AS 1418.9-1996 起重机规范 第9部分:汽车起升设备
AS 1420-2008 ISO metric hexagon socket head cap screws
AS 1429.1-2006 Electric cables—Polymeric insulated Part 1 For working voltages 1.93.3 (3.6) kV up to and including 1933 (36) kV
AS 1432-2004 Copper tubes for plumbing, gasfitting and drainage applications
AS 1449-1994 Wrought alloy steels-Stainless and heat-resisting steel plate,sheet and strip
AS 1450-1983 STEEL TUBES FOR MECHANICAL PURPOSES
AS 1477-2006 PVC pipes and fittings for pressure applications
AS 1517-1991 Tinplate and blackplate
AS 1518-2002 A1-2006 In our offer you can find new nad used refuse street sweepers. Best street and pavement sweepers offer on Internet
AS 1531-1991 Conductors - Bare overhead - Aluminium and aluminium alloy
AS 1544.2-2003 Methods for impact tests on metals - Charpy V-notch
AS 1544.3-2003 Methods for impact tests on metal - Charpy U-notch and keyhole notch
AS 1544.4-2003 Methods for impact tests on metals - Calibration of the testing machine
AS 1554.1-2004 structural-steelng-welding-of-steel-structures 2
AS 1568-1998 锻造用铜合金
AS 1572-1998 Copper and copper alloys— Seamless tubes for engineering purposes
AS 1573-1995 Copper and copper alloys— Wire for engineering purposes
AS 1574-1996 Copper and copper alloys— Wire for electrical purposes
AS 1579-2001 Arc-welded steel pipes and fittings for water and waste-water
AS 1580.0-2004 Paints and related materials - Methods of test -Part 0 Introduction and list of methods
AS 1627.4-2002 Metal finishing-Preparation and pretreatment of surfaces Part 4 Abrasive blast cleaning
AS 1628-1999 Water supply—Metallic gate, globe and non-return valves
AS 1650-1989 Hot dipped galvanised coating on ferrous articles
AS 1657-1992 Fixed platforms, walkways, stairways and ladders - Design, construction and installation
AS 1660.1-1998 Test methods for electric cables, cords and conductors Method 1 Conductors and metallic components
AS 1666.1-2009 Wire-rope slings Part 1 Product specification
AS 1666.2-2009 Wire-Rope Slings - Part 2 Care and Use
AS 1721-1985 通用米制螺纹
AS 1722.1-1975 螺纹或惠氏螺纹管 第1部分双端螺栓
AS 1722.2-1992 螺纹或惠氏螺纹管 第2部分螺纹扣件
AS 1731.1-2003 Refrigerated display cabinets Part 1 Terms and definitions
AS 1731.14-2003 Refrigerated display cabinets
AS 1731.14-2003(A1-2005) Refrigerated display cabinets Part 14 Minimum energy performance Standard (MEPS) requirements
AS 1731.4-2003 Refrigerated display cabinets Part 4 General test conditions
AS 1731.5-2003 Refrigerated display cabinets Part 5 Temperature test
AS 1731.6-2003 Refrigerated display cabinets Part 6 Classification according to temperatures
AS 1731.9-2003 Refrigerated display cabinets Part 9 Electrical energy consumption test
AS 1742.4-2008 Manual of uniform traffic control devices Part 4 Speed controls
AS 1746-1991 硬铜绞线
AS 1774.14-2008 Refractories and refractory materials— Physical test methods Method 14 Thermal conductivity
AS 1774.29-2008 Refractories and refractory materials—Physical test methods Method 29 Cast coverage
AS 1774.7-2008 Refractories and refractory materials— Physical test methods Method 7 Permeability to gases
AS 1815.1-2007 Metallic materials-Rockwell hardness test Method 1 Test method (scales A,B,C,D,E,F,G,H,K,N,T)
AS 1815.1-2007 Metallic materials—Rockwell hardness test Method 1 Test method (scales A,B,C,D,E,F,G,H,K,N,T)
AS 1815.2-2007 Metallic materials-Rockwell hardness test Method 2 Verification and calibration of testing machine (scales A,B,C,D,E,F,G,H,K,N,T
AS 1815.2-2007 Metallic materials—Rockwell hardness test Method 2 Verification and calibration of testing machine (scales A,B,C,D,E,F,G,H,K,N,T
AS 1815.3-2007 Metallic materials—Rockwell hardness test Method 3 Calibration of reference blocks (scales A,B,C,D,E,F,G,H,K,N,T)(ISO 6508-32005, MOD)
AS 1816.1-2007 Metallic materials-Brinell hardness test Method 1 Test method (ISO 6506-12005, MOD)
AS 1816.1-2007 Metallic materials—Brinell hardness test Method 1 Test method (ISO 6506-12005, MOD)
AS 1816.2-2002 Metallic materials—Brinell hardness test. Method 2 Verification and calibration of testing
AS 1816.2-2007 Metallic materials-Brinell hardness test Method 2 Verification and calibration of testing machines
AS 1816.2-2007 Metallic materials—Brinell hardness test Method 2 Verification and calibration of testing machines
AS 1816.3-2002 Metallic materials - Brinell hardness test - Calibration of reference blocks
AS 1816.3-2007 Metallic materials-Brinell hardness test Method 3 Calibration of reference blocks
AS 1816.3-2007 Metallic materials—Brinell hardness test Method 3 Calibration of reference blocks
AS 1816.4-2007 Metallic materials-Brinell hardness test Method 4 Table of hardness values
AS 1816.4-2007 Metallic materials—Brinell hardness test Method 4 Table of hardness values
ASME 超声波规程
ASME B31.1-2007 Power Piping
ASME B36.10-2004 焊接和无缝轧制钢管(中文版)
ASME BPE GR部分 生物加工设备中文版
ASME PTC 19.1-2005 试验不确定度 Test Uncertainty
ASME 射线规程
ASME 渗透规程
ASME 磁粉规程
ASME 16.1-2005 铸铁管法兰和法兰管件
ASME 31.8 - Design Code for Gas Transmission Lines(1999 ed)
ASME A112.18.1-2005
ASME A112.18.2-2005
ASME A112.18.6-2003
ASME A112.18.6-2009 Flexible water connectors
ASME A112.18.8-2009 水管下水道系统用内嵌式生活排污阀
ASME A112.19.2-2003 抽水马桶与小便池水的釉瓷管道装配和水压要求
ASME A112.19.2-2008 陶瓷管紧固件
ASME A112.19.8A-2008 Suction Fittings for Use in Swimming Pool, Wading Pools, Spas, Hot Tubs and Whirlpool
ASME A112.4.1-1993 (R2002) Water Heater Relief Valve Drain Tubes
ASME A112.6.3-2001 Floor and Trench Drains
ASME ANSI PTC 19.2-1987 Pressure Measurement Instruments and Apparatus
ASME ANSI PTC 22-2005 燃气轮机的性能试验规程 Performance Test Code on Gas Turbines
ASME B1.1-2003
ASME B1.1-2003统一英制螺纹中文版
ASME B1.15-1995
ASME B1.20.1-1983 R2001
ASME B1.20.1-1983(R2001) 中文版通用管螺纹(英制)
ASME B1.20.3-1976干封管螺纹(英制)Dryseal pipe threads (inch)
ASME B1.20.5-1991 GAGING FOR DRYSEAL PIPE THREADS(INCH)
ASME B1.20.5-1991(R1998)中文版 干密封管螺纹的检测(英制)
ASME B1.20.7-98 中文版 英制软管接头螺纹尺寸验收
ASME B1.30-2002(R2007) 螺纹计算和圆整尺寸的标准规范
ASME B1.3M-1992 螺纹测量体系的可接受尺寸.英制和米制螺纹
ASME B1.5-1997
ASME B1.7M-01 Nomenclature Definitions and Letter Symbols for Screw Threads
ASME B1.8-1988
ASME B16.1-1998 中文版 铸铁管法兰和法兰管件
ASME B16.10-1992 中文版 阀门的面至面和端至端尺寸
ASME B16.10-2000 中文版 阀门结构长度
ASME B16.10-2000
ASME B16.11- 2009 承插焊和螺纹锻造管件
ASME B16.11-2005承插焊和螺纹锻造管件
ASME B16.11-92中文版
ASME B16.12-1991 cast iro thread drainage fitting
ASME B16.12-1998 铸铁螺纹排水管件 Cast iron threaded drainage fittings
ASME B16.14-1991 中文版 钢铁管螺纹管堵、内外螺丝和锁紧螺母
ASME B16.14-1991 钢铁制管螺塞、衬套和防松螺母
ASME B16.18-1984Cast Copper Alloy Solder Joint Pressure Fittings
ASME B16.21-2005 中文版 管法兰用非金属平垫片
ASME B16.23-2002 DWV类铸铜合金钎焊连接排水管件标准
ASME B16.24-1991 铸铁管道法兰和带法兰管件 Cast Copper Alloy Pipe Flanges and Flanged Fittings Class 150, 300,400,600,900,1500, and 2500
ASME B16.25 - 2007 对焊端 Buttwelding Ends
ASME B16.25-1997 对焊端 (中文)
ASME B16.25-2003 中文版 对焊端
ASME B16.28-1994 中文版 锻轧钢制对接焊小弯曲半径弯头和180°弯头
ASME B16.28-1994钢制对焊小半径弯头和回头弯
ASME B16.29-2001 DWV类可锻铜和可锻铜合金钎焊连接排水管接头 (Wrought copper and wrought copper alloy solder joint drainage fittings - DWV)
ASME B16.3-1998 中文版 可锻铸铁螺纹管件(150和300磅级)
ASME B16.3-1998 可锻铸铁螺纹管件(150和300磅级)
ASME B16.34-2004法兰,螺纹和焊接端连接的阀门(中文版)
ASME B16.34-2009 阀门.带法兰、有螺纹和焊接端部
ASME B16.34a-1998 法兰,螺纹和焊接端连接的阀门
ASME B16.36-2006 Orifice Flanges
ASME B16.4- 2006 灰铸铁螺纹管件 125和250磅级
ASME B16.4-1998 中文版 灰铸铁螺纹管件 125和250磅级
ASME B16.4-1998 灰铸铁螺纹管件 Gray iron threaded fittings classes 125and 250
ASME B16.42-1998 中文版 球墨铸铁管法兰和法兰管件 150和300磅级
ASME B16.42-1998 球墨铸铁管法兰和法兰管件 150和300磅级
ASME B16.47-1996 中文版 大直径管钢制法兰(NPS26-NPS60)
ASME B16.48-1997 中文版 钢制管线肓板
ASME B16.48-2005
ASME B16.49-2000 factory-made wrought steel buttwelding induction bends for...
ASME B16.5-1(95)
ASME B16.5-2003
ASME B16.9-2007 FACTORY-MADE WROUGHT BUTTWELDING FITTINGS
ASME B16.9-2007 工厂制造的锻轧制对焊管配件
ASME B16.9
ASME B16[1].20a -2000 管法兰用环垫片螺旋缠绕式和夹层式金属垫片,
ASME B16[1].39-1998
ASME B16[1].47 & AWWA
ASME B18.2.1-1999a 方头及六角头螺栓和螺钉(中文)
ASME B18.2.1-2010 Square, Hex, Heavy Hex, and Askew Head Bolts and Hex, Heavy Hex, Hex Flange, Lobed Head, and Lag Screws (Inch Series)
ASME B18.2.2-1987方螺母和六角螺母(英制系列)
ASME B18.2.2-2010 Nuts for General Applications Machine Screw Nuts, Hex, Square, Hex Flange, and Coupling Nuts (Inch Series)
ASME B18.2.3.5M-1979 Metric hex bolts
ASME B18.2.4.1M-2002 Metric hex nuts style 1
ASME B18.2.4.2M-1979 Metric hex nuts style 2
ASME B18.2.4.6M-1979 Metric heavy hex nuts
ASME B18.3.2M-1979 米制六角板手和板手头
ASME B18.3.3M-1986 米制六角凹头有肩螺钉
ASME Ⅷ-1、Ⅷ-2介绍 (和设计有关的内容)
ASME Ⅷ-1压力容器基本受压元件强度分析
ASME Ⅷ-1规范中材料低温操作冲击功试验的豁免条件及影响因素
ASME-46℃,-101℃低温钢(锻件,钢管,管件)的开发和应用
AWWA A100-1997 Water Wells
AWWA B100-1996 过滤材料 Granular Filter Material
AWWA B306-2007 Aqua Ammonia (Liquid Ammonium Hydroxide)
AWWA B511-2005 氢氧化钾 Potassium Hydroxide
AWWA B605-2007 Reactivation of Granular Activated Carbon
AWWA B701-2006 氟化钠 Sodium Fluoride-Ninth Edition
AWWA B702-2006 氟硅酸钠 Sodium Fluorosilicate
AWWA C110-2003 水质其他介质用球墨铸铁和灰铸铁管件,3~48in(75~1200mm)
AWWA C111-1995 球墨铸铁压力管和配件用橡胶垫接头
AWWA C111A21.11-2000
AWWA C111A21.11-2007 Rubber-Gasket Joints for Ductile-Iron Pressure Pipe and Fittings
AWWA C115A21.15-2005 Flanged Ductile-Iron Pipe with Ductile-Iron or Gray-Iron Threaded Flanges
AWWA C116A 21.16-1998 给水设备用球墨铸铁和灰铁配件的内外表面的防护熔融胶合环氧涂层
AWWA C153-2000
AWWA C200-1997
AWWA C203-1997 Coal-Tar Protective Coatings and Linings for Steel Water Pipelines – Enamel and Tape – Hot-Applied
AWWA C203-2002 给水钢管煤焦油保护涂层和内衬.热用搪瓷和胶带
AWWA C205-2000 钢制水管用水泥砂浆保护衬和覆层.大于等于4英寸(100mm).车间用
AWWA C206
AWWA C207-1994 给水工程用钢制管法兰.4英寸-144英寸(100mm-3600mm)
AWWA C207-2001
AWWA C207-2007 Steel Pipe Flanges for Waterworks Service
AWWA C208-2007 结构钢制水工业管件
AWWA C209-2000 钢水管用特殊部件、连接件和配件的外部用低温磁带涂层
AWWA C210-2003
AWWA C213-2001 给水钢管的内、外层熔化粘结环氧涂层
AWWA C214-2000 供水钢管外部胶带包覆系统
AWWA C216-1994 给水钢管用专用部件、连接件和配件外部可热收缩交联的聚烯烃涂层
AWWA C217-1999 供水钢管道专用型钢、连接件和配件外部低温矿脂带和矿脂腊油带包覆层
返回标准资料网首页|www.PV265.com