NFPA 1600-2004 火灾对策实施规程
NFPA 1600-2007 火灾对策实施规程
NFPA 1620-1998 Recommended Practice for Pre-Incident Planning
NFPA 1670-1999 Operations and Training for Technical Rescue Incidents
NFPA 1720-2001 Standard on Volunteer Fire Service Deployment
NFPA 1851-2001 救火防护组装元件维护保养选择标准
NFPA 1852-2002 开路SCBA的选择、保养和维修标准
NFPA 1901-2003 机动式消防装置
NFPA 1906-2006 野外消防设备
NFPA 1911-2007 Standard for the Inspection, Maintenance,Testing, and Retirement of In-Service Automotive Fire Apparatus
NFPA 1912-2001 翻新救火装置
NFPA 1915-2000 Standard for Fire Apparatus Preventive Maintenance Program
NFPA 1925-1998 海上消防车辆
NFPA 1931-1999 Standard on Design of and Design Verification Test
NFPA 1931-2004 消防部门地面梯的设计及设计验证试验
NFPA 1932-1999 Standard on Use Maintenance and Service Testing
NFPA 1932-2004 消防部门地面梯的使用、维护和性能试验
NFPA 1936-1999 液压动力救火工具
NFPA 1951-2001 Standard on Protective Ensemble for USAR Operations
NFPA 1961-1997 Standard on Fire Hose
NFPA 1961-2007 Standard on Fire Hose-2007 Edition
NFPA 1962-2003 带联接件和喷嘴的消防软管保养和使用和试验
NFPA 1963-1998 Standard for Fire Hose Connections
NFPA 1963-2003 消防水龙带连接用螺纹和垫片
NFPA 1963-2009 Standard for Fire Hose Connections
NFPA 1964-1998 Standard for Spray Nozzles
NFPA 1965-2003 软管设备标准
NFPA 1971-2007 建筑物灭火防护标准
NFPA 1975-1999 紧急消防和救护服务部门工作服标准
NFPA 1976-2000 实地消防防护服
NFPA 1977-1998 Standard on Protective Clothing and Equipment for Wildland Fire Fighting
NFPA 1981-2007 Standard on Open-Circuit
NFPA 1982-1998 Personal Alert Safety Systems (PASS)
NFPA 1983-2001 Standard for Fire Service Life Safety Rope and System Components
NFPA 1983-2006 消防作业用安全绳索、安全带和五金件
NFPA 1991-2005 危险化学事故用蒸气防护套装
NFPA 1992-2000 Standard on Liquid Splash-Protective Ensembles and Clothing for Hazardous Materials Emergencies
NFPA 1994-2001 Protective Ensembles for Chemical, Biological Terrorism Incidents
NFPA 1999-1997 Standard on Protective Clothing for Emergency Medical Operations
NFPA 2001-2000 Standard on Clean Agent Fire Extinguishing Systems
NFPA 2001-2004 清洗剂灭火系统
NFPA 2001-2008 Standard for Clean Agent Fire Extinguishing Systems
NFPA 2010-2006 固定式气熔胶灭火系统
NFPA 2112-2001 Stardand on Flame-Resistant Garments for Protection of Industrial Personnel Against Flash Fire
NFPA 2112-2001
NFPA 5000-2006 建筑结构和安全规范
NFPA 5000-2006建筑结构和安全规范
NFPA 8501-1997 单燃烧嘴锅炉操作
NFPA 8502-1999 多燃烧器锅炉炉膛防内爆和外爆
NFPA 8503-1997 粉末燃料系统
NFPA 8504-1996 自然通风流化床锅炉操作
NFPA 8505-1998 加煤机操作
NFPA 8506-1995 热回收蒸汽发生器
NFPA FI1-1998 Fire Investigation Summary-Board and Care
NFPA FI2-1998 Fire Investigation Summary-Grain Elevator Explosion
NFPA FI3-1997 Fire Investigation Summary-Apartment Building Fire
NFPA FI4-1998 Fire Investigation Summary-Fire Fighter Fatalities
NFPA FI5-1998 Fire Investigation Summary-Fire Fighter Fatalities
NFPA FI6-1998 Fire Investigation Summary-Dance Hall Fire
NFPA FI7-1996 Fire Investigation Summary-Fraternity House Fire
NFPA FI8-1998 Fire Investigation Summary-Cruise Ship Fire
NFPA FI9-1999 Fire Investigation Summary-Residential Fire
NFPA Fire Protection Handbook, Vol 1 (2003, 9th edition)
IEEE Std 1013-2007 IEEE Recommended Practice for Sizing Lead-Acid Batteries for Stand-Alone Photovoltaic (PV)
IEEE Std 1015-2006 Cor 1-2007 IEEE Recommended Practice for Applying Low- Voltage Circuit Breakers Used in Industrial and
IEEE Std 1015-2006 IEEE Recommended Practice for Applying Low-Voltage Circuit Breakers Used in Industrial and
IEEE Std 1016-1998 IEEE Recommended Practice for Software Design DEscriptions
IEEE Std 1016-2009 IEEE Standard for Information Technology—Systems Design— Software Design Descriptions
IEEE Std 1017-2004 IEEE Recommended Practice for Field Testing Electric Submersible Pump Cable
IEEE Std 1018-1985 IEEE recommended practice for specifying electric submersible pump cable-ethylene-propylene rubber insulation
IEEE std 1018-1991 recommended practice for specifying electric submersible pump cable-ethylene-propylene rubber insulation
IEEE Std 1018-2004 IEEE Recommended Practice for Specifying Electric Submersible Pump Cable—Ethylene-Propylene Rubber Insulation
IEEE Std 1019-1985 IEEE Recommended Practice for Specifying Electric Submersible Pump Cable- Polypropylene Insulation
IEEE Std 1019-2004 IEEE Recommended Practice for Specifying Electric Submersible Pump Cable—Polypropylene Insulation
IEEE Std 1023-2004 IEEE Recommended Practice for the Application of Human Factors Engineering to Systems, Equipment, and Facilities of Nuclear
IEEE Std 1028-2008 IEEE Standard for Software Reviews and Audits
IEEE Std 1031-2000 IEEE Guide for the Functional Specification of Transmission Static Var Compensators
IEEE Std 1044-1993 IEEE Standard Classification for Software Anomalies
IEEE Std 1044.1-1995 IEEE Standard Classification for Software Anomalies
IEEE Std 1045-1992 IEEE Standard for Software Productivity Metrics
IEEE Std 1048-2003 IEEE Guide for Protective Grounding of Power Lines
IEEE Std 1050-2004 IEEE Guide for Instrumentation and Control Equipment Grounding in Generating Stations2005
IEEE Std 1058-1998 IEEE Standard for Software Project Management Plans
IEEE Std 1074-1997 IEEE Standard for Developing Software Life Cycle Processes
IEEE Std 1074-2006 IEEE Standard for Developing a Software Project Life Cycle Process
IEEE Std 1076-2002 IEEE Standard VHDL Language Reference Manual
IEEE std 1076-2008 IEEE Standard VHDL Language Reference Manual
IEEE Std 1076.1-1999 IEEE Standard VHDL Analog and Mixed-Signal Extensions
IEEE Std 1076.1-2007 IEEE Standard VHDL Analog and Mixed-Signal Extensions
IEEE Std 1076c-2007 IEEE Standard VHDL Language Reference Manual Amendment 1 Procedural Language Application Interface
IEEE Std 1082-1997 IEEE guide for incorporating human action reliability analysis for nuclear power generating stations
IEEE Std 1094-1991 建议之风力发电站的电机设计与运转规范
IEEE Std 1100-1999 IEEE recommended practice for powering and grounding electronic equipment
IEEE Std 1101.2-1992 IEEE Standard for Mechanical Core Specifications for Conduction-Cooled Eurocards
IEEE Std 1101.4-1993 IEEE Standard for Military Module, Format E Form Factor
IEEE Std 1101.7-1995 IEEE Standaird for Space Applications Module, Extended Height Format E Form Factor
IEEE Std 1106-2005 IEEE Recommended Practice for Installation
IEEE Std 1110-2002 IEEE Guide for Synchronous Generator Modeling Practices and Application
IEEE Std 1115-2000 IEEE Recommended Practice for Sizing Nickel-Cadmium Batteries for Stationary Applications
IEEE Std 1115a-2007 IEEE Recommended Practice for Sizing Nickel-Cadmium Batteries for Stationary Applications
IEEE Std 1120-2004 IEEE Guide for the Planning, Design, Installation, and Repair of Submarine Power Cable Systems
IEEE Std 1125-1993 IEEE Guide for Moisture Measurement and Control in SF6 Gas-Insulated Equipment
IEEE Std 1138-1994 IEEE Standard Construction of Composite Fiber Optic Overhead Ground Wire (OPGW) for Use on Electric Utility Power Lines
IEEE Std 1138-1994 中文版 光纤复合架空地线
IEEE Std 1139-1988 IEEE Standard Definitions of Physical Quantities for Fundamental Frequency and Time Metrology
IEEE Std 1139-2008 IEEE Standard Definitions of Physical Quantities for Fundamental Frequency and Time Metrology—Random Instabilities
IEEE Std 1143-1994 IEEE Guide on Shielding Practice for Low Voltage Cables
IEEE Std 1147-2005 IEEE Guide for the Rehabilitation of Hydroelectric Power Plants
IEEE Std 1149.1-2001 test access port and boundary-scan architecture
IEEE Std 1159-2009 IEEE Recommended Practice for Monitoring Electric Power Quality
IEEE Std 1159.3-2003 IEEE Recommended Practice for the Transfer of Power Quality Data
IEEE Std 1175.4-2008 IEEE Standard for CASE Tool Interconnections—Reference Model for Specifying System Behavior
IEEE Std 1184-1994 IEEE Guide for the Selection and Sizing of Batteries for Uninterruptible Power Systems
IEEE Std 1184-2006 IEEE Guide for Batteries for Uninterruptible Power Supply Systems
IEEE Std 1185-1994 IEEE guide for installation methods for generating station cables
IEEE Std 1186-1996 阀控铅酸蓄电池维护、测试和更换
IEEE Std 1188-1996 IEEE 推荐用于站用阀控铅酸(VRLA)蓄电池的
IEEE Std 1189-2007 IEEE Guide for Selection of Valve-Regulated Lead-Acid (VRLA) Batteries for Stationary Applications
IEEE Std 1202-1991 IEEE Standard for Flame Testing of Cables for Use in Cable Tray in Industrial and Commercial Occupancies
IEEE Std 1202-2006 Flame-Propagation Testing of Wire and Cable
IEEE Std 1208-1997 Standard for Software Reviews IEEE Std Computer Society Document
IEEE Std 1210-1996 IEEE Standard Tests for Determining Compatibility of Cable-Pulling Lubricants With Wire and Cable
IEEE Std 1210-2004 IEEE Standard Tests for Determining Compatibility of Cable-Pulling Lubricants With Wire and Cable
IEEE Std 1212-2001 IEEE Standard for a Control and Status Registers (CSR) Architecture for Microcomputer Buses
IEEE Std 1226-1998 测试的宽底环境试行标准.总论和建筑学
IEEE Std 1226.3-1998 试验用以全环境为基础的资源管理用软件接口
IEEE Std 1226.6-1996 赫克TM测试用宽底环境标准的协议导则
IEEE Std 1234-2007 IEEE Guide for Fault Locating Techniques on Shielded Power Cable Systems
IEEE Std 1241-2000 IEEE Standard for Terminology and Test Methods for Analog-to-Digital Converters
IEEE Std 1243-1997 IEEE Guide for Improving the Lightning Performance of Transmission Lines
IEEE Std 1246-2002 IEEE Guide for Temporary Protective Grounding Systems Used in Substations
IEEE Std 1247-2006 IEEE Standard for Interrupter Switches for Alternating Current, Rated Above 1000 V
IEEE Std 1248-1998 IEEE Guide for the Commissioning of Electrical Systems in Hydroelectric Power Plants
IEEE Std 1249-1996 IEEE Guide for Computer-Based Control for Hydroelectric Power Plant Automation
IEEE Std 1250-1995 IEEE Guide for Service to Equipment Sensitive to Momentary Voltage Disturbances
IEEE Std 1262-1995 IEEE Recommended Practice for Qualification of Photovoltaic (PV) Modules -Description
IEEE Std 1277-2000 Gerneral Requirements and Test Code for Dry-Type and Oil-Immersed Smoothing Reactors for DC Power Transmission
IEEE Std 1283-2004
IEEE Std 1284-1994 用于个人计算机的双向平行外围接口的信号方法
IEEE Std 1302-2008 IEEE Guide for the Electromagnetic Characterization of Conductive Gaskets in the Frequency Range of DC to 18 GHz
IEEE Std 1313.1-1996 Standard for Insulation Coordination - Definitions, Principles, and Rules
IEEE Std 1313.2-1999 IEEE guide for the application of insulation coordination
IEEE Std 1344-1995(R2001) IEEE Standard for Synchrophasors for Power Systems.1995
IEEE Std 1349-2001 IEEE Guide for the Application of Electric Motors in Class I, Division 2 Hazardous (Classified) Locations
IEEE Std 1363.1-2008 IEEE Standard Specification for Public Key Cryptographic Techniques Based on Hard Problems over Lattices
IEEE Std 1363.2-2008 IEEE Standard Specifications for Password-Based Public-Key Cryptographic Techniques
IEEE Std 1366-2001 IEEE Guide for Electric Power Distribution Reliability Indices
IEEE Std 1366-2003 IEEE Guide for Electric Power Distribution Reliability Indices
IEEE Std 1368-2006 IEEE Guide for Aeolian Vibration Field Measurements of Overhead Conductors
IEEE Std 1374-1998 IEEE Guide for Terrestrial Photovoltaic Power System Safety
IEEE Std 1386.1-2001 IEEE Standard Physical and Environmental Layers for PCI Mezzanine Cards (PMC)
IEEE Std 1394-1998 P1394a Draft Standard for a High Performance Serial Bus
IEEE Std 1394-2008 IEEE Standard for a High-Performance Serial Bus
IEEE Std 1394.1-2004 IEEE Standard for High Performance Serial Bus Bridges
IEEE Std 1394.3-2003 IEEE Standard for a High Performance Serial Bus Peer-to-Peer Data Transport Protocol (PPDT)
IEEE Std 1394a-2000 IEEE Standard for a High Performance Serial Bus—Amendment 1
IEEE Std 1394a-2002 IEEE Standard for a High Performance Serial Bus—Amendment 1
IEEE Std 384-2008 IEEE Standard Criteria for Independence of Class 1E Equipment and Circuits
AS-NZS 3112-2004 Amd 1-2006 Approval and test specification—Plugs and socket-outlets
AS-NZS 3112-2004 澳规插头的安规及测试方法
AS-NZS 3117-2007 Approval and test specification— Bayonet lampholders
AS-NZS 3120-1999 Approval and test specification- Cord extension sockets
AS-NZS 3133-2009 Approval and test specification— Air-break switches
AS-NZS 3160-2001 Amdt 1-2005 Approval and Test Specification-Handheld Portable Electric Tools
AS-NZS 3160-2001 Amdt 2-2006 Approval and Test Specification-Handheld Portable Electric Tools
AS-NZS 3160-2001 Approval and Test Specification-Handheld Portable Electric Tools
AS-NZS 3160-2009 Approval and test specification—Handheld portable electric tools
AS-NZS 3190-2009 Approval and test specification— Residual current devices (currentoperated earth-leakage devices)
AS-NZS 3191-2008 Electric flexible cords
AS-NZS 3197-2005 Approval and test specification— Portable electrical control or conditioning devices
AS-NZS 3200.2.38-2007 Medical electrical equipment - Particular requirements for safety - Electrically and ma
AS-NZS 3350.1-2002 Safety of household and similar electrical appliances - General requirements
AS-NZS 3350.2.30 A2-2001 Safety of household and similar electrical appliances Part 2.30 Particular requirements – Room heaters
AS-NZS 3350.2.30 A3-2001 Safety of household and similar electrical appliances Part 2.30 Particular requirements – Room heaters
AS-NZS 3439.3-2002 Low-voltage switchgear and controlgear assemblies Part 3 Particular requirements for lowvoltage switchgear and controlgear
AS-NZS 3439.4-2009 Low-voltage switchgear and controlgear assemblies Part 4 Particular requirements for assemblies for construction sites (ACS)
AS-NZS 3439.5-2009 Low-voltage switchgear and controlgear assemblies Part 5 Particular requirements for assemblies for power distribution in public networks
AS-NZS 3499-1997 Flexible tube connectors for water supply
AS-NZS 3499-2006 Water supply - Flexible hose assemblies
AS-NZS 3500.0-2003 Plumbing and drainage - Glossary of terms
AS-NZS 3500.1-2003 Plumbing and drainage - Water services
AS-NZS 3500.2-2003 Plumbing and drainage - Sanitary plumbing and drainage
AS-NZS 3500.3-2003 Plumbing and drainage - Stormwater drainage
AS-NZS 3500.4-2003 Plumbing and drainage - Heated water services
AS-NZS 3500.5-2000 Plumbing and Drainage - Domestic installations
AS-NZS 3509-2009 LP Gas fuel vessels for automotive use
AS-NZS 3560.1-2000 ELECTRICAL INSTALLATIONS -TESTING AND INSPECTION GUIDELINES
AS-NZS 3576-1998 Clearing saws, brushcutters and grass trimmers-Guide to safe working practices
AS-NZS 3580.2.2-2009 Methods for sampling and analysis of ambient air Method 2.2 Preparation of reference test atmospheres—Compressed gas method
AS-NZS 3580.9.7-2009 Methods for sampling and analysis of ambient air Method 9.7 Determination of suspended particulate matter—Dichotomous sampler
AS-NZS 3599.1-2003 Electric cables—Aerial bundled— Polymeric insulated—Voltages 6.3511 (12) kV and 12.722 (24) kV Part 1 Metallic screened
AS-NZS 3599.2-1999 Electric cables—Aerial bundled— Polymeric insulated—Voltages 6.3511(12) kV and 12.722(24) kV Part 2 Non-metallic screened
AS-NZS 3662-2009 Performance of showers for bathing
AS-NZS 3666.1-2002 Air-handling and water systems of buildings - Microbial control - Design, installation and
AS-NZS 3666.2-2002 Air-handling and water systems of buildings - Microbial control - Operation and maintenanc
AS-NZS 3666.3-2000 Air-handling and water systems of buildings - Microbial control - Performance-based maintenance of cooli
AS-NZS 3678-1996 Structural steel - Hot-rolled plates, floorplates and slabs
AS-NZS 3690-2009 Installation of ABS pipe systems
AS-NZS 3696.19-2009 Wheelchairs Part 19 Wheeled mobility devices for use as seats in motor vehicles (ISO 7176-192008, MOD)
AS-NZS 3707-2001 Method for testing pressure cycling resistance of pipes and fittings
AS-NZS 3718-2005 Water supply - Tap ware
AS-NZS 3750.0-2008 Paints for steel structures Part 0 Introduction and list of Standards
AS-NZS 3750.1-2008 Paints for steel structures Part 1 Epoxy mastic (two-pack)—For rusted steel
AS-NZS 3750.11-2009 Paints for steel structures Part 11 Chlorinated rubber—High-build and gloss
AS-NZS 3750.13-1997 Paints for steel structures Part 13 Epoxy primer (two-pack)
AS-NZS 3750.19-2008 Paints for steel structures Part 19 Metal primer—General purpose
AS-NZS 3750.2-2008 Paints for steel structures Part 2 Ultra high-build paint
AS-NZS 3750.20-2008 Paints for steel structures Part 20 Anticorrosive metal primer— Solvent-borne—Lead and chromate free
AS-NZS 3750.21-2008 Paints for steel structures Part 21 Undercoat—Solvent-borne
AS-NZS 3750.22-2008 Paints for steel structures Part 22 Full gloss enamel—Solventborne
AS-NZS 3750.23-2008 Paints for steel structures Part 23 Semi-gloss enamel—Solventborne
AS-NZS 3750.3-2008 Paints for steel structures Part 3 Heat resisting—Exterior
AS-NZS 3750.5-2008 Paints for steel structures Part 5 Acrylic full gloss (two-pack)
AS-NZS 3750.6-2009 Paints for steel structures Part 6 Full gloss polyurethane (twopack)
AS-NZS 3750.7-2009 Paints for steel structures Part 7 Aluminium paint
AS-NZS 3750.9-2009 Paints for steel structures Part 9 Organic zinc-rich primer
AS-NZS 3788-2006 Pressure equipment - In-service inspection
AS-NZS 3820-1998 Amdt 1-2004 Essential safety requirements for low voltage electrical equipment
AS-NZS 3820-2009 Essential safety requirements for electrical equipment
AS-NZS 3823.1.1-1998 Air Conditioner Cooling Capacity Test
AS-NZS 3823.2-2005 Amdt 3-2008 Performance of electrical appliances—Airconditioners and heat pumps Part 2 Energy labelling and minimum energy
AS-NZS 3837-1998 使用氧消耗热量计测量材料和产品的热量与烟排放率的方法
AS-NZS 3845-1999 Road safety barrier systems
AS-NZS 3863-2002 Galvanized mild steel wire for armouring of cables
AS-NZS 3931-1998 Risk analysis of technological systems—Application guide
AS-NZS 3973-2009 Showertoilet chairs (mobile and static)
AS-NZS 3992-1998 Pressure equipment—Welding and brazing qualification
AS-NZS 4026-2001 Electric cables—For underground residential distribution systems
AS-NZS 4087-2004 Metallic flanges for waterworks purpoees
AS-NZS 4130-2009 Polyethylene (PE) pipes for pressure applications
AS-NZS 4158-2003 A1 Thermal-bonded polymeric coatings on valves and fittings for water industry purposes
AS-NZS 4158-2003 Amdt 1 2005 Thermal-bonded polymeric coatings on valves and fittings for water industry purposes
AS-NZS 4220-2010 Bunk beds and other elevated beds
AS-NZS 4240.1-2009 Remote control systems for mining equipment Part 1 Design, construction, testing,
AS-NZS 4240.2-2009 Remote control systems for mining equipment - Part 2 Operation and maintenance for underground metalliferous mining
BS 4607-1-1984 A2-2010 电气装置用非金属导管及配件规范.绝缘材料配件和组件规范
BS 4607-2-1970 电气装置用非金属导管及配件规范 硬聚氯乙烯导管和配件
BS 4607-3-1971 电气装置用非金属导管及配件规范 自熄性塑料制普通和增强的可弯波纹导管
BS 4607-5-1982 A3-2010 电气装置用非金属导管及配件规范.绝缘材料刚性导管、配件和盒子规范
BS 4620-1970 Specification for rivets for general engineering purposes
BS 4622-1970 灰口铁管和管接头规范
BS 4652-1995 Specification for zinc-rich priming paint (organic media)
BS 4660-2000 Thermoplastics ancillary fittings of nominal sizes 110 and 160 for below ground gravity drainage and sewerage
BS 4662-1970 Specification for boxes for the enclosure of electrical accessories
BS 4662-2006 A1-2009 电气附件嵌入装置用箱.要求、试验方法和尺寸
BS 4677-1984 Specification for arc welding of austenitic stainless steel pipework for carrying fluids
BS 4678-1-1971 电缆管道.钢制表面管道规范
BS 4678-4-1982 Cable Trucking
BS 4682-2-1988 Dimensional stability of textile floor coverings
BS 4682-3-1981 Dimensional stability of texitile floor coverings Part3.Determination of dimensional changes after exposure to heat
BS 4682-4-1981 Dimensional stability of texitile floor coverings Part4.Determination of dimensional changes after immersion in water
BS 4718-1971 Methods of test for silencers for air distribution systems
BS 4721-1981 预搅拌建筑灰浆规范
BS 4737-3.30-1986 Intruder alarm systems in buildings
BS 4756-1998 Specification for ready-mixed aluminium priming paints for woodwork
BS 4772-1988 Specification for ductile iron pipes and fittings
BS 4790-1987 小火源对铺地织物的影响的测定方法(热金属螺母法)
BS 4800-1989 Paint colours for building purposes
BS 4808-1-1972 L.F. cables and wires with PVC insulation and PVC sheath for telecommunication
BS 4825-3-1991 A2-2009 食品工业及其他卫生设施用不锈钢管及配件.夹紧型连接件规范
BS 4825-4-1991 Stainless steel tubes and fittings for the food industry and other hygienic applications. Specification for threaded (IDF type) coupling
BS 4825-4-1991 A1-2009 食品工业及其他卫生设施用不锈钢管及接头.螺纹(IDF型)管接头规范
BS 4825-5-1991 A1-2009 食品工业及其他卫生设施用不锈钢管及配件.夹紧型连接件规范
BS 4833-1986 Schedule for hygrometric tables for use in the testing and operation of environmental enclosures
BS 4840-2-1994 硬聚氨基(PUR)泡沫塑料块.第2部分冷藏箱、冷藏室及冷库用聚氨脂泡沫塑料规范
BS 4848-2-1991 Hot-rolled structural steel sections. Specification for hot-finished hollow sections
BS 4848-4-1972 Specification for hot-rolled structural steel sections. Equal and unequal angles
BS 4848-5-1980 Hot-rolled structural steel sections. Bulb flats
BS 4865-1-1989 Dimensions of gaskets for flanges to BS 4504 part 1 Specification for non-metallic flat gaskets
BS 4868-1972 Specification for profiled aluminium sheet for building
BS 4870-1-1981 Approval testing of welders working to approved welding procedures- Fusion welding of steel
BS 4871-1-1982按认可焊接工艺操作的焊工鉴定考试规范.第一部分金属溶接焊
BS 4871-2-1982 Approval testing of welders working to approved welding procedures Part 2. TIG or MIG welding of alumonium and its alloys
BS 4871-3-1985 按认可焊接工艺操作的焊工鉴定考试规范.第3部分金属管与管板接头间电弧焊
BS 4872-2-1976 Specification for approval testing of welders when welding procedure approval is not required - TIG or MIG welding of aluminium and its alloys
BS 4873-1986 Specification for aluminium alloy windows
BS 4873-2009 Aluminium alloy windows and doorsets. Specification
BS 4875-5-2001 家具的强度和稳定性.家用和定做用桌子及小台车的强度、耐用性和稳定性要求
BS 4875-5-2009 家用桌子强度测试疲劳测试稳定性测试
BS 4875-7-2006 Strength and stability of furniture
BS 4875-8-1998 家具稳定性和强度.非家用储存家具耐力和强度的测定方法
BS 4875.1-2001,Strength and stability of furniture
BS 4875.3-1985 strength and stability of furniture
BS 4875.6-1985 Methods for deternination of stability of tables and trolleys
BS 4921-1988 钢铁件上的镀锌层规范
BS 4929-1-1973 Specification for steel hexagon prevailing-torque type nuts. Metric series
BS 4929-2-1973 常扭矩式钢质六角螺母规范.第2部分统一英制系列
BS 4933-1973 Specification for ISO metric black cup and countersunk head bolts and screws with hexagon nuts
BS 4935-1989 Method of specifying acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials - Discuz! Board
BS 4939-1987 Determination of thickness loss of textile floor coverings after prolonged heavy static loading
BS 4942-1-1981 short link chain for lifting purposes Part 1 Specification for general conditions of acceptance
BS 4942-2-1981 Short link chain for lifting purposes. Specification for grade M (4) non-calibrated chain
BS 4942-3-1981 Short link chain for lifting purposes. Specification for grade M (4) calibrated chain
BS 4942-4-1981 Short link chain for lifting purposes. Specification for grade S (6) non-calibrated chain.
BS 4942-5-1981 Short link chain for lifting purposes. Specification for grade S (6) non-calibrated chain
BS 4942-6-1981 Short link chain for lifting purposes. Specification for grade T (8) calibrated chain
BS 4952-1992 弹性织物的试验方法Methods of test for elastic fabrics
BS 4960-1986 家庭烹调用衡器规范
BS 4962-1989 田间地下排水用塑料管和配件规范
BS 4978-1996 Specification forn Visual strength grading of softwood
BS 4978-2007 Visual strength grading of softwood - Specification
BS 4983-1992 织物加固的热塑性塑料液压软管和软管组件规范
BS 4987-1-2001 Coated macadam (asphalt concrete) for roads and other paved areas — Part 1 Specification for constituent materials and for mixtures
BS 4987-2-2001 道路及其它铺砌区用黑色碎石路面.运输,铺设和压实规范
BS 4994-1987 Specification for design and construction of vessels and tanks in reinforced plastics
BS 4999-0-1987 旋转电机一般要求.第0部分总则和其他部分介绍
BS 4999-101-1987 General Requirements for Rotating Electrical Machines- Rating and Performance
BS 4999-102-1987 General Requirements for Rotating Electrical Machines- Methods for Determining Losses and Efficiency from Tests (Excluding
BS 4999-104-1988 Generl Requirements for Rotating Electrical Machines- Methods of Test for Determining Synchronous Machine Quantities
BS 4999-105-1988 General Requirements for Rotating Electrical Machines- Classification of Degrees of Protection Provided by Enclosures for
BS 4999-106-1987 General Requirements for Rotating Electrical Machines- Classification of Methods of Cooling
BS 4999-107-1987 General Requirements for Rotating Electrical Machines- Symbols for Types of Construction and Mounting Arrangements
BS 4999-108-1987 General requirements for rotating electrical machines. Specification for terminal markings and direction of rotation
BS 4999-109-1987 General requirements for rotating electrical machines. Specification for noise levels, including test methods
BS 4999-111-1987 General requirements for rotating electrical machines. Specification for built-in thermal protection for electric motors
BS 4999-112-1987 General Requirements for Rotating Electrical Machines- Starting Performance of Single- Speed Three-Phase Cage Induction
BS 4999-115-1992 General requirements for rotating electrical machines. Impulse voltage withstand levels of rotating A.C. machines with
BS 4999-116.1-1992 Rotating Electrical Machines- Excitation Systems for Synchronous Machines
BS 4999-140-1987 旋转电机的一般要求.第140部分交流同步发电机的电压调节和并联运行规范
BS 4999-141-1987 General requirements for rotating electrical machines. Specification for standard dimensions. This Standard is part of the British
BS 4999-142-1987 旋转电机一般要求.第142部分机械性能规范.振动
BS 4999-143-1987 General requirements for rotating electrical machines. Specification for tests
BS 4999-144-1987 General requirements for rotating electrical machines. Specification for the insulation of bars and coils of high voltage machines
BS 4999-145-1987 旋转电机一般要求.第145部分绕组出线端规范
BS 4999-146-1988 General Requirements for Rotating Electrical Machines- Definitions and Nomenclature for Carbon Brushes, Brush- Holders
BS 4999-147-1988 General requirements for rotating electrical machines — Part 147 Specification for dimensions of brushes and brush-holders for
BS 5041-1-1987 消防栓系统设备.第1部分湿式水嘴接地阀规范
BS 5041-2-1987 Fire hydrant systems equipment. Specification for landing valves for dry risers.
BS 5041-3-1975 Fire hydrant systems equipment — Part 3 Specification for Inlet breechings for dry riser inlets
BS 5042-1987 Specification for bayonet lampholders. This Standard is part of the British Standards Online Service brought to you via IHS
BS 5045-2-1989 Transportable gas containers. Specification for steel containers of 0.5 L up to 450 L water capacity with welded seams
BS 5045-5-1986 可运输的气体容器.第5部分大于0.5L至130L水容量的焊接铝合金气体容器规范
BS 5045-7-2000 可运输的气体容器.特殊便携的水容量为0.5-15升的无缝钢气体容器的规范
BS 5057-1992 Specification for Flat, quick-connect terminations
BS 5073-1982 货物在运输集装箱中的贮存指南
BS 5075-1-1982 Concrete admixtures part 1. Specification for accelerating admixtures, retarding admixtures and water reducing admixtures ...
BS 5075-3-1985 Concrete admixtures Part 2. Specification for superplasticizing admixtures
BS 5080-2-1986 混凝土和砖石工程中结构附件的试验方法.抗剪荷载的测定方法
BS 5099-2004 Electric cables – Voltage levels for spark testing
BS 5131-0-1990 鞋靴和鞋靴材料试验方法.第0部分总则
BS 5131-1.1-1991 鞋靴和鞋靴材料试验方法.第1部分粘合剂.第1节粘缝耐热性(蠕变试验)
BS 5131-1.2-1991 鞋靴和鞋靴材料试验方法.第1部分粘合剂.第2节粘合缝耐剥离试验
BS 5131-1.3-1991 鞋靴和鞋靴材料试验方法.第1部分粘合剂.第3节粘合剂(不包括热熔粘合剂)耐热性(蠕变)和剥离试验试样制备
BS 5131-1.4-1979 鞋靴和鞋靴材料试验方法.粘合剂.对粘合剂(热熔粘合剂除外)进行耐热性(蠕变)和剥离试验时试样的制备
BS 5131-1.6-1979 鞋靴和鞋靴材料试验方法.第1部分粘合剂.第 6节对胶粘结合进行耐热性或耐剥离性试验前的推荐环境储存条件
BS 5131-1.7-1991 鞋靴和鞋靴材料试验方法.第1部分粘合剂.第7节耐热性(蠕变)和耐剥离试验用热熔胶粘剂试验组件制备
BS 5131-1.8-1981 鞋靴和鞋靴材料试验方法.第1部分胶粘剂.第8节耐久热熔胶粘剂抗剪结合强度发育速度
BS 5131-1.9-1985 鞋靴和鞋靴材料试验方法.第1部分胶粘剂.第9节原始胶粘结合强度测量
BS 5131-2.1-1991 鞋靴和鞋靴材料试验方法.第2部分鞋底.第1节鞋底材料抗切口延伸试验用罗斯氏屈挠法
BS 5131-2.10-1991 鞋靴和鞋靴材料试验方法.第2部分鞋底.第10节多孔材料鞋底热收缩的测量
BS 5131-2.11-1983 鞋靴和鞋靴材料试验方法.第2部分鞋底.第11节鞋底与热表面短时接触的耐热性
BS 5131-2.6-1979 鞋靴和鞋靴材料试验方法.鞋底.泡沫鞋底粒面层和网状层间的撕裂强度
BS 5131-2.7-1980 鞋靴和鞋靴材料试验方法.第2部分鞋底.第7节鞋底材料物理试验试样制备
BS 5131-3.1-1991 鞋靴和鞋靴材料试验方法.第3部分鞋帮、织物和缝线.第1节垂直于针脚孔的鞋衬鞋帮材料强度
BS 5131-3.4-1978 鞋靴和鞋靴材料试验方法.第3部分鞋帮、织物和缝线.第 4节垂直于针脚孔的鞋帮材料强度
BS 5131-3.5-1978 鞋靴和鞋靴材料试验方法.第3部分鞋帮、织物和缝线.第 5节断裂中空试验
BS 5131-3.6-1991 鞋靴和鞋靴材料试验方法.第3部分鞋帮、织物和缝线.第6节鞋带耐磨性
BS 5131-3.7-1991 鞋靴和鞋靴材料试验方法.第3部分鞋帮、织物和缝线.第7节鞋带断裂强度
BS 5131-4.1-1975 鞋靴和鞋靴材料试验方法.第4部分其他部件.第1节内底纸板耐脱落性
BS 5131-4.12-1990 鞋靴和鞋靴材料试验方法.第4部分其他部件.第12节纤维板成品在水和汗中的耐摩擦牢度
BS 5131-4.13-1976 鞋靴和鞋靴材料试验方法.第4部分其他部件.第13节纤维纸板内底的横向抗拉强度
BS 5131-4.18-1985 鞋靴和鞋靴材料试验方法.第4部分其他部件.第18节钢勾心的纵向刚性
BS 5131-4.2-1990 鞋靴和鞋靴材料试验方法.第4部分其它部件.第2节纤维板弯曲指数
BS 5131-4.20-1985 鞋靴和鞋靴材料试验方法.第4部分其他部件.第20节鞋跟钉拔出力
BS 5131-4.3-1990 鞋靴和鞋靴材料试验方法.第4部分其他部件.第3节纤维板的耐缝线撕裂性
BS 5131-4.4-1990 鞋靴和鞋靴材料试验方法.其它部件.纤维板的鞋跟销钉支撑强度
BS 5131-4.5-1990 鞋靴和鞋靴材料试验方法.第4部分其他部件.第5节纤维纸板拉伸强度
BS 5131-4.6-1975 鞋靴和鞋靴材料试验方法.第4部分其他部件.第 6节内底粘附肋条抗剪强度
BS 5131-4.7-1975 鞋靴和鞋靴材料试验方法.第4部分其他部件.第7肋节内底粘附肋条的耐脱落性
BS 5131-4.8-1990 鞋靴和鞋靴材料试验方法.第4部分其他部件.第8节女鞋后跟的耐侧冲击性
BS 5131-4.9-1991 鞋靴和鞋靴材料试验方法.第4部分其他部件.第9节女鞋后跟的耐疲劳性
BS 5131-5.1-1991 鞋靴和鞋靴材料试验方法.第5部分成品鞋靴试验.第1节粘胶外底和模压外底粘合力
BS 5131-5.11-1981 鞋靴和鞋靴材料试验方法.第5部分成品鞋靴试验.第11节扣系组件强度测定
BS 5131-5.13-1980 鞋靴和鞋靴材料试验方法.第5部分成品鞋靴试验.第13节鞋帮和衬里材料缝合牢度测量
BS 5131-5.2-1991 鞋靴和鞋靴材料试验方法.第5部分成品鞋靴试验.第2节模压橡胶外底硫化度
BS 5131-5.4-1978 鞋靴和鞋靴材料试验方法.第5部分成品鞋靴试验.第4节外靴鞋底粘接的剥离强度
BS 5131-5.5-1978 鞋子和鞋料的试验方法.第5部分成品鞋靴试验.第5节成品鞋的耐水渗透性水糟试验
BS 5131-5.6-1991 鞋靴和鞋靴材料试验方法.第5部分成品鞋靴试验.第6节硬鞋底部件和鞋底冲击试验
BS 5131-5.7-1978 鞋子和鞋料的试验方法.第5部分成品鞋靴试验.第7节硬鞋底部件和鞋底的疲劳试验
BS 5131-5.9-1979 鞋靴和鞋靴材料试验方法.第5部分成品鞋靴试验.第9节鞋后跟掌面强度
BS 5131-6.1-1981 鞋靴和鞋靴材料试验方法.第6部分惯例.第1节通过穿着试验对比评定材料、部件和结构
BS 5131-6.2-1979 鞋靴和鞋靴材料试验方法.第6部分惯例.第2节通过鞋靴穿着试验对设计或结构的主要缺点进行鉴别和适用性评定
BS 5135 碳和碳锰钢的弧焊 中文参考翻译
BS 5136-1981 Specification for Toothpastes
BS 5150-1990铸铁闸阀
BS 5152-1974 中文版 通用铸铁截止阀和截止止回阀规范
BS 5153-1974 中文版 通用铸铁止回阀规范
BS 5155-1984 蝶阀的设计标准
BS 5157-1989 Steel gate (parallel slide) valves
BS 5158-1989 铸铁旋塞阀规范 Specification for cast iron plug valves
BS 5160-1989中文版 钢截止阀截止止回阀和升降式止回阀
BS 5163 中文版 专用扳把操作的供水用铸铁闸阀
BS 5163-1986 专用扳把操作的供水用铸铁闸阀
BS 5164-1975 间接动作的电指示和记录仪表及附件规范
BS 5192-1-1993 生产管理导则.第1部分总则
BS 5192-2-1993 生产管理导则.第2部分生产规划
BS 5192-3-1993 生产管理导则.第3部分定货方法
BS 5192-4-1993 生产管理导则.第4部分调度(职场控制)
BS 5192-5-1993 Guide to production control. The relationship between production control and other management functions
BS 5192-6-1993 生产管理导则.第6部分计算机辅助生产管理
BS 5200-1997 Specification for dimensions of hydraulic connectors and adaptors
BS 5205-1990 可调金属手杖规范
BS 5212-1-1990 Cold applied joint sealant systems for concrete pavements part 1. Specification for joint sealants
BS 5212-2-1990 Cold applied joint sealant systems for concrete pavements part 2 Code of practice for the application and use of joint sealants
BS 5212-3-1990 Cold applied joint sealant systems for concrete pavements part 3. Methods of test
BS 5228-1-2009 Code of practice for noise and vibration control on construction and open sites – Part 1 Noise
BS 5228-2-2009 Code of practice for noise and vibration control on construction and open sites – Part 2 Vibration
BS 5234-1-1992 Partitions(including matching linings)-Part 1-Code of practice for design and installation
BS 5252F-1976 Colour Matching Fan (2004 Revision) (frozen). Order online for next-day delivery.
BS 5255-1989 Specification for Thermoplastics waste pipe and fittings
BS 5262-1991 Code of practice for External renderings
返回标准资料网首页|www.PV265.com
