ethylene-vinyl acetate copolymer (EVAC) thermoplastics -- Determination of vinyl acetate content
  • GB/T23219-2008 烤烟烘烤技术规程
  • GB/T23220-2008 烟叶储存保管方法
  • GB/T23857-2009 生活垃圾填埋场降解治理的监测与检测
  • GB/T23918-2009 三轮汽车 操纵机构的位置、最大操纵力和操纵方法
  • GB/T 23924-2009 三轮汽车和低速货车 干摩擦式离合器
  • GB/T 23940-2009 工业过硫酸盐产品的分析方法
  • GB/T 23953-2009 工业用二甲基二氯硅烷
  • GB/T23958-2009 工业用亚氨基二乙腈
  • GB/T23960-2009 工业用邻苯二酚
  • GB/T23966-2009 工业用二异丙胺
  • GB/T23967-2009 工业用偏苯三酸酐
  • GB/T23976.1-2009 染料 上染速率曲线的测定 上色率测定法
  • GB/T23976.2-2009 染料 上染速率曲线的测定 色深值测定法
  • GB/T 23977-2009 染料 含盐量的测定 电导率法
  • GB/T 23979.1-2009 荧光增白剂 增白强度和色光的测定 棉织物染色法
  • GB/T 23979.2-2009 荧光增白剂 增白强度和色光的测定 纸张染色法
  • GB/T23980-2009 直接染料 拔染性的测定
  • GB/T 24124-2009 C850系列酚醛棉布层压板
  • GB/T 24138-2009 石油树脂
  • GB/T24196-2009 金属和合金的腐蚀 电化学试验方法 恒电位和动电位极化测量导则
  • GB/T24272-2009 热双金属平螺旋形元件机械转矩率试验方法
  • GB/T24310-2009 烟草及烟草制品 转基因检测方法
  • GB/T24317-2009 拉伸羊毛毛条
  • GB/T24351-2009 立式逆流颗粒冷却器 通用技术规范
  • IEC 60079-1-2007 爆炸性气体环境用电气设备.第1部分隔爆外壳“d“型
  • IEC 60079-15-2005 中文版 爆炸性气体环境用电气设备—第15部分:”n”型电气设备的结构、试验和标志
  • IEC 60079-2-2007 易爆气体环境中的电气设备.第2部分增压外壳p
  • IEC 60079-28-2006爆炸性气体环境中使用的电气设备.第28部分用光辐射的传输系统和设备的保护
  • IEC 60079-5-2007 爆炸性气体环境中使用的电气设备.第5部分q型
  • IEC 60079-6-2007 爆炸性气体环境中使用的电气设备.第6部分O型油浸
  • IEC 60079.27-2008爆炸性气体环境用电气设备.第27部分场总线内在安全原理
  • IEC 60120-1984 绝缘子串元件球窝连接尺寸
  • IEC 60287-1-1-2001 电缆电流定额的计算 第1部分 电流定额公式(100%负载因数)和损耗计算 第1节总则(英文)
  • IEC 60287-1-1-2006 电缆额定电流的计算 第1-1部分 额定电流方程(100%负载系数)和电损耗计算.总则(英文)
  • IEC 60287-2-1-1994 电缆电流定额的计算 第2部分 热阻 第1节热阻计算
  • IEC 60287-2-2-1995电缆电流定额的计算 第2部分 热阻 第2节在室外敷防受阳光照射的电缆群的缩减因数的计算方法(英文)
  • IEC 60300-3-1-1991 中文版 可靠性管理.应用指南.第3-1部分可靠性分析技术
  • IEC 60300-3-10-2001 可靠性管理.第3-10部分应用指南.维修性
  • IEC 60300-3-2-1993 中文版 可信性管理.第3-2部分可信性大纲要素和任务
  • IEC 60300-3-3-1996 中文版 可靠性管理.第3部分应用指南.第3节寿命周期成本观察
  • IEC 60300-3-7-1999 可靠性管理.第3-7部分应用指南.电子硬件可靠性压力扫描
  • IEC 60300-3-9-1997 可信性管理 第3-9部分:应用指南 技术系统的风险分析
  • IEC 60309-1-2005 工业用插头插座和耦合器.第1部分 通用要求
  • IEC 60309-2-2005 工业用插头插座和耦合器.第2部分 针头和接触管附件的尺寸可转换性要求
  • IEC 60502-1-1998 额定电压从1kV(Um=1.2kV)到30kV(Um=36kV)的挤压绝缘电力电缆及其附件.第1部分额定电压1kV(Um=1.2kV)和3kV(Um=3.6kV)的电缆
  • IEC 60502-2-1998 额定电压从1kV(Um=1.2kV)到30kV(Um=36kV)的挤压绝缘电力电缆及其附件.第2部分额定电压从1kV(Um=1.2kV)到30kV(Um=36kV)的电缆
  • IEC 60502-4-1997 额定电压1kV(Um=1.2kV)到30kV(Um=36kV)的挤压绝缘电力电缆及其附件.第4部分额定电压6kV(Um=7.2kV)到30kV(Um=36kV)的电缆附件的试验要求
  • IEC 60534-7-1989 工业过程控制阀.第7部分.数据表Industrial-process control valves - Part 7 Control valve data sheet
  • IEC 60534-8-1-2005 工业过程控制阀.第8部分噪声的考虑.第1节流经控制阀的气动流产生的噪声的实验室测量
  • IEC 60534-8-3-2000 工业过程控制阀.第8-3部分噪声的考虑.控制阀的气动噪声预测法
  • IEC 60534-8-4-2005 工业过程控制阀 第8部分:噪声问题 第4节:流动产生的噪声的预测
  • IEC 60534-8.4-2005 勘误
  • IEC 60617-1-1985 Graphical symbols for diagrams - Part 1 General information
  • IEC 60617-12-1997 制图用图形符号.第12部分二进制逻辑元件
  • IEC 60617-13-1993 制图用图形符号.第13部分模拟元件Graphical symbols for diagrams; part 13 analogue elements
  • IEC 60617-2-1996 Graphical symbols for diagrams - Part 2 Symbol elements, qualifying symbols and other symbols having general application
  • IEC 60617-3 -1996 Graphical symbols for diagrams - Part 3 Conductors and connecting devices
  • IEC 60617-5-1996 Graphical symbols for diagrams - Part 5 Semiconductors and electron tubes
  • IEC 60617-6-1996 Graphical symbols for diagrams - Part 6 Production and conversion of electrical energy
  • IEC 60617-8-1996 Graphical symbols for diagrams - Part 8 Measuring instruments, lamps and signalling devices
  • IEC 60617-9-1996 Graphical symbols for diagrams - Part 9 Telecommunications; switching and peripheral equipment
  • IEC 60670-1-2002 家用和类似用途固定电气设施附件外壳.第1部分一般要求
  • IEC 60670-21-2004 家用和类似用途固定电气设施附件盒和外壳.第21部分包括盒与外壳悬挂方法的特殊要求
  • IEC 60670-22-2003 家用和类似用途固定电气设施附件外壳.第22部分接线盒与接线外壳的特殊要求
  • IEC 60670-23-2006 家用和类似用途固定电气设施附件外壳.第23部分地板插座与接线外壳的特殊要求
  • IEC 60670-24-2005 家用和类似用途固定电气设施附件外壳.第24部分家庭保护装置和类似耗电装置外壳的特殊要求
  • IEC 60705-2006 家用微波炉.性能测量方法Household microwave ovens - Methods for measuring performance
  • IEC 60708-2005 带有聚烯烃绝缘和隔湿聚烯烃护套的低频电缆(英文)
  • IEC 60836-2005 电气设备用硅酮液体的规范 Specifications for silicone liquids for electrical purposes
  • IEC 60838-2-2-2006 各式灯座 第2-2部分 特殊要求LED模块用连接器
  • IEC 60839-5-1-1991 警报系统.第5部分警报传输系统要求.第1节系统的一般要求
  • IEC 60839-5-2-1991 警报系统.第5部分警报传输系统要求.第2节设备的一般要求
  • IEC 60839-5-4-1991 警报系统.第5部分警报传输系统要求.第4节利用专用警报传输通路的警报传输系统
  • IEC 60839-5-5-1991 警报系统.第5部分警报传输系统要求.第5节利用公用电话交换网络的数字报知器系统的要求
  • IEC 60840-2004 额定电压30kV(Um=36kV)至150kV(Um=170kV)的挤压绝缘电力电缆
  • IEC 60884-2-5-1995 中文版 家用和类似用途插头插座 第二部分 转换器的特殊要求
  • IEC 61010-2-101-2002 Particular requirements for in vitro diagnostic (IVD) medical equipment
  • IEC 61133-2006 铁路设施 铁路车辆 车辆组装后和运行前的整车试验
  • IEC 61190-1-3-2007 电子组件用连接材料.第1-3部分电子焊接用电子级钎焊合金及有焊剂和无焊剂的固体焊料的要求
  • IEC 61215-2005 中文版 地面用晶体硅光伏组件(PV) –设计鉴定和定型
  • IEC 61215-2005 地面用晶体硅光伏组件(PV) –设计鉴定和定型
  • IEC 61232-1993 电气设备用包铝钢丝
  • IEC 61347-1-2000 灯控制装置 第1部分 总则和安全要求
  • IEC 61347-2-1-2000 灯控制装置 第2-1部分 起动装置的特殊要求(不包括辉光起动器)
  • IEC 61347-2-10-2000 灯控制装置 第2-10部分 冷启动管灯放电(氖管)的高频操作用电子反向器和转化器的特殊要求
  • [20130301标准免费下载] | 

    返回标准资料网首页|www.PV265.com