RSS订阅当前栏目 下载首页| 国家标准 | 行业标准 | 国外标准 | 书籍手册 | 软件工具 | 最新更新 | 下载排行 | 网站地图 | 高级搜索 | 按月归档
文档搜索： （不可包含符号 “ / ”） 搜索帮助？
您的位置:首页 > 按月归档
[20130209标准免费下载] |　 1345    1 2 下一页 尾页
  • 梁验算
  • 检测鉴定交流讲稿
  • 楼梯设计总结
  • 楼梯，阳台，雨棚设计
  • 模型及建筑图
  • 模板支撑专项施工方案
  • 模板设计验算书
  • 模袋混凝土技术在护岸工程中的应用
  • 每米板宽内的钢筋截面面积表
  • 毛石基础
  • 水上餐厅施工平立剖新_recover
  • 水工钢结构设计
  • 水池侧壁及底板配筋计算程序
  • 水池结构设计论文辑
  • 水池计算书
  • 水池说明书
  • 水泥土搅拌墙技术规程JGJT199-2010
  • 水泥土搅拌桩地基变形验算
  • 水泥土搅拌桩深层施工组织设计
  • 水泥土深层搅拌桩(干法)
  • 水泥基渗透结晶型防水材料在带抗浮锚杆地下室底板防水施工中的应用
  • 水泥熟料筒仓在温度和水平压力共同作用下仓壁内力的研究
  • 水电水利工程钻孔压水试验规程
  • 求解结构动力响应的小波分解法
  • 江东超高层抗震审查
  • 江南国际人行天桥检测、试验报告
  • 江苏-预应力溷凝土管桩技术规程DGJ32TJ109-2010
  • 江苏省房屋建筑工程抗震审查细则2008
  • 污水处理-曝气池计算书
  • 污水处理池计算书
  • 沙湾镇鹿川小学-教学楼
  • 深厚砂层抗浮锚杆施工技术
  • 深圳万科施工图设计指导书
  • 深圳公司结构技术措施培训稿
  • 深圳前海湾地铁枢纽上盖物业结构设计
  • 深圳市施工图设计及审查常见疑难问题结构解析汇编（结构最后版）
  • 深圳市结构专业审图
  • 深圳某4层框架别墅结构设计图（含PKPM，效果图）
  • 深圳院结构设计人员培训资料
  • 深基坑、支护工程讲座总结
  • 深基坑开挖与支护工程设计计算与施工
  • 深层搅拌防渗墙施工记录表
  • 深梁计算
  • 温墙模带缝剪力墙非线性有限元分析 (
  • 湿陷性黄土地区建筑规范 GB 50025-2004 [附条文说明]
  • 漩流池地下连续墙
  • 特种结构-第一章-刘志鸿
  • 特种结构（刘志鸿）——水池设计
  • 玄武岩片材加固混凝土双向板的非线性有限元分析
  • 现浇箱梁支架计算书
  • 球罐基本自振周期计算
  • 相对受压区高度
  • 矩形截面偏心受压构件
  • 矩形截面型钢混凝土梁抗弯承载力计算方法探讨
  • 矩形柱
  • 石家庄某大厦筏板混凝土基础的温升分析
  • 码头平面
  • 码头施工方案
  • 砂浆配合比设计软件
  • 碳纤维加固技术在砖混结构加固中的计算
  • 碳纤维片材加固－梁抗弯加固表格
  • 碳纤维片材梁抗弯加固计算表格
  • 碳纤维粘贴增强复合材料加固混凝土工程施工与验收暂行规定修订本
  • 示范 - B类钢筋混凝土结构
  • 箱变基础通用图
  • 箱型转换层图纸
  • 经验模分解及小波分析在结构损伤识别中的应用：试验研究
  • 结-13[S002.AL]
  • 结力求解器教程
  • 结构专业常用表格
  • 结构专业设计统一技术条件
  • 结构专业部分施工图审查技术疑难问题问答-陈德文200807
  • 结构优化设计
  • 结构力学(1)
  • 结构助手
  • 结构图集
  • 结构小构件计算软件包str.exe,版本_v2.0
  • 结构总信息
  • 结构总说明(1)
  • 结构总说明neteasy
  • 结构抗震
  • 结构整体分析报告表
  • 结构新手—如何快速准确布置板钢筋
  • 结构无损检测与小波分析方法
  • 结构检验
  • 结构稳定性的验算与控制
  • 结构说明1
  • 网上问答－朱炳寅
  • 网架结构简化计算手册
  • 美国_半刚性连接研究
  • 美国基于性能的高层建筑结构抗震设计规范
  • 美国房屋结构抗震加固工程实例介绍
  • 美国混凝土结构设计规范
  • 美国统一建筑标准UBC97_vol1
  • 美标计算公式
  • 考试模拟题
  • 联强国际
  • 脚手架jgj130-2011
  • 膨胀加强带的应用原理与施工技术探讨
  • 膨胀螺栓设计参考
  • 节点图1
  • 节点试验公开数据
  • 节点试验竞赛发布
  • 苏J9201-KP1型承重多孔砖及KM1型非承重空心砖砌体
  • 苏州万怡大酒店基础结构设计探讨
  • 苏通大桥钻孔桩施工技术总结
  • 螺旋板式楼梯
  • 螺旋板式楼梯计算
  • 螺旋板式楼梯计算程序兼计算书
  • 螺旋板式楼梯计算程序兼计算书
  • 螺栓及板厚设计
  • 螺栓及板厚设计
  • 裙房加强区
  • 见证取样制度
  • 见证取样方法及数量汇表
  • 角部重叠菱形组合平面的复杂高层建筑结构设计
  • 解压说明含回弹原始数据
  • 解读新高规
  • 论连续弹性地基上框架的計算
  • 论高层层间位移角
  • 设计中的常见问题
  • 设计中的钢筋专业知识
  • 设计基础资料
  • 设计布桩图及打桩结果-Model
  • 设计常用查询
  • 设计框架计算书
  • 设计院方案13.100梁柱结构
  • 设计院方案顶层阁楼梁柱结构
  • 试桩方案
  • 试验方案（范本）
  • 试验检测考试资料（交通工程） 五星级
  • 试验检测资格试题（材料1）
  • 试验检测资格试题（材料2）
  • 谈坡屋面结构计算
  • 谈结构优化设计的一些经验
  • 软土地基处理文章
  • 软弱下卧层
  • 软弱下卧层验算(新)
  • 输煤栈桥结构图
  • 近2年颁布的强制性条文集成
  • 邢台大地震资料[1966]
  • 邱老师讲义建筑地基与地下室设计中常遇问题解析
  • 配电装置平面布置图B
  • 配筋公式
  • 配筋助手0.604[试用版]_Setup
  • 配筋率查询
  • 配筋率计算1.2(1)
  • 配筋表-2003
  • 配置少量剪力墙的框架结构的设计
  • 酒店工程
  • 鑫久水池1
  • 锚杆(索)检测方案
  • 锚杆设计
  • 锚杆静压桩技术规程X
  • 锚钉挡墙
  • 随机振动
  • 隧道工程试验检测技术
  • 隧道工程试验检测技术整理资料
  • 隧道工程（练习题）
  • 隧道检测（较全版本）
  • 隧道题目
  • 需要控制的七个比值及调整方法
  • 静力弹塑性分析
  • 静压预制管桩施工
  • 首届全国既有结构加固改造设计与施工技术交流会
  • 香港风荷载规范
  • JIS H8304-2007 陶瓷喷镀
  • JIS H8306-2009 金属陶瓷热喷镀
  • JIS K5628-2002 铅丹铬酸锌防腐涂料
  • JIS K5629-2002 高铅酸钙防腐涂料标准
  • JIS K5633-2002 浸蚀性底漆标准
  • JIS K5639-2002 氯化橡胶涂料标准
  • JIS K5641-2002 贾如树脂涂料标准
  • JIS K5646-2002 贾如树脂底漆标准
  • JIS K5651-2002 氨基醇酸树脂涂料
  • JIS K5653-2003 丙烯酸树脂清漆
  • JIS K5654-2003 丙烯酸树脂瓷釉标准
  • JIS K5656-2003 建筑用聚氨酯树脂标准
  • JIS K5657-2002 钢结构用聚氨酯树脂涂料
  • JIS K5658-2002 建筑用氟化树脂涂料
  • JIS K5659-2008 钢结构件用氟化树脂涂料
  • JIS K5660-2003 合成树脂的乳胶光泽漆
  • JIS K5660-2008 Glossy synthetic resin emulsion paint
  • JIS K5661-1970 建筑用耐火涂料
  • JIS K5663-2003 合成树脂乳胶密封漆
  • JIS K5663-2008 合成树脂乳胶密封漆(修改件1)
  • JIS K5664-2002 Tar epoxy resin paint
  • JIS K5665-2008 路面标志用涂料
  • JIS K5667-2003 多色涂料标准
  • JIS K5668-2003 起纹理的涂料(合成树脂乳浊型)
  • JIS K5668-2008 起纹理的涂料(合成树脂乳浊型)(修改单1)
  • JIS K5669-2008 Synthetic resin emulsion putty
  • JIS K5670-2003 无水分散丙烯酸涂料
  • JIS K5670-2008 无水分散丙烯酸涂料(修改件1)
  • JIS K5674-2008 无铅无铬的防锈漆
  • JIS K5701-1-2000 平版印刷油墨.第1部分试验方法
  • JIS K5701-2-2000 Lithographic Inks -- Part 2：Colour and transparency of ink sets for four-colour-printing
  • JIS K5902-1969 松香标准
  • JIS K5902-2006 松香标准(修改件1)
  • JIS K5906-1998 涂料用铝颜料
  • JIS K5906-2009 涂料用铝颜料(修改件1)
  • JIS K5909-1994 虫胶标准
  • JIS K5911-1994 漂黄白胶标
  • JIS K5950-1979 精制漆
  • JIS K5981-2006 Thermoplastic and thermosetting powder coated films
  • JIS K6200-1998 Rubber -- Vocabulary
  • JIS K6200-2008 Rubber-Vocabulary
  • JIS K6216-1-2001 Carbon black for rubber industry -- General matters -- Part 1：Carbon black shipment sampling procedures
  • JIS K6216-2-2001 Carbon black for rubber industry -- General matters -- Part 2：Standard reference blacks
  • JIS K6217-4-2001 Carbon black for rubber industry -- Fundamental characteristics -- Part 4：Determination of dibutylphthalate absorption number
  • JIS K6217-5-2001 Carbon black for rubber industry -- Fundamental characteristics -- Part 5：Determination of tinting strength
  • JIS K6217-6-2008 Carbon black for rubber industry -- Fundamental characteristics -- Part 6
  • JIS K6217-7-2008 Carbon black for rubber industry -- Fundamental characteristics -- Part 7
  • JIS K6218-1-2005 Carbon black for rubber industry -- Secondary characteristics -- Part 1：Determination of loss on heating
  • JIS K6218-2-2005 Carbon black for rubber industry -- Secondary characteristics -- Part 2：Determination of ash
  • JIS K6218-3-2005 Carbon black for rubber industry -- Secondary characteristics -- Part 3：Determination of sieve residue
  • JIS K6218-4-2005 Carbon black for rubber industry -- Secondary characteristics -- Part 4：Determination of light transmittance of toluene extract
  • JIS K6218-5-2005 Carbon black for rubber industry -- Secondary characteristics -- Part 5：Determination of solvent extractable material
  • JIS K6219-1-2006 Carbon black for rubber industry -- Characteristics of pelletized carbon black -- Part 1：Determination of fines content
  • JIS K6219-2-2006 Carbon black for rubber industry -- Characteristics of pelletized carbon black -- Part 2：Determination of pour density
  • JIS K6219-4-2006 Carbon black for rubber industry -- Characteristics of pelletized carbon black -- Part 4：Determination of pellet size distribution
  • JIS K6220-1-2001 Rubber compounding ingredients -- Test methods -- Part 1：General
  • JIS K6220-2-2001 Rubber compounding ingredients -- Test methods -- Part 2：Organic accelerators and vulcanizing agents
  • JIS K6220-3-2001 橡胶混合配料.试验方法.第3部分 抗降解剂
  • JIS K6222-1-2004 Rubber compounding ingredients -- Sulfur -- Methods of test
  • JIS K6222-2-1998 Sulfur powder for rubber
  • JIS K6226-2-2003 橡胶和橡胶制品.用热重量分析法测定硫化橡胶和未硫化化合物的成分.第2部分丙烯腈丁二烯和卤丁基橡胶
  • JIS K6227-1998 Rubber -- Determination of carbon black content -- Pyrolytic and chemical degradation methods
  • JIS K6228-1998 Rubber -- Determination of ash
  • JIS K6229-2007 Rubber -- Determination of solvent extract
  • JIS K6230-2006 Rubber -- Identification -- Infrared spectrometric method
  • JIS K6231-2-2007 Rubber -- Analysis by pyrolytic gas-chromatographic methods -- Part 2：Determination of styrene, butadiene, isoprene ratio
  • JIS K6231-2004 Rubber -- Identification of polymers (single polymers and blends) -- Pyrolytic gas chromatographic method
  • JIS K6232-1998 Rubber products -- Determination of zinc contents -- EDTA titrimetric method
  • JIS K6233-1-1998 Rubber -- Determination of total sulfur content -- Part 1：Oxygen combustion flask method
  • JIS K6233-2-1998 Rubber -- Determination of total sulfur content -- Part 2：Sodium peroxide fusion method
  • JIS K6233-3-1998 Rubber -- Determination of total sulfur content -- Part 3：Furnace combustion method
  • JIS K6234-1998 Rubber -- Determination of free sulfur
  • JIS K6235-2006 Rubber, raw -- Determination of residual unsaturation in HNBR by iodine value
  • JIS K6236-2001 Rubber, raw styrene-butadiene, emulsion-polymerized -- Determination of bound styrene content -- Refractive index method
  • JIS K6237-2001 Rubber, raw styrene-butadiene -- Determination of soap and organic-acid content
  • JIS K6238-1-2009 Rubber, raw-Determination of volatile-matter content- Part 1Hot mill method and oven method
  • JIS K6238-2-2009 Rubber, raw-Determination of volatile-matter content-Part 2 Thermogravimetric method using automatic analyzer with infrared drying
  • JIS K6238-2001 Rubbers, raw -- Determination of volatile-matter content
  • JIS K6239-2007 Rubber, raw, S-SBR -- Determination of the microstructure
  • JIS K6249-2003 Testing methods for uncured and cured silicone rubber
  • JIS K6250-2001 橡胶物理试验方法通则
  • JIS K6250-2006 Rubber -- General procedures for preparing and conditioning test pieces for physical test methods
  • JIS K6251-1993 硫化橡胶的抗拉试验方法
  • JIS K6251-2004 硫化橡胶和热塑性橡胶 抗拉强度测定
  • JIS K6252-2001 硫化橡胶和热塑性橡胶 撕裂强度测定
  • JIS K6252-2007 Rubber, vulcanized or thermoplastic -- Determination of tear strength
  • JIS K6253-1997 硫化橡胶和热塑性橡胶 硬度试验方法
  • JIS K6253-2006 Rubber, vulcanized or thermoplastic -- Determination of hardness
  • JIS K6254-2003 硫化橡胶和热塑性橡胶 低伸长应力-应变性能测定
  • JIS K6255-1996 硫化橡胶和热塑性橡胶 弹性性能测试方法
  • JIS K6256-1-2006 Rubber, vulcanized or thermoplastic -- Determination of adhesion test -- Part 1：Adhesion to textile fabric
  • JIS K6256-1999 硫化橡胶和热塑性橡胶 粘接性能测试方法
  • JIS K6256-3-2006 Rubber, vulcanized or thermoplastic -- Determination of adhesion test -- Part 3：Adhesion to metal -- Two-plate method
  • JIS K6257-2003 硫化橡胶和热塑性橡胶 热老化性能测定
  • JIS K6258-2003 硫化橡胶和热塑性橡胶 耐液体性能测定
  • JIS K6259-1993 Testing methods of resistance to ozone cracking for vulcanized rubber
  • JIS K6259-2004 硫化橡胶和热塑性橡胶 耐臭氧性能测定
  • JIS K6260-1999 硫化橡胶和热塑性橡胶 屈挠试验方法
  • JIS K6261-1997 硫化橡胶和热塑性橡胶 低温试验方法
  • JIS K6261-2006 Rubber, vulcanized or thermoplastic -- Determination of low temperature properties
  • JIS K6262-1997 硫化橡胶和热塑性橡胶 固定伸张试验方法
  • JIS K6262-2006 Rubber, vulcanized or thermoplastic -- Determination of compression set at ambient, elevated or low temperatures
  • JIS K6263-2004 硫化橡胶和热塑性橡胶 应力松弛测定
  • JIS K6264-1-2005 Rubber, vulcanized or thermoplastic -- Determination of abrasion resistance -- Part 1：Guide
  • JIS K6264-2-2005 Rubber, vulcanized or thermoplastic -- Determination of abrasion resistance --Part 2：Testing methods
  • JIS K6265-2001 Rubber, vulcanized and thermoplastic -- Determination of temperature rise and resistance to fatigue in flexometer testing
  • JIS K6266-1996 Testing methods of weatherability for rubber, vulcanized or thermoplastic
  • JIS K6266-2007 硫化或热塑橡胶耐气候性的试验方法
  • JIS K6267-2006 Rubber, vulcanized or thermoplastic -- Determination of stain properties
  • JIS K6268-1998 硫化橡胶—密度测定
  • JIS K6269 1998 用氧指数法进行硫化橡胶和热塑性橡胶燃烧性试验的方法
  • JIS K6270 2001 硫化橡胶和热塑性橡胶—拉伸疲劳特性的测定方法—定应变法
  • JIS K6271-2001 硫化橡胶或热塑性塑料 体积和表面电阻率测定
  • JIS K6272-2003 Rubber -- Tensile, flexural and compression test equipment (constant rate of traverse) -- Specification
  • JIS K6273-2006 Rubber, vulcanized or thermoplastic -- Determination of tension set, elongation and creep
  • JIS K6274-2006 Rubber and plastics -- Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
  • JIS K6298-2004 Rubber, raw natural and raw synthetic -- Sampling
  • JIS K6298-2009 Rubber, raw natural and raw synthetic- Sampling and further preparative procedures
  • JIS K6299-2001 Rubber -- Preparation of test pieces
  • JIS K6300-2-2001 Rubber, unvulcanized -- Physical property -- Part 2：Determination of cure characteristics with oscillating curemeters
  • JIS K6302-1994 Pneumatic tyres for bicycles
  • JIS K6304-1994 Inner tubes for bicycle tyres
  • JIS K6316-1998 Vulcanized particulate rubber
  • JIS K6322-1999 Ply construction conveyor belts
  • JIS K6323-1995 Classical V belts for power transmission
  • JIS K6323-1995 英文版 动力传送用普通三角皮带
  • JIS K6324-2000 耐火输送机胶带.分类和试验方法
  • JIS K6330-1-2003 橡胶和塑料软管的测试方法.第1部分软管和软管组件尺寸的测量方法
  • JIS K6330-10-1998 橡胶和塑料软管的试验方法.第10部分通过软管壁对液体传输进行的测定
  • JIS K6330-2-1998 橡胶和塑料软管的测试方法.第2部分液体静力法
  • JIS K6330-3-1998 橡胶和塑料软管的测试方法.第2部分抽吸阻力的测定
  • JIS K6330-4-2003 橡胶和塑料软管的测试方法.第4部分低于室温的弯曲试验
  • JIS K6330-5-1998 橡胶和塑料软管的试验方法.第5部分电阻的测定
  • JIS K6330-6-1998 橡胶和塑料软管的测试方法.第6部分部件间附着力的测定
  • JIS K6330-7-1998 橡胶和塑料软管的试验方法.第7部分静态条件下对臭氧抗性的评估
  • JIS K6330-8-1998 橡胶和塑料软管的试验方法.第8部分无收缩的液压脉冲试验
  • JIS K6330-9-2003 橡胶和塑料软管的测试方法.第9部分软管和管件的弯曲性能
  • JIS K6343-2004 Rubber hoses for oil discharge
  • JIS K6346-1999 Rubber hoses and hose assemblies -- On-shore oil suction and discharge -- Specification
  • JIS K6348-2006 Rubber tubes for gas
  • JIS K6349-1-1999 Wire reinforced rubber hoses for hydraulic－Part 1 Rubber hoses and hose assemblies－Wire-reinforced hydraulic type－Specification
  • JIS K6349-1-1999 液压用钢丝增强橡胶软管 第1部分橡胶软管和软管组件 线增强液压型 规范
  • JIS K6349-2-1999 Wire reinforced rubber hoses for hydraulic－Part 2 Rubber hoses and hose assemblies－Rubber-covered, spiral wire reinforced, hydraulic type－Specification
  • JIS K6349-2-1999 液压用钢丝增强橡胶软管 第2部分橡胶软管和软管组件 橡胶包覆的螺旋线增强液压型 规范
  • JIS K6349-3-1999 Wire reinforced rubber hoses for hydraulic－Part 3 Wire reinforced rubber hoses
  • JIS K6349-3-1999 液压用钢丝增强橡胶软管.第3部分线增强橡胶软管
  • JIS K6351-2006 Wire reinforced rubber hoses and hose assemblies for gas
  • JIS K6352-2005 天然橡胶(NR).试验方法
  • JIS K6353-1997 水用橡胶产品
  • JIS K6353-2006 水用橡胶产品(修改件1)
  • JIS K6353-2009 水用橡胶产品(修改件2)
  • JIS K6366-1998 Motorcycle tyres
  • JIS K6368-1977 E Narrow V Belts for Power Transmission
  • JIS K6368-1999 Narrow V belts for power transmission
  • JIS K6369-2007 Steel cord conveyor belts
  • JIS K6370-1999 Compounded stock for retread and repair
  • JIS K6372-1995 英文版 动力传送用同步传送带
  • JIS K6373-1995 Synchronous belts for light duty power transmission
  • JIS K6374-2008 Light conveyor belts - Tolerances on widths and lengths of cut light conveyor belts
  • JIS K6374-2008 Light conveyor belts -- Tolerances on widths and lengths of cut light conveyor belts
  • JIS K6375-1999 塑料软管和软管组件.液压型织物增强的热塑性塑料.规范
  • JIS K6376-2009 Light conveyor belts-Determination of the maximum tensile strength
  • JIS K6379-1999 Rubber hoses and hose assemblies -- Textile-reinforced hydraulic type -- Specification
  • JIS K6380-1999 橡胶填料
  • JIS K6380-1999
  • JIS K6380-1999橡胶填料Rubber packing material
  • JIS K6383-2001 Styrene-butadiene rubber (SBR) -- Emulsion-and solution-polymerized types -- Evaluation procedures
  • JIS K6384-2001 丁腈橡胶(NBR).评定程序
  • JIS K6385-2001 橡胶阻振器的试验方法
  • JIS K6386-1999 Rubber materials for vibration isolators
  • JIS K6387-1-2005 Rubber latex -- Part 1- Sampling
  • JIS K6387-2-1998 Latex, rubber -- Determination of total solids content
  • JIS K6388-2001 Chloroprene rubber (CR) -- General-purpose types -- Evaluation procedure
  • JIS K6389-2007 Halogenated isobutene-isoprene rubber (BIIR and CIIR) -- Test methods
  • JIS K6394-1998 硫化或热塑橡胶的动态特性试验方法
  • JIS K6394-2007 Rubber, vulcanized or thermoplastic -- Determination of dynamic properties -- General guidance
  • JIS K6395-2003 橡胶,乙丙橡胶二烯烃(EPDM)--试验方法
  • JIS K6396-2007 Isobutene-isoprene rubber (IIR) -- Test methods
  • JIS K6400-1-2004 挠性多孔聚合材料.物理性能的测定.第1部分 总则
  • JIS K6400-2-2004 挠性多孔聚合材料.物理性能的测定.第2部分 压缩硬度(压痕技术)和压缩应力应变特性
  • JIS K6400-3-2004 挠性多孔聚合材料.物理性能的测定.第3部分 回弹性
  • JIS K6400-4-2004 挠性多孔聚合材料.物理性能的测定.第4部分 压缩变形和疲劳特性
  • JIS K6400-5-2004 挠性多孔聚合材料.物理性能的测定.第5部分 抗拉强度、断裂时的伸长率和撕裂强度
  • JIS K6400-6-2004 挠性多孔聚合材料.物理性能的测定.第6部分燃烧特性
  • JIS K6400-7-2004 挠性多孔聚合材料.物理性能的测定.第7部分透气性
  • JIS K6401-2005 Polymeric materials, cellular flexible-Polyurethane foam for load-bearing applications-Specification
  • JIS K6403-1999 汽车用硫化橡胶的分类系统
  • JIS K6404-1-1999 橡胶或塑料涂覆织物 调节和测试的标准环境
  • JIS K6404-12-1999 橡胶或塑料涂覆织物的试验方法 第12部分加速老化试验
  • JIS K6404-13-1999 橡胶或塑料涂覆织物的试验方法 第13部分低温弯曲试验
  • JIS K6404-14-1999 橡胶或塑料涂覆织物的试验方法 第14部分粘结阻力的测定
  • JIS K6404-15-1999 橡胶或塑料涂覆织物的试验方法 第15部分水蒸气的渗透率
  • JIS K6404-2-1-1999 橡胶或塑料涂覆织物的试验方法 卷料参数的测定 第1部分一卷的长度、宽度和净重的测定方法
  • JIS K6404-2-2-1999 橡胶或塑料涂覆织物的试验方法 第2部分每单位面积总质量、涂料质量和衬底每单位面积质量的测定方法
  • JIS K6404-2-3-1999 橡胶或塑料涂覆织物的试验方法 卷料参数的测定
  • JIS K6404-4-1999 橡胶或塑料涂覆织物的试验方法 第4部分抗撕裂强度的测定
  • JIS K6404-5-1999 橡胶或塑料涂覆织物的试验方法 第5部分涂料粘性的测定
  • JIS K6418-2007 Thermoplastic elastomers -- Nomenclature and abbreviated terms
  • JIS K6422-2007 Rubber vibration isolators -- Classification standard and testing methods
  • JIS K6430-2008 Rubber compounding ingredients -- Silica -- Test methods
  • JIS K6505-1995 Testing method for man-made upper material of shoes
  • JIS K6545-1994 Testing method for flexing endurance of light leathers and their surface finishes
  • JIS K6601-1995 Man-made upper material of shoes
  • JIS K6723-1995 Plasticized polyvinyl chloride compounds
  • JIS K6723-1995 增塑聚氯乙烯化合物
  • JIS K6723-2006 Plasticized polyvinyl chloride compounds(Amendment 1)
  • JIS K6729-1977 Testing methods for polyvinyl formal
  • JIS K6734-2000 塑料.未增塑的聚氯乙烯板
  • JIS K6735-2006 Plastics -- Polycarbonate sheets -- Types, dimensions and characteristics
  • JIS K6739-2007 Unplasticized poly (vinyl chloride) (PVC-U) pipe fittings for drain
  • JIS K6741-2007 Unplasticized poly (vinyl chloride) (PVC-U) pipes
  • JIS K6742-2007 Unplasticized poly (vinyl chloride) (PVC-U) pipes for water supply
  • JIS K6743-2007 输水用硬质聚氯乙烯管接头
  • JIS K6743-2009 输水用硬质聚氯乙烯管接头(修改件1)
  • JIS K6744-1992 聚氯乙烯覆膜金属板
  • JIS K6744-2007 聚氯乙烯涂覆的和层压金属薄板(修改件1)
  • JIS K6745-2008 Plastics-Unplasticized poly (vinyl chloride) sheets
  • JIS K6759-1995 丙烯腈的试验方法
  • JIS K6766-2008 金属表面的聚乙烯薄膜的测试方法
  • JIS K6769-2004 交联聚乙烯(PE-X)管
  • JIS K6769-2009 交联聚乙烯(PE-X)管(修改件1)
  • JIS K6770-2004 交联聚乙烯(PE-X)管配件
  • JIS K6770-2008 交联聚乙烯(PE-X)管配件(修改件1)
  • JIS K6770-2009 Crosslinked polyethylene (PE-X) pipe fittings(修改件2)
  • JIS K6771-1995 柔性乙烯管件
  • JIS K6772-1994 Polyvinylchloride coated fabric
  • JIS K6773--2007 聚氯乙烯截水薄板(修改件1)
  • JIS K6774-2005 气体燃料供应用聚乙烯管
  • JIS K6776-2007 Chlorinated poly (vinyl chloride) (PVC-C) pipes for hot and cold water supply
  • JIS K6777-2007 冷热水供水系统用氯化聚氯乙烯(PVC-C)管道配件
  • JIS K6777-2009 冷热水供水系统用氯化聚氯乙烯(PVC-C)管道配件(追補1)
  • JIS K6778-2004 聚烯烃(PB)管
  • JIS K6778-2009 聚烯烃(PB)管(追補1)
  • JIS K6779-2004 聚烯烃(PB)管配件
  • JIS K6779-2009 聚烯烃(PB)管配件(追補1)
  • JIS K6780-2003 外墙用聚乙烯管
  • JIS K6783-1994 农业用乙烯乙酸乙烯共聚物薄膜
  • JIS K6783-2009 农业用乙烯乙酸乙烯共聚物薄膜(追補1)
  • JIS K6787-2004 给水用交联聚乙烯管(PE-X)
  • JIS K6787-2009 给水用交联聚乙烯管(PE-X)(追補1)
  • JIS K6788-2004 给水用交联聚乙烯管(PE-X)配件
  • JIS K6788-2009 给水用交联聚乙烯管(PE-X)配件(追補1)
  • JIS K6792-2004 给水用聚烯烃管(PB)
  • JIS K6792-2009 给水用聚烯烃管(PB)(追補1)
  • JIS K6793-2004 给水用聚烯烃管(PB)配件
  • JIS K6793-2009 给水用聚烯烃管(PB)配件(追補1)
  • JIS K6804-2003 Poly(vinylacetate)emulsion adhesives for woods
  • JIS K6806-2003 木材用水性高分子异氰酸酯胶粘剂(正误表)
  • JIS K6806-2003 木材用水性高分子异氰酸酯胶粘剂
  • JIS K6806-2003 水性高分子－异氰酸酯木材粘接剂
  • JIS K6816-2008 Thermoplastics pipes and fittings- Test method for Vicat softening temperature
  • JIS K6850-1999 Adhesives－Determination of tensile lap-shear strength of rigid-to-rigid bonded assemblies
  • JIS K6852-1994 压缩载荷时胶粘剂抗剪切强度试验方法
  • JIS K6854-1-1999 Adhesives -- Determination of peel strength of bonded assemblies -- Part 1：90 degree SIGN peel
  • JIS K6854-1-1999
  • JIS K6854-2-1999 Adhesives－Determination of peel strength of bonded assemblies－Part2 180°peel
  • JIS K6867-1999 胶粘剂.结构粘结部件耐久性的特性.楔形破裂试验
  • JIS K6869-2009 Plastics-Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography
  • JIS K6876-1-2006 塑料.丙烯腈-苯乙烯-丙烯酸脂(ASA)、丙烯腈-(乙烯-丙烯-二烯)-苯乙烯(AEPDS)和丙烯腈-(聚氯乙烯)-苯乙
  • JIS K6876-2-2007 塑料.丙烯腈-苯乙烯-丙烯酸酯(ASA)、丙烯腈-(乙烯-丙烯-二烯烃)-苯乙烯(AEPDS)和丙烯腈-(聚氯乙烯)-苯乙烯
  • JIS K6883-2008 Plastics -- Perfluoroalkoxyalkane (PFA) tubes
  • JIS K6891-1995 压缩成型用粉试验方法
  • JIS K6896-1995 PTFE树脂粉
  • JIS K6899-1-2006 Plastics -- Symbols and abbreviated terms -- Part 1：Basic polymers and their special characteristics
  • JIS K6902-2007 层状热固高压装饰板的试验方法
  • JIS K6902-2008 Testing method for laminated thermosetting high-pressure decorative sheets(Amendment 1)
  • JIS K6903-2007 层压热固高压装饰板Laminated thermosetting high-pressure decorative sheets
  • JIS K6903-2008 层状热固高压装饰板
  • JIS K6910-2007 Testing methods for phenolic resins
  • JIS K6911-1995 热固性塑料的试验方法
  • JIS K6911-2006 Testing methods for thermosetting plastics
  • JIS K6915-1-2006 Plastics -- Phenolic moulding compounds -- Part 1：Designation system and basis for specifications
  • JIS K6915-2-2006 Plastics -- Phenolic moulding compounds -- Part 2：Preparation of test specimens and determination of properties
  • JIS K6915-2006 Phenolic moulding compounds
  • JIS K6916-1-2006 Plastics -- Urea-formaldehyde moulding compounds -- Part 1：Designation system and basis for specifications
  • JIS K6916-2-2006 Plastics -- Urea-formaldehyde moulding compounds -- Part 2：Preparation of test specimens and determination of properties
  • JIS K6916-2006 Urea-formaldehyde moulding compounds
  • JIS K6917-1-2006 Plastics -- Melamine-formaldehyde moulding compounds -- Part 1：Designation system and basis for specifications
  • JIS K6917-2-2006 Plastics -- Melamine-formaldehyde moulding compounds -- Part 2：Preparation of test specimens and determination of properties
  • JIS K6917-2006 Melamine-formaldehyde moulding compounds
  • JIS K6918-2007 Diallyl phthalate moulding compounds
  • JIS K6919-1992 纤维增强塑料用液态不饱和聚酯树脂(追補1)
  • JIS K6919-1992 纤维增强塑料用液态不饱和聚酯树脂
  • JIS K6930-1994 农业用聚氯乙烯薄膜回收颗粒状铸模材料
  • JIS K6930-2009 农业用聚氯乙烯薄膜回收颗粒状铸模材料(追補1)
  • JIS K6932-2007 Recycled plastics stakes
  • JIS K6938-1-2006 塑料－甲基丙烯酸甲酯丙烯腈丁二烯苯乙烯(MABS)模塑和挤压材料－第1部分：命名系统及规格标志的基础
  • JIS K6938-2-2007 塑料.甲基丙烯酸甲酯-丙烯腈-丁二烯-苯乙烯(MABS)模塑和挤塑材料.第2部分试样制备和性能测定
  • JIS K6960-2008 塑料.在高固相厌氧消化条件下测定最终厌氧生物降解.释放的沼气分析法
  • JIS K7001-1990 Amylase for industrial use
  • JIS K7002-1988 Glucose isomerase for industrial use
  • JIS K7010-1995 Vocabulary for fibre reinforced plastic
  • JIS K7011-1989 Glass fiber reinforced plastics for structural use
  • JIS K7012-1999 Glass-fiber reinforced thermosetting resin chemical-resistant tanks
  • JIS K7013-1997 Fibre reinforced plastic pipes
  • JIS K7013-2009 纤维增强塑料管(追補1)
  • DIN 13-1-1999 通用ISO米制螺纹.第1部分粗牙螺纹的公称尺寸.螺纹公称直径1--68mm
  • DIN 13-20-2000 一般用途的ISO米制螺纹.第20部分带优先公差级的粗牙螺纹的尺寸极限.公称直径1-68mm
  • DIN 13-24-2005 ISO 米制螺纹 公称直径112-180mm细牙螺纹的极限尺寸 常用公差等级
  • DIN 13-5-1999 通用ISO米制螺纹.第5部分螺距1mm和1,25mm的细牙螺纹的公称尺寸.螺纹公称直径7,5--200mm
  • DIN 13-51-2005 ISO通用米制螺纹.第51部分过渡配合用外螺纹(以前静配合用螺纹).公差、极限偏差、尺寸极限
  • DIN 13-7-1999 通用ISO米制螺纹 第7部分 螺距2mm的细牙螺纹的公称尺寸.螺纹公称直径17--300mm
  • DIN 168-1979 中文版 圆螺纹 螺纹尺寸
  • DIN 267-24-2007 紧固件交货技术条件.第24部分不带规定验证载荷值的螺母用硬度等级
  • DIN 267-26-2005
  • DIN 267-28 2007 紧固件.第28部分带压紧层的钢制螺钉、螺栓和螺柱.技术规范
  • DIN 32-3-1981
  • DIN 5412-1-1982 滚动轴承.圆柱滚柱轴承.第1部分单列,带保持架,可分离的斜挡圈的滚动轴承
  • DIN 5412-4-1982 Rolling bearings - Cylindrical roller bearings - Part 4 Double row, with cage, increased accuracy
  • DIN 5419-1959 E毛毡圈
  • DIN 5480-1-2006
  • DIN 5480-10-1991 渐开线花键轴连接.啮合角30°.模数5的基础尺寸和试验尺寸
  • DIN 5480-11-1991 渐开线花键轴连接.啮合角30°.模数6的基础尺寸和试验尺寸
  • DIN 5480-12-1991 渐开线花键轴连接.啮合角30°.模数8基础尺寸和试验尺寸
  • DIN 5480-13-1991 渐开线花键轴连接.啮合角30°.模数10基础尺寸和试验尺寸
  • DIN 5480-14-1986 渐开线花键轴连接.啮合角30°.侧面配合.公差
  • DIN 5480-15-2006
  • DIN 5480-16-2006
  • DIN 5480-2-2006
  • DIN 5480-3-1991 渐开线花键轴连接.啮合角30°.模数0.5、0.6、0.75、0.8和1的基础尺寸和试验尺寸
  • DIN 5480-4-1991 渐开线花键轴连接.啮合角30°.模数1.25的基础尺寸和试验尺寸
  • DIN 5480-5-1991 渐开线花键轴连接.啮合角30°.模数1.7和1.75的基础尺寸和试验尺寸
  • DIN 5480-6-1991 渐开线花键轴连接.啮合角30°.模数2的基础尺寸和试验尺寸
  • DIN 5480-7-1991 渐开线花键轴连接.啮合角30°.模数2.5的基础尺寸和试验尺寸
  • DIN 5480-8-1991 渐开线花键轴连接.啮合角30°.模数3的基础尺寸和试验尺
  • DIN 5480-9-1991 渐开线花键轴连接.啮合角30°.模数4的基础尺寸和试验尺寸
  • DIN 5480花键计算程序2009版
  • DIN 5482 渐开线花键 中文参考版
  • DIN 5482 渐开线花键标准
  • DIN 5510-1-1988
  • DIN 5510-2-2003
  • DIN 5510-4-1988
  • DIN 5510-5-1988
  • DIN 5510-6-1988
  • DIN 5512-1-1997
  • DIN 5512-2-1997
  • DIN 5512-4-1997
  • DIN 5687-1-1996
  • DIN 6172-1993
  • DIN 6174-1979
  • DIN 6773-2001 钢铁材料热处理.热处理件.图样画法及标注. (Heat treatment of ferrous metals - Heat treated parts, presentation and indications on drawings)
  • DIN 6799-1981
  • DIN 6888-1956 键连接.半圆键.尺寸和应用
  • DIN 6905-1990 SPRING WASHER FOR SCREW AND WASHER ASSEMBLIES
  • DIN 6908-1995 组合螺钉用锥形弹性垫圈 (Conical spring washers for screw and washer assemblies)
  • DIN 7080-2005
  • DIN 7081-1999
  • DIN 7167-1987
  • DIN 74-2003
  • DIN 7444-2008 棒形单头梅花扳手
  • DIN 7526-1969钢模锻件 尺寸公差
  • DIN 7540-1980 5级环钩
  • DIN 7601-1998 带球形衬套的压接接头
  • DIN 7603-2001
  • DIN 7603-2001密封垫圈标准 Ring srals and gaskets
  • DIN 7715-1-1977
  • DIN 7715-40-1998
  • DIN 7715-5-1979
  • DIN 7716-1982
  • DIN 7721-1-1989 ENG
  • DIN 7721-2-1989
  • DIN 7753-1-1988
  • DIN 82-1973 ENG
  • DIN EN ISO 10484-2004 螺母的扩孔试验
  • DIN EN ISO 10642-2004
  • DIN EN ISO 10644-1998 带平垫圈的螺钉和垫圈组件.垫圈硬度级别为200HV和300HV
  • DIN EN ISO 10673-1998 螺钉和垫圈组合件用平垫圈 小、标准和大系列 产品等级A级
  • DIN EN ISO 10683-2001 紧固件.非电解用锌片覆层
  • DIN EN ISO 11126-1-1997 涂装油漆和有关产品前钢材预处理　喷射清理用非金属磨料的技术要求第1部分：总体介绍和分类(包括技术勘误1 )
  • DIN EN ISO 11126-10-2005 涂料及有关产品使用前对钢底衬的制备.非金属喷沙清理磨料规范.第10部分石榴石
  • DIN EN ISO 11126-3-1997 涂装油漆和有关产品前钢材预处理　喷射清理用非金属磨料的技术要求第3部分：铜精炼渣
  • DIN EN ISO 11126-4-1998 涂装油漆和有关产品前钢材预处理　喷射清理用非金属磨料的技术要求第4部分：煤炉渣
  • DIN EN ISO 11126-5-1998 涂装油漆和有关产品前钢材预处理　喷射清理用非金属磨料的技术要求第5部分：镍精炼渣
  • DIN EN ISO 11126-6-1997 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 6 Iron furnace slag
  • DIN EN ISO 11126-7-1999 涂装油漆和有关产品前钢材预处理　喷射清理用非金属磨料的技术要求第7部分：熔融氧化铝
  • DIN EN ISO 11126-8-1997 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 8 Olivine sand
  • DIN EN ISO 11126-9-2005 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 9 Staurolite
  • DIN EN ISO 11290-1
  • DIN EN ISO 11885-1998 ENG
  • DIN EN ISO 12944-7-1998 ENG
  • DIN EN ISO 14501-2008 乳和乳粉 黄曲霉素M1含量的测量 免疫亲和层析净化高效液相色谱法
  • DIN EN ISO 1461-1999
  • DIN EN ISO 16584-2003 开口型盘头抽芯盲铆钉.NiCu-St或NiCu-SSt
  • DIN EN ISO 17070-2007 ENG
  • DIN EN ISO 17132-2008 Paints and varnishes - T-bend test (ISO 17132-2007); German version EN ISO 17132-2007
  • DIN EN ISO 1716-2002 建筑产品对火焰试验的反应.燃烧热的测定 (Reaction to fire tests for building products - Determination of the heat of combustion
  • DIN EN ISO 18265-2004 金属材料.硬度值的换算
  • DIN EN ISO 18279-2004 铜焊.铜焊接头的缺陷
  • DIN EN ISO 3167-1997 塑料--多用途试样
  • DIN EN ISO 3262-12-2002 涂料用填充剂 规范和测试方法 第12部分：白云母
  • DIN EN ISO 3262-22-2002 Extenders for paints - Specifications and methods of test - Part 22 Flux-calcined kieselguhr
  • DIN EN ISO 3549-2002 色漆用锌粉颜料.规范和试验方法
  • DIN EN ISO 3677-1995 软钎焊、铜焊和硬焊用填充金属.标识
  • DIN EN ISO 3887-2003 钢 脱碳层深度的测定
  • DIN EN ISO 4589-2-2006 塑料 以氧指数测定其易燃性 第2部分：环境-温度试验
  • DIN EN ISO 4762-2004 内六角圆柱头螺钉
  • DIN EN ISO 5817-2003 中文版 钢、镍、钛及其合金熔焊接头（不包括电子束焊接）缺陷的质量等级
  • DIN EN ISO 6270-2-2005
  • DIN EN ISO 6947-1997 Welds-Working positions Definitions of angles of slope and rotation
  • DIN EN ISO 7751-1997
  • DIN EN ISO 8256-2005 塑料 冲击拉伸强度测定
  • DIN EN ISO 8495-2004 金属材料管材环形扩口试验方法
  • DIN EN ISO 9227-2006
  • DIN IEC 60413-1980 ENG
  • DIN IEC 61906-2008 Procedure for the declaration of materials in products of the electrotechnical and electronic industry
  • DIN ISO 10447-1994 焊接.点焊.凸焊和有缝焊的剥离和凿剥离试验 Welding - Peel and chisel testing of resistance spot, projection and seam welds; identical with ISO 10447-1991
  • DIN ISO 10823-2001 中文版 滚子链传动选择指导
  • DIN ISO 11634-1997 ENG
  • DIN ISO 12128-1998 滑动轴承.润滑孔,润滑槽和润滑衬套.轴承套的尺寸,类型,标识以及应用
  • DIN ISO 13655-2000 制图技术.制图艺术成像用光谱测量和比色计算 Graphic technology - Spectral measurement and colorimetric computation for graphic arts images (ISO 136551996)
  • DIN ISO 13715-2000 ENG
  • DIN ISO 19499-2008 Mechanical vibration –Balancing –Guidance on the use and application of balancing standards
  • DIN ISO 22188-2008 Monitoring for inadvertent movement and illicit trafficking of radioactive material
  • DIN ISO 2768-1-1991
  • DIN ISO 4649-2006 ENG
  • DIN ISO 5755-2004-11金属烧结需求Sintermetalle Anforderungen（德文）
  • DIN ISO 6370-1-1995 Vitreous and porcelain enamels - Determination of the resistance to abrasion - Part 1 Abrasion testing apparatus
  • DIN ISO 6370-2-1995 釉瓷和搪瓷.耐磨性测定.第2部分表层耐磨后质量的损失
  • DIN ISO 7736-1985 道路车辆.前端安装的汽车无线电接收机.包括连接装置的装配空间
  • DIN ISO 8015-1986
  • DIN ISO12240-1-1999 关节轴承.第1部分径向关节轴承
  • DIN ISO12240-4-1999 关节轴承.第4部分径向关节轴承杆端
  • DIN ISO93-1-2001
  • DIN ISO93-2-2001
  • DIN V 19580-2003 车辆和人行区排水通道.抗风化、单位面积质量和第三方控制
  • DIN V VDE0832-300-2005
  • DIN V17006-100-1999 材料牌号表示方法
  • DIN VDE 0117-1991
  • DIN VDE 0281最新德国标准汇编(中文版)
  • DIN VDE 0620-1-2002 中文版 家用和类似用途的插头插座
  • DIN VDE0816-1-1988
  • DIN VDE0816-2-1988
  • DIN-5406-1993
  • DIN-8912-1990
  • DIN-EN-ISO-GB标准件对照表
  • DIN-EN14218-2003 六角法兰面螺母.细牙螺纹
  • DIN10955-2004
  • DIN17480-1992阀门材料 交货技术条件
  • DIN2448-81
  • DIN2458-81
  • DIN2505_V-1986
  • DIN2527Blind-Flanges
  • DIN2559-4-1994
  • DIN2559[1].3-1990
  • DIN2633-1998中
  • DIN2633
  • DIN2638
  • DIN2652-Loose Flange
  • DIN71752-1994
  • DIN71802-1992
  • DINV 53160-1-2002
  • DINV 53160-2-2002
  • DIN_2605-1_1991-02_e
  • DIN_2605-2_1995-06_e
  • DIN_2616-1_1991-02_e
  • DIN_2616-2_1991-02_e
  • DIN_28180-1985
  • DIN_EN_10253-1_English
  • DIN_EN_10253-2
  • DIN_EN_10253-3
  • DIN_EN_10253-4
  • DIN_VDE 0198-1999
  • DIN_VDE 0276 TEIL 620 1996
  • DIN_VDE 0293-1990
  • BS 4568-1970 中文版 电气装置用有ISO形式公制螺纹的导管和配件的技术条件
  • BS 4568-2-1970 电气装置用ISO型米制螺纹钢导管及配件规范.第2部分配件与零部件Specification for steel conduit and fittings with metric threads of ISO form for electrical installations. Fittings and components
  • BS 4569-1983 Method of test for Ignitability (surface flash) of pile fabrics and assemblies having pile on the surface
  • BS 4570-1985 Fusion welding of steel castings
  • BS 4573-1970 Specification for 2-pin reversible plugs and shaver socket-outlets
  • BS 4576-1-1989 未增塑聚氯乙烯(PVC-U)雨水管件和附件规范.半圆形天沟和圆截面管
  • BS 4577-1970 电阻焊电极和辅助设备用材料规范
  • BS 4584-102.13 Metal-clad base materials for printed circuits
  • BS 4584-103.2-1990 IEC 60249-3-3-1991 Metal-clad base materials for printed wiring boards
  • BS 4584-103.3-1992 IEC 60249-3A-1976 Metal-clad base materials for printed wiring boards
  • BS 4584-13-1977 Metal-clad base materials for printed circuits
  • BS 4584-15-1978 Metal-clad base materials for printed circuits
  • BS 4584-5-1972 Metal-clad base materials for printed circuits
  • BS 4584-6-1972 Metal-clad base materials for printed circuits
  • BS 4585-11-1983(ISO 5567-1982) Methods of test for spices and condiments. Determination of volatile organic sulphur compounds in dehydrated garlic
  • BS 4592-0-2006 Industrial type flooring and stair treads. Common design requirements and recommendations for installation
  • BS 4592-1-2006 Industrial type flooring and stair treads. Metal open bar gratings - Specification
  • BS 4592-4-2006 Industrial type flooring and stair treads. Glass reinforced plastics (GRP) open bar gratings. Specification
  • BS 4592-5-2006 Industrial type flooring and stair treads. Solid plates in metal and glass reinforced plastics (GRP) - Specification
  • BS 4604-1-1970 HSFG Bolts
  • BS 4604-2-1970 HSFG Bolts
  • BS 4607-1-1984 电气装置用非金属导管及接头规范 第1部分 绝缘材料接头和元件规范
  • BS 5345-6-1978 Code of practice for selection,installation and maintenance of electrical apparatus for use in potentially explosive atmospheres. Recommendations for type of protection
  • BS 5345-8-1980 Code of practice for selection,installation and maintenance of electrical apparatus for use in potentially explosive atmospheres
  • BS 6100-1.1-1987 Glossary of building and civil engineering terms. General and miscellaneous. Types of building
  • BS 6100-1.2-1992 Glossary of building and civil engineering terms. Spaces
  • BS 6100-1.3.0-1991 Glossary of building and civil engineering terms. General and miscellaneous. Parts of construction works. External works
  • BS 6100-1.3.6-1991 Glossary of building and civil engineering terms. General and miscellaneous. Parts of construction works. Jointing products, builders' hardware and accessories
  • BS 6100-1.5.1-1999 Glossary of building and civil engineering terms. General and miscellaneous. Operations. Associated plant and equipment. Co-ordination of dimensions. Tolerances and accuracy
  • BS 6100-1.5.2-1987 Glossary of building and civil engineering terms. General and miscellaneous. Operations. Associated plant and equipment. Jointing
  • BS 6100-1.6-1985 Glossary of building and civil engineering terms. General and miscellaneous. Persons
  • BS 6100-1.7.1-1986 Glossary of building and civil engineering terms. General and miscellaneous. Characteristics and performance. Performance
  • BS 6100-1.7.2-1989 Glossary of building and civil engineering terms. General and miscellaneous. Characteristics and performance. Characteristics
  • BS 6100-2-2007 Building and civil engineering – Vocabulary – Part 2 Spaces, building types, environment and physical planning
  • BS 6100-2-3-1992 建筑及土木工程术语词汇.第2部分土木工程.第3节下部结构.桥.大跨度结构
  • BS 6100-2.2.3-1990 Glossary of building and civil engineering terms. Tunnels
  • BS 6100-2.4.1-1992 Glossary of building and civil engineering terms. Highway engineering
  • BS 6100-2.4.2-1988 Glossary of building and civil engineering terms. Railway engineering
  • BS 6100-2.4.3-1992 Glossary of building and civil engineering terms. Airport engineering
  • BS 6100-2.5-1991 Glossary of building and civil engineering terms. Civil engineering. Hydraulic engineering and construction work
  • BS 6100-2.6-2005 Glossary of building and civil engineering terms. Civil engineering. Inland waters, coastal and maritime engineering
  • BS 6100-2.7-1992 Glossary of building and civil engineering terms. Civil engineering. Public health. Environmental engineering
  • BS 6100-3-2007 Building and civil engineering - Vocabulary. Civil engineering - General
  • BS 6100-4-2008 Building and civil engineering – Vocabulary – Part 4 Transport
  • BS 6100-4.4-1992 Glossary of building and civil engineering terms. Forest products. Carpentry and joinery
  • BS 6100-5-2009 Building and civil engineering – Vocabulary Part 5 Civil engineering – Water engineering, environmental engineering and pipelines
  • BS 6100-5.1-1992 Glossary of building and civil engineering terms. Masonry. Terms common to masonry
  • BS 6100-6-2008 Building and civil engineering – Vocabulary – Part 6 Construction parts
  • BS 6100-6.1-1984 Glossary of building and civil engineering terms. Concrete and plaster. Binders
  • BS 6100-6.5-1987 Glossary of building and civil engineering terms. Concrete and plaster. Formwork
  • BS 6100-7-2008 Building and civil engineering vocabulary. Services
  • BS 6100-9-2007 Building and civil engineering – Vocabulary – Part 9 Work with concrete and plaster
  • BS 6101-5-1992(ISO 3408-2-1991) Machine tool ball screws — Part 5 Specification for nominal diameters and nominal leads
  • BS 6102-1-1992 自行车.第1部分安全性要求规范
  • BS 6102-14-1991 自行车.第14部分有方头配件的底托架轴和曲柄组件尺寸规范
  • BS 6102-3-1986 Cycles
  • BS 6102-8-1990 自行车.第8部分自行车轴套上装配飞轮用的螺纹规范
  • BS 6104-1-1981 Mechanical Properties of Fasteners Part 1 Bolts, Screws and Studs - Discuz! Board
  • BS 6104-2-1983 Mechanical Properties of Fasteners Part 2 Nuts with Specified Proof Load Values - Discuz! Board
  • BS 6104-3-1981 Mechanical properties of fasteners. Part 3 Specification for set screws and similar threaded fasteners not under tensile
  • BS 6105-1981 3506-1979 specification for corrosion-resistant stainless steel fasteners
  • BS 6121-1-1989 Mechanical cable glands. Specification for metallic glands
  • BS 6121-5-1993 Mechanical cable glands. Code of practice for selection, installation and inspection
  • BS 6121.2-1989 Mechanical cable glands Part2 Specification for polymeric glands
  • BS 6150-1991 Code of practice for painting of buildings
  • BS 6161-18-1991 铝及铝合金阳极氧化镀层试验方法.第18部分表面耐磨性测定
  • BS 6166-3-1988 起重吊索.多用途起重吊索选择及安全指南
  • BS 6172-2004 Installation and maintenance of domestic gas cooking appliances (2nd and 3rd family gases) — Specification
  • BS 6180-1995 Code of practice for Barriers in and about buildings
  • BS 6187-2000 建筑物拆除实用规程
  • BS 6195-2006 Electric cables - rubber or silicone rubber insulated flexible cables and cords for coil end leads
  • BS 6200-1-1991 铁、钢和其他黑色金属的抽样与分析法.第1部分 前言和目录
  • BS 6231-2006 Electric cables. Single core PVC insulated flexible cables of rated voltage 6001000 V for switchgear and controlgear wiring
  • BS 6237-1982 Method for Grading and visual classification for muscovite mica splittings
  • BS 6258-1988 Specification for hollow steel bars for machining
  • BS 6262-1-2005 Glazing for buildings
  • BS 6262-1982 Code of practice for glazing for buildings
  • BS 6262-2-2005 Glazing for buildings
  • BS 6262-3-2005 Glazing for buildings
  • BS 6262-4-2005 Glazing for buildings
  • BS 6262-6-2005 Glazing for buildings
  • BS 6262-7-2005 Glazing for buildings
  • BS 6271-1982 Specification for miniature hacksaw blades
  • BS 6282-1-1982 —evices with moving parts for the prevention of contamination of water by backflow— Part 1 Specification for check valves of nominal size up to and including —N 54
  • BS 6290-4-1997 铅酸固定电池和电池组.阀门调节类型分类规范
  • BS 6293-1-1994 Aerospace. MJ threads. General requirements
  • BS 6293-2-1994 Aerospace. MJ threads. Limit dimensions for bolts and nuts
  • BS 6293-3-1994 Aerospace. MJ threads. Limit dimensions for fittings for fluid systems
  • BS 6297-2007 Code of practice for the design and installation of drainage fields for use in wastewater treatment
  • BS 6312-1-1994 Connectors for analogue telecommunication interfaces. Specification for plugs
  • BS 6312-1985 模拟电信接口联接器.插头规范
  • BS 6312-2.1-1994 Connectors for analogue telecommunication interfaces. Sockets for use with plugs specified in
  • BS 6312-2.2-1997 Connectors for analogue telecommunication interfaces. Sockets for use with plugs specified in
  • BS 6319-2-1983 Testing of resin compositions for use in construction — Part 2 Method for measurement of compressive strength
  • BS 6341-1983 Fabrics for camping tents
  • BS 6346-1997 Electric cables. PVC insulated, armoured cables for voltages of 6001000 V and 19003300 V
  • BS 6349-1-1984 Maritime Structures - General Criteria - Incorporates amendments
  • BS 6349-1-1991 中文版 海工建筑物--总则
  • BS 6349-1-2000 海上建筑物.通用标准的实施规程
  • BS 6349-2-1988 Maritime structures. design of quay walls, jetties and dolphins
  • BS 6349-3-1988 Maritime structures. design of dry docks, locks, slipways and shipbuilding berths, shiplifts and dock and lock gates
  • BS 6349-4-1994 中文版 海工建筑物--第4部分护舷和系泊装置的设计
  • BS 6349-4：1994 Maritime structures. Design of fendering and mooring systems
  • BS 6349-6：1989 Maritime structures. Design of inshore moorings and floating structures
  • BS 6349-8-2007 Maritime structures
  • BS 6349-8：2007 Maritime structures - Part 8： Code of practice for the design of Ro-Ro ramps, linkspans and walkways
  • BS 6360-1991 绝缘电缆的导体
  • BS 6362-1990 Specification for stainless steel tubes suitable for screwing in accordance with
  • BS 6363-1983 Specification for welded cold formed steel structural hollow sections
  • BS 6364-1984 阀门标准 Specification for Valves for cryogenic service
  • BS 6364-1998 中文版 低温阀门
  • BS 6374-2-1984 加工工业用聚合材料设备衬套.第2部分非热塑性塑料片制衬套规范
  • BS 6374-3-1984 加工工业用聚合材料设备衬套.第3部分烘干热固性树脂衬套规范
  • BS 6374-5-1985 加工工业用聚合材料设备衬套.第5部分橡胶制衬套规范
  • BS 6375-1-2004 门窗的性能.防风雨性的分类、选择指南和规范Performance of windows and doors - Classification for weathertightness and guidance on selection and specification
  • BS 6375-1-2009 Performance of windows and doors – Part 1 Classification for weathertightness and guidance on selection and specification
  • BS 6375-2-1987 Performance of windows - Specification for operation and strength characteristics
  • BS 6375-2-2009 Performance of windows and doors. Classification for operation and strength characteristics and guidance on selection and specification
  • BS 6387-1994 在着火状态下能保证电路工作的电缆的性能要求规范(英文)
  • BS 6396-2008 办公家具和教育用家具中的电气系统.规范
  • BS 6399-1-1996 Loading for buildings
  • BS 6399-2-1997 中文版 建筑荷载 第二部分 风荷载
  • BS 6399-3-1988 中文版 建筑荷载－第三部分-强制屋面荷载规范
  • BS 6400-3-2007 Specification for installation, exchange, relocation and removal of gas meters with a maximum capacity not exceeding 6 m3h – Part 3 Low and medium pressure (3rd family gases)
  • BS 6404-13-1996 Magnetic materials — Part 13 Methods of measurement of density, resistivity and stacking factor of electrical steel sheet and strip
  • BS 6405-1984 Specification for non-calibrated short link steel chain (grade 30) for general engineering purposes class 1 and 2
  • BS 6423-1983 电压达到和等于650V的电气开关设备和控制装置维修实用规程
  • BS 6431-1-1983 Ceramic floor and wall tiles part 1 Specification for classification and marking, including definitions and characteristics
  • BS 6431-15-1983 地面瓷砖和墙面瓷砖.第15部分线性热膨胀的测定方法
  • BS 6431-2-1984 地面瓷砖和墙面瓷砖.第2部分低吸水率的挤压成形瓷砖规范.A1类
  • BS 6431-3-3.1-1986 Ceramic floor and wall tiles part 3 Section 3.1
  • BS 6431-3-3.2-1986 Ceramic floor and wall tiles part 3 Section 3.2
  • BS 6431-4-4.1-1986
  • BS 6431-4-4.2-1986 Ceramic floor and wall tiles
  • BS 6435-1984 变压器与电抗线圈的高压电缆干燥端子用未充填护套规范
  • BS 6443-1984 Method for penetrant flaw detection. This Standard is part of the British Standards Online Service brought to you via IHS
  • BS 6446-1997 木材和木质板制品胶合构件的制作规范
  • BS 6453-1984 服装用皮革性能规范
  • BS 6463-1-1984 Quicklime. hydrated lime and natural calcium carbonate - Methods for physical testing
  • BS 6463-102-2001 生石灰、熟石灰与天然碳酸钙.化学分析方法
  • BS 6463-2-1984 Quicklime, hydrated lime and natural calcium carbonate. Methods of chemical analysis.
  • BS 6463-4-1987 Quicklime. hydrated lime and natural calcium carbonate. Methods of test for physical properties of hydrated lime and lime putty
  • BS 6464-1984 制炼厂用增强塑料管、配件和接头规范 Specification for reinforced plastics pipes, fittings and joints for process plants
  • BS 6465-1-1994 Sanitary installations. Code of practice for scale of provision, selection and installation of sanitary appliances
  • BS 6469 Sec 1.1-1992 Insulating and sheathing materials of electric cables. Methods of test for general application.
  • BS 6469 Sec 1.2-1992 Insulating and sheath- ing materials of elec- tric cables Part 1—. Methods of test for general application
  • BS 6469 Sec 1.3-1992 Insulating and sheath- ing materials of electric cables Part 1—. Methods of test for general application
  • BS 6469 Sec 1.4-1992 Insulating and sheathing materials of electric cables. Methods of test for general application. Tests at low temperature
  • BS 6469 Sec 2.1-1992 Insulating and sheathing materials of electric cables. Methods of test specific to PVC compounds
  • BS 6469 Sec 3.1-1992 Insulating and sheathing materials of electric cables. Methods of test specific to PVC compounds
  • BS 6469 Sec 3.2-1992 Insulating and sheathing materials of electric cables. Methods of test specific to PVC compounds. Loss of mass test
  • BS 6469 Sec 4.1-1992 Insulating and sheathing materials of electric cables. Methods of test specific to polyethylene and polypropylene
  • BS 6469 Sec 4.2-1992 Insulating and sheathing materials of electric
  • BS 6469 Sec 5.1-1992 Insulating and sheathing materials of electric
  • BS 6469 Sec 98.1-1996 Insulating and sheathing materials of electric cables
  • BS 6469 Sec 99.2-1992 电缆的绝缘和护套材料.第99部分用于英国的试验方法
  • BS 6469-99.1-1992 电缆的绝缘和护套材料.第99部分用于英国的试验方法,但不规定在BS 6469 Pt.1 至 Pt.5中.第1节非电子试验
  • BS 6472-1-2008 人体暴露于建筑物振动的评估指南.除爆破以外的振动源
  • BS 6472-1992 Guide to evaluation of human exposure to vibration in buildings (1 Hz to 80 Hz)
  • BS 6472-2-2008 Guide to evaluation of human exposure to vibration in buildings Part 2z Blast-induced vibration
  • BS 6485-1999 悬吊式动力线用聚氯乙烯覆盖导体
  • BS 6490-1984 Specification for shapes and dimensions (excluding thread dimensions) of plough bolt heads for earth-moving machinery
  • BS 6496-1984 Coverings and surface finishes; Surface finishes; Powder coatings; Materials; Metal sections other items; Aluminium
  • BS 6500-2000 Electric cables
  • BS 6501-1-2004 金属软管组件.波纹形软管组件的构造和使用指南Metal hose assemblies. Guidance on the construction and use of corrugated hose assemblies
  • BS 6501-2-1991 Flexible metallic hose assemblies. Specification for strip wound hoses and hose assemblies
  • BS 6510-1984 Specification for steel windows, sills, window boards and doors. Browse Product Family
  • BS 6527-1-1982(ISO 4572-1981) 液压传动-过滤器-测定过滤特性的多次通过法
  • BS 6558-1-1985 Optical fibres and cables. Specification for general requirements
  • BS 6564-3-1990 Polytetrafluoroethylene (PTFE) materials and products
    • [20130209标准免费下载] |　 1345    1 2 下一页 尾页

    返回标准资料网首页|www.PV265.com