AS 3575-1995 Amdt 1-1995 Clearing saws, brushcutters and grass trimmers-Safety requirements
AS 3597-2008 Structural and pressure vessel steel - quenched and tempered plate
AS 3632-1993 Powered rotary lawnmowers-Blades and blade mounting attachments
AS 3653-1993 Boilers―Safety, management, combustion and other ancillary equipment
AS 3661.1-1993 Slip resistance of pedestrian surfaces Part 1 Requirements
AS 3675-2002 Conductors—Covered overhead— For working voltages 6.3511 (12) kV up to and including 1933 (36) kV
AS 3688-2005 Water supply - metallic fittings and end connectors
AS 3780-2009 The storage and handling of corrosive substances
AS 3814-2009 Industrial and commercial gas-fired appliances
AS 3920.1-1993 Assurance of product quality Part 1 Pressure equipment manufacture
AS 3959-2009 Construction of buildings in bushfireprone areas
AS 3996-2006 Access Covers and grates
AS 3998-2002 Non-destructive testing – Qualification and certification of personnel
AS 4020-2005 Testing of products for use in contact with drinking water
AS 4024.3001-2009 Safety of machinery Part 3001 Materials forming and shearing—Mechanical power presses
AS 4024.3002-2009 Safety of machinery Part 3002 Materials forming and shearing—Hydraulic power presses
AS 4024.3301-2009 Safety of machinery Part 3301 Robots for industrial environments—Safety requirements
AS 4037-1999 Pressure equipment - Examination and testing
AS 4041-2006 Pressure piping
AS 4057-1992 Powered walk-behind and handheld lawn trimmers and lawn edge trimmers-Mechanical safety requirements and test methods
AS 4084 Supp1-1993 Steel storage racking―Commentary
AS 4100-1990 Steel Structures
AS 4100-1998 Steel structures
AS 4130-2003 Polyethylene (PE) pipes for pressure applications
AS 4156.8-2007 Coal preparation Part 8 Sample pre-treatment - Dropshatter
AS 4176-1994 耐压聚乙烯铝塑复合管和胶联聚乙烯铝塑复合管道系统
AS 4183-2007 Value Management
AS 4254-2002 Ductwork for Air-Handling Systems in Buildings Incorporating AMD 1 September 2002 and AMD 2 October 2004
AS 4265-1995 带轮灭火器
AS 4291.1-2000 Mechanical properties of fasteners made of carbon steel and alloy steel - Bolts, screws and studs
AS 4361.1-1995 Guide to lead paint management Part 1 Industrial applications
AS 4361.2-1998 Guide to lead paint management Part 2 Residential and commercial buildings
AS 4367-2007 Radiocommunications equipment used in the inshore boating radio services band
AS 4438-1997 AMD1-1999 Height adjustable swivel chairs
AS 4506-2005 Metal finishing - Thermoset powder coatings
AS 4534-2006 Zinc and zincaluminium-alloy coatings on steel wire
AS 4557-2009 Domestic outdoor gas barbecues
AS 4565-2004 室外和非居住室内用辐射燃气热水器
AS 4645-2005 Gas distribution network management
AS 4654.1-2009
AS 4654.2-2009
AS 4684-2009 High chairs—Safety requirements
AS 4688-1-2007 Furniture—Fixed height chairs Part 1 Human-interface and general requirements
AS 4688-2-2000 Furniture—Fixed height chairs Part 2 Determination of strength and durability
AS 4688-3-2000 Furniture—Fixed height chairs Part 3 Determination of stability— Upright chairs
AS 4694-2007 Glycemic index of foods
AS 4722-2009 Passenger ropeways and passenger conveyors
AS 4755.3.1-2008 Demand response capabilities and supporting technologies for electrical products Part 3.1
AS 4806-1-2006 Closed circuit television (CCTV)Part 1 Management and operation
AS 4806-2-2006 Closed circuit television (CCTV)Part 2 Application guidelines
AS 4806.3-2006 Closed circuit television (CCTV) Part 3 PAL signal timings and levels
AS 4822-2008 External field joint coatings for steel pipelines
AS 4828.1-2009 Degradability of plastics—Methods of test Method 1 Determination of level of prodegradant ions
AS 4828.2-2008 Degradability of plastics—Methods of test Method 2 Determination of brittle point in plastic film using a tensile elongation test
AS 4828.4-2008 Degradability of plastics—Methods of test Method 4 Test method for heat aging of degradable plastics
AS 4830-2007 Determination of the extinction propensity of cigarettes
AS 4832-2007 Cathodic protection - Installation of galvanic sacrificial anodes in soil
AS 4834-2007 Packaging for surface transport of biological material that may cause disease in humans, animals and plants
AS 4852.1-2009 Variable message signs Part 1 Fixed signs
ISO 105-B02-1994(Amd_2000) 纺织品 色牢度试验 耐人造光色牢度氙弧灯退色试验
ISO 105-E04 1996
ISO 1101-1983 技术制图.几何形位公差.形状.方位.位置和跳动公差.制图的概述.定义.符号和表示法
ISO 1101-2004 中文版 产品几何技术规范(GPS)— 几何公差—形状、方向、位置和跳动公差
ISO 1122-1-1998 齿轮术语词汇.第1部分几何学上的定义 (Vocabulary of gear terms - Part 1 Definitions related to geometry)
ISO 1122-2-1999 齿轮术语词汇.第2部分与蜗轮齿轮几何特性有关的定义 (Vocabulary of gear terms - Part 2 Definitions related to worm gear geometry)
ISO 1127-1992 Stainless steel tubes -- Dimensions, tolerances and conventional masses per unit length
ISO 1167-1-2006 流体传输用热塑管、接头和组件.抗内压力的测定.第1部分通用方法
ISO 1167-2-2006 流体传输用热塑管、接头和组件.抗内压力的测定.第2部分管试件的准备
ISO 1179-3-2007一般用途和流体传动用管接头 ISO 228-1螺纹及橡胶或金属对金属密封件的油口和螺柱端 第3部分 带O形圈及挡圈密封的轻型（L系列）螺柱端
ISO 1179-4-2007一般用途和流体传动用管接头 ISO 228-1螺纹及橡胶或金属对金属密封件的油口和螺柱端 第4部分 通用只带金属对金属密封件(B型)的螺柱端头
ISO 1190-1-1982 Copper and copper alloys-Code of designation-Part 1 Designation of materials
ISO 121-1980 镁铝锌合金锭及铸件化学成分和砂型铸造标准试棒的力学性能
ISO 121-80镁铝锌合金锭及铸件化学成分和砂型铸造标准试棒的力学性能
ISO 1224-1984 滚动轴承 仪器精密轴承
ISO 1234-1997 开口销 Split pins
ISO 1403-2005 一般用途的织物增强的输水橡胶软管.规范 (Rubber hoses, textile-reinforced, for general-purpose water applications - Specification)
ISO 1456-1988 金属镀层.镍加铬的电镀层和铜加镍再加铬的电镀层
ISO 1479-1983 六角头自攻螺钉Hexagon head tapping screws
ISO 1502-1996 中文版 ISO一般用途公制螺纹.测量
ISO 1716-2002 建筑产品对火焰试验的反应.燃烧热的测定(中文翻译版）
ISO 178-1975 中文版 塑料.弯曲性能测定
ISO 1795-2000 天然和合成生橡胶.取样和进一步的准备过程
ISO 180-2000 塑料伊兆特(Izod)冲击强度的测定（英文）包含ISO 180-2000AMD.12006
ISO 1817-2005 硫化橡胶 耐液体作用的测定
ISO 182-1-1990塑料 基于氯乙烯共聚物、均聚物的化合物及产物在高温下析出氯化氢和其他酸性产物的趋势测定 第1部分刚果红法
ISO 1833-1-2006 Textiles — Quantitative chemical analysis —Part 1 General principles of testing
ISO 1833-10-2006 Textiles — Quantitative chemical analysis —Part 10 Mixtures of triacetate or polylactide and certain other fibres (method using dichloromethane)
ISO 1833-11-2006 Textiles — Quantitative chemical analysis —Part 11 Mixtures of cellulose and polyester fibres (method using sulfuric acid)
ISO 1833-13-2006 Textiles — Quantitative chemical analysis —Part 13 Mixtures of certain chlorofibres and certain other fibres (method using carbon disulfideacetone)
ISO 1833-14-2006 Textiles — Quantitative chemical analysis —Part 14 Mixtures of acetate and certain chlorofibres (method using acetic acid)
ISO 1833-15-2006 Textiles — Quantitative chemical analysis —Part 15 Mixtures of jute and certain animal fibres (method by determining nitrogen content)
ISO 1833-16-2006 Textiles — Quantitative chemical analysis —Part 16 Mixtures of polypropylene fibres and certain other fibres (method using xylene)
ISO 1833-17-2006 Textiles — Quantitative chemical analysis —Part 17 Mixtures of chlorofibres (homopolymers of vinyl chloride) and certain other fibres (method using sulfuric acid)
ISO 1833-18-2006 Textiles — Quantitative chemical analysis —Part 18 Mixtures of silk and wool or hair (method using sulfuric acid)
ISO 1833-19-2006 Textiles — Quantitative chemical analysis —Part 19 Mixtures of cellulose fibres and asbestos (method by heating)
ISO 1833-2-2006 Textiles — Quantitative chemical analysis —Part 2 Ternary fibre mixtures
ISO 1833-21-2006 Textiles — Quantitative chemical analysis —Part 21 Mixtures of chlorofibres, certain modacrylics, certain elastanes, acetates, triacetates and certain other fibres
ISO 1833-3-2006 Textiles — Quantitative chemical analysis —Part 3 Mixtures of acetate and certain other fibres (method using acetone)
ISO 1833-4-2006 Textiles — Quantitative chemical analysis —Part 4 Mixtures of certain protein and certain other fibres (method using hypochlorite)
ISO 1833-5-2006 Textiles — Quantitative chemical analysis —Part 5 Mixtures of viscose, cupro or modal and cotton fibres (method using sodium zincate)
ISO 1833-6-2007 Textiles — Quantitative chemical analysis —Part 6 Mixtures of viscose or certain types of cupro or modal or lyocell and cotton fibres (method using formic acid and zinc chloride)
ISO 1833-7-2006 Textiles — Quantitative chemical analysis —Part 7 Mixtures of polyamide and certain other fibres (method using formic acid)
ISO 1833-8-2006 Textiles — Quantitative chemical analysis —Part 8 Mixtures of acetate and triacetate fibres (method using acetone)
ISO 1833-9-2006 Textiles — Quantitative chemical analysis —Part 9 Mixtures of acetate and triacetate fibres (method using benzyl alcohol)
ISO 1853-1998 导电和防静电橡胶电阻率的测量
ISO 1871-1975 农产食品 凯氏法测定氮含量的一般性说明
ISO 1873-1-1995 塑料 聚丙烯(PP)模塑和挤塑材料 第1部分标识系统和规范基础
ISO 1873-2-2007 塑料.聚丙烯(PP)模塑和挤塑材料.第2部分试样制备和性能测定
ISO 1874-2-2006 Plastics - Polyamide (PA) moulding and extrusion materials - Part 2 Preparation of test specimens and determination of properties
ISO 1891-1979 螺栓 螺钉 螺母和附件-术语和命名
ISO 1923-1981 泡沫塑料和橡胶.线性尺寸的测定
ISO 1925-2001 机械振动 平衡 词汇
ISO 2032-1973飞机的耐热设备金属丝
ISO 2060-1994 纺织品.卷装纱线.线密度(单位长度的质量)的测定
ISO 2061-1995 纺织品.纱线捻度的测定.直接计数法
ISO 2062-1993 纺织品--从包装抽取纱线--单端断裂力和断裂伸长的测定
ISO 2063-2005 热喷镀.金属涂层和其他无机覆层.锌、铝及其合金
ISO 2093-1986 Electroplated coatings of tin - Specification and test methods
ISO 2162-1-1993 技术产品文献.弹簧.第1部分简图
ISO 225-1983 紧固件 螺栓、螺钉、螺柱和螺母 尺寸代号和标注
ISO 228-1-2000 Pipe threads where pressure-tight joints are not made on the threads - Part 1 Dimensions, tolerances and designation
ISO 228-2-1987 Pipe threads where pressure-tight joints are not made on the threads; Part 2 Verification by means of limit gauges
ISO 230-52000 机床试验规则第5部分噪声排放的测定
ISO 262-1998 一般用途米制螺纹.螺钉,螺栓和螺母的选用尺寸
ISO 281-2007 Rolling bearings - dynamic load ratings and rating life
ISO 301-1981 锌合金铸锭
ISO 492-2002 滚动轴承 向心轴承 公差
ISO 53-1998 通用和重型机械用圆柱齿轮基本齿廓
ISO 62-2008 Plastics-Determination of water absorption
ISO 65-1981
ISO 657-1-1989 热轧型钢的尺寸.第1部分等边角钢.米制系列.尺寸和截面特性
ISO 683-1-1987 热处理钢、合金钢和易切削钢.第1部分按照不同成形的黑钢制件直接硬化的非合金钢和低合金锻钢
ISO 683-11-1987 热处理钢、合金钢和易切削钢.第11部分锻造表面硬化钢 Heat-treatable steels, alloy steels and free-cutting steels; Part 11 Wrought case-hardening steels
ISO 683-14-2004 热处理钢、合金钢和易切钢 第14部分淬火回火弹簧用热轧钢
ISO 683-15-1992 热处理钢、合金钢和易切削钢.第15部分内燃机气门用钢 Heat-treatable steels, alloy steels and free-cutting steels; part 15 valve steels for internal combustion engines
ISO 683-17-1999 热处理钢、合金钢和易切削钢.第17部分球轴承和滚动轴承钢 Heat-treated steels, alloy steels and free-cutting steels - Part 17 Ball and roller bearing steels
ISO 683-18-1996 热处理钢、合金钢和易切削钢.第18部分非合金和低合金钢光亮产品 Heat-treatable steels, alloy steels and free-cutting steels - Part 18 Bright products of unalloyed and low alloy steels
ISO 724-1993 ISO一般用途米制螺纹.基本尺寸
ISO 815-1-2008Rubber, vulcanized or thermoplastic -Determination of compression set -- Part 1 At ambient or elevated temperatures
ISO 815-2-2008Rubber, vulcanized or thermoplastic - Determination of compression set -- Part 2 At low temperatures
ISO 898-1-2009 中文版 碳钢和铸钢铸造的紧固件机械性能 第1部分：螺栓
ISO 898-1-2009 碳钢和铸钢铸造的紧固件机械性能 第1部分：螺栓
ISO 899-1-2003 Plastics - Determination of creep behaviour - Part 1 Tensile creep
MSS SP-25-1998 中文版 阀门、管件、法兰和管接头的标准标记方法
MSS SP-25-1998
MSS SP-44-96(R2001) 中文版 钢制管道法兰
MSS SP-45-1998 中文版 旁通和排放连接
MSS SP-45-2003E
MSS SP-53-1999(R2002) 中文版 阀门.法兰.管件和其他管道部件用铸钢件和锻钢件质量标准-磁粉检验方法
MSS SP-54-1995 中文版 阀门、法兰、管件和其他管道部件用铸钢件质量标准—射线照相检验方法
MSS SP-54-1999
MSS SP-55 2006 阀门.法兰.管件和其他管道部件用铸钢件和锻钢件质量标准-表面缺陷评定的目视检验方法
MSS SP-6-2001 中文版 管法兰及阀门和端法兰的接触面标准精度
MSS SP-6-2007 管法兰以及阀门和管件端法兰的接触面标准精度
MSS SP-61-1992 钢制阀门的压力试验
MSS SP-61-1999
MSS SP-61-2003 中文版 钢制阀门压力试验
MSS SP-65-1994 中文版 用透镜垫的高压法兰和螺纹短管
MSS SP-67-1995
MSS SP-67-2002 中文版 蝶阀 BUTTERFLY VALVES
MSS SP-67-2002a Butterfly Valves
MSS SP-68-1997
MSS SP-69-2003 Pipe Hangers and Supports - Selection and Application
MSS SP-70-1998
MSS SP-71-1997
MSS SP-72 BALL VALVES WITH FLANGED OR BUTT-WELDING ENDS FOR GENERAL SERVICE[1].
MSS SP-73-2003 铜和铜合金钎焊连接管件用铜焊接头
MSS SP-75-2004 中文版 优质钢制对焊管件规范
MSS SP-79-2004 Socket Welding Reducer Inserts
MSS SP-80-1997
MSS SP-80-2003 青铜闸阀、截止阀、角阀和止回阀
MSS SP-80-2008 青铜闸阀、截止阀、角阀和止回阀
MSS SP-81-2001
MSS SP-82-1992
钢围堰计算
高层钢结构箱形柱的制作
高层钢结构住宅技术与经济分析
高层建筑劲性混凝土梁预制骨架工字钢滑移法施工技术
高钢设计常见问题
高炉炉体框架结构设计探讨
高耐候结构钢
高强度螺栓连接的设计计算
高压输电塔_导线耦联体系的简化抗震计算方法
高压输电塔_线体系抗灾研究的现状与发展趋势
高压输电塔震害及抗震研究
隔墙荷载在双向板上的等效取值
隔震层位置与隔震支座选型
隔震结构设计与分析方法探讨
隔震支座连接处的设计
工程结构优化设计理论与方法
工程勘察收费标准2002
工程设计程序要点
工作状态下栈桥加固设计
关于PKPM软件在工业框架计算中参数及荷载取值的几点讨论
关于多高层钢结构柱计算长度_理论解释
关于多高层钢结构柱计算长度_数例说明
关于多高层钢结构柱计算长度理论解释
关于钢结构抗震设计中轴心受压支撑长细比问题的讨论
关于组合楼盖次梁与主梁连接的计算
管桁架计算模型的选取
管桁架结构计算模型的选取
广州新体育馆屋盖预应力拉索的张拉顺序
焊接结构疲劳强度
杭州萧山国际机场二期扩建国际航站楼钢结构滑移施工
基于Pushover的框架结构抗震性能评估研究
基于SCE算法的结构系统识别
基于不同性能目标的RC结构抗震设计的效益分析
基于纤维模型的超高层钢筋混凝土结构弹塑性时程分析
基于性能的结构抗震设计、理论和方法
基于优化原理的框架梁柱合理线刚度比研究
基于着色Petri网的钢结构施工过程仿真研究
亟待重视设计优化
几个比值的定义及调整,结构设计整体控制指标
几何非线性与材料非线性
几种常见住宅质量通病的产生与防范
计量支付规则
计算多层房屋结构地震作用和剪力的简化方法
计算软件中应力与效应的对比
既有建筑泛碱问题探讨
加强型预应力混凝土管桩抗弯剪性能试验研究
嘉峪关气象塔日照温差作用有限元分析
尖顶斜屋面挂瓦施工技术
兼顾人防工程较一般人防工程的优势
监理工程师在施工组织设计审查中的责任和分寸
减少筏板基础偏心距设计
剪力墙分布筋体积配箍率计算用表
剪力墙结构设计指导书
剪力墙截面设计与构造
剪力墙设计的把握
剪力墙竖直裂缝分析
剪力墙与填充墙间裂缝的质量控制
剪力墙中连梁设计和配筋计算
剪力墙组合配筋方法
返回标准资料网首页|www.PV265.com
