RSS订阅当前栏目 下载首页| 国家标准 | 行业标准 | 国外标准 | 书籍手册 | 软件工具 | 最新更新 | 下载排行 | 网站地图 | 高级搜索 | 按月归档
文档搜索： （不可包含符号 “ / ”） 搜索帮助？
您的位置:首页 > 标准资料网 栏目分类 > 按月归档
[2013年02月更新标准免费下载] |　 19876   首页 上一页 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 下一页 尾页
  • JIS K6267-2006 Rubber, vulcanized or thermoplastic -- Determination of stain properties
  • JIS K6268-1998 硫化橡胶—密度测定
  • JIS K6269 1998 用氧指数法进行硫化橡胶和热塑性橡胶燃烧性试验的方法
  • JIS K6270 2001 硫化橡胶和热塑性橡胶—拉伸疲劳特性的测定方法—定应变法
  • JIS K6271-2001 硫化橡胶或热塑性塑料 体积和表面电阻率测定
  • JIS K6272-2003 Rubber -- Tensile, flexural and compression test equipment (constant rate of traverse) -- Specification
  • JIS K6273-2006 Rubber, vulcanized or thermoplastic -- Determination of tension set, elongation and creep
  • JIS K6274-2006 Rubber and plastics -- Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
  • JIS K6298-2004 Rubber, raw natural and raw synthetic -- Sampling
  • JIS K6298-2009 Rubber, raw natural and raw synthetic- Sampling and further preparative procedures
  • JIS K6299-2001 Rubber -- Preparation of test pieces
  • JIS K6300-2-2001 Rubber, unvulcanized -- Physical property -- Part 2：Determination of cure characteristics with oscillating curemeters
  • JIS K6302-1994 Pneumatic tyres for bicycles
  • JIS K6304-1994 Inner tubes for bicycle tyres
  • JIS K6316-1998 Vulcanized particulate rubber
  • JIS K6322-1999 Ply construction conveyor belts
  • JIS K6323-1995 Classical V belts for power transmission
  • JIS K6323-1995 英文版 动力传送用普通三角皮带
  • JIS K6324-2000 耐火输送机胶带.分类和试验方法
  • JIS K6330-1-2003 橡胶和塑料软管的测试方法.第1部分软管和软管组件尺寸的测量方法
  • JIS K6330-10-1998 橡胶和塑料软管的试验方法.第10部分通过软管壁对液体传输进行的测定
  • JIS K6330-2-1998 橡胶和塑料软管的测试方法.第2部分液体静力法
  • JIS K6330-3-1998 橡胶和塑料软管的测试方法.第2部分抽吸阻力的测定
  • JIS K6330-4-2003 橡胶和塑料软管的测试方法.第4部分低于室温的弯曲试验
  • JIS K6330-5-1998 橡胶和塑料软管的试验方法.第5部分电阻的测定
  • JIS K6330-6-1998 橡胶和塑料软管的测试方法.第6部分部件间附着力的测定
  • JIS K6330-7-1998 橡胶和塑料软管的试验方法.第7部分静态条件下对臭氧抗性的评估
  • JIS K6330-8-1998 橡胶和塑料软管的试验方法.第8部分无收缩的液压脉冲试验
  • JIS K6330-9-2003 橡胶和塑料软管的测试方法.第9部分软管和管件的弯曲性能
  • JIS K6343-2004 Rubber hoses for oil discharge
  • JIS K6346-1999 Rubber hoses and hose assemblies -- On-shore oil suction and discharge -- Specification
  • JIS K6348-2006 Rubber tubes for gas
  • JIS K6349-1-1999 Wire reinforced rubber hoses for hydraulic－Part 1 Rubber hoses and hose assemblies－Wire-reinforced hydraulic type－Specification
  • JIS K6349-1-1999 液压用钢丝增强橡胶软管 第1部分橡胶软管和软管组件 线增强液压型 规范
  • JIS K6349-2-1999 Wire reinforced rubber hoses for hydraulic－Part 2 Rubber hoses and hose assemblies－Rubber-covered, spiral wire reinforced, hydraulic type－Specification
  • JIS K6349-2-1999 液压用钢丝增强橡胶软管 第2部分橡胶软管和软管组件 橡胶包覆的螺旋线增强液压型 规范
  • JIS K6349-3-1999 Wire reinforced rubber hoses for hydraulic－Part 3 Wire reinforced rubber hoses
  • JIS K6349-3-1999 液压用钢丝增强橡胶软管.第3部分线增强橡胶软管
  • JIS K6351-2006 Wire reinforced rubber hoses and hose assemblies for gas
  • JIS K6352-2005 天然橡胶(NR).试验方法
  • JIS K6353-1997 水用橡胶产品
  • JIS K6353-2006 水用橡胶产品(修改件1)
  • JIS K6353-2009 水用橡胶产品(修改件2)
  • JIS K6366-1998 Motorcycle tyres
  • JIS K6368-1977 E Narrow V Belts for Power Transmission
  • JIS K6368-1999 Narrow V belts for power transmission
  • JIS K6369-2007 Steel cord conveyor belts
  • JIS K6370-1999 Compounded stock for retread and repair
  • JIS K6372-1995 英文版 动力传送用同步传送带
  • JIS K6373-1995 Synchronous belts for light duty power transmission
  • JIS K6374-2008 Light conveyor belts - Tolerances on widths and lengths of cut light conveyor belts
  • JIS K6374-2008 Light conveyor belts -- Tolerances on widths and lengths of cut light conveyor belts
  • JIS K6375-1999 塑料软管和软管组件.液压型织物增强的热塑性塑料.规范
  • JIS K6376-2009 Light conveyor belts-Determination of the maximum tensile strength
  • JIS K6379-1999 Rubber hoses and hose assemblies -- Textile-reinforced hydraulic type -- Specification
  • JIS K6380-1999 橡胶填料
  • JIS K6380-1999
  • JIS K6380-1999橡胶填料Rubber packing material
  • JIS K6383-2001 Styrene-butadiene rubber (SBR) -- Emulsion-and solution-polymerized types -- Evaluation procedures
  • JIS K6384-2001 丁腈橡胶(NBR).评定程序
  • JIS K6385-2001 橡胶阻振器的试验方法
  • JIS K6386-1999 Rubber materials for vibration isolators
  • JIS K6387-1-2005 Rubber latex -- Part 1- Sampling
  • JIS K6387-2-1998 Latex, rubber -- Determination of total solids content
  • JIS K6388-2001 Chloroprene rubber (CR) -- General-purpose types -- Evaluation procedure
  • JIS K6389-2007 Halogenated isobutene-isoprene rubber (BIIR and CIIR) -- Test methods
  • JIS K6394-1998 硫化或热塑橡胶的动态特性试验方法
  • JIS K6394-2007 Rubber, vulcanized or thermoplastic -- Determination of dynamic properties -- General guidance
  • JIS K6395-2003 橡胶,乙丙橡胶二烯烃(EPDM)--试验方法
  • JIS K6396-2007 Isobutene-isoprene rubber (IIR) -- Test methods
  • JIS K6400-1-2004 挠性多孔聚合材料.物理性能的测定.第1部分 总则
  • JIS K6400-2-2004 挠性多孔聚合材料.物理性能的测定.第2部分 压缩硬度(压痕技术)和压缩应力应变特性
  • JIS K6400-3-2004 挠性多孔聚合材料.物理性能的测定.第3部分 回弹性
  • JIS K6400-4-2004 挠性多孔聚合材料.物理性能的测定.第4部分 压缩变形和疲劳特性
  • JIS K6400-5-2004 挠性多孔聚合材料.物理性能的测定.第5部分 抗拉强度、断裂时的伸长率和撕裂强度
  • JIS K6400-6-2004 挠性多孔聚合材料.物理性能的测定.第6部分燃烧特性
  • JIS K6400-7-2004 挠性多孔聚合材料.物理性能的测定.第7部分透气性
  • JIS K6401-2005 Polymeric materials, cellular flexible-Polyurethane foam for load-bearing applications-Specification
  • JIS K6403-1999 汽车用硫化橡胶的分类系统
  • JIS K6404-1-1999 橡胶或塑料涂覆织物 调节和测试的标准环境
  • JIS K6404-12-1999 橡胶或塑料涂覆织物的试验方法 第12部分加速老化试验
  • JIS K6404-13-1999 橡胶或塑料涂覆织物的试验方法 第13部分低温弯曲试验
  • JIS K6404-14-1999 橡胶或塑料涂覆织物的试验方法 第14部分粘结阻力的测定
  • JIS K6404-15-1999 橡胶或塑料涂覆织物的试验方法 第15部分水蒸气的渗透率
  • JIS K6404-2-1-1999 橡胶或塑料涂覆织物的试验方法 卷料参数的测定 第1部分一卷的长度、宽度和净重的测定方法
  • JIS K6404-2-2-1999 橡胶或塑料涂覆织物的试验方法 第2部分每单位面积总质量、涂料质量和衬底每单位面积质量的测定方法
  • JIS K6404-2-3-1999 橡胶或塑料涂覆织物的试验方法 卷料参数的测定
  • JIS K6404-4-1999 橡胶或塑料涂覆织物的试验方法 第4部分抗撕裂强度的测定
  • JIS K6404-5-1999 橡胶或塑料涂覆织物的试验方法 第5部分涂料粘性的测定
  • JIS K6418-2007 Thermoplastic elastomers -- Nomenclature and abbreviated terms
  • JIS K6422-2007 Rubber vibration isolators -- Classification standard and testing methods
  • JIS K6430-2008 Rubber compounding ingredients -- Silica -- Test methods
  • JIS K6505-1995 Testing method for man-made upper material of shoes
  • JIS K6545-1994 Testing method for flexing endurance of light leathers and their surface finishes
  • JIS K6601-1995 Man-made upper material of shoes
  • JIS K6723-1995 Plasticized polyvinyl chloride compounds
  • JIS K6723-1995 增塑聚氯乙烯化合物
  • JIS K6723-2006 Plasticized polyvinyl chloride compounds(Amendment 1)
  • JIS K6729-1977 Testing methods for polyvinyl formal
  • JIS K6734-2000 塑料.未增塑的聚氯乙烯板
  • JIS K6735-2006 Plastics -- Polycarbonate sheets -- Types, dimensions and characteristics
  • JIS K6739-2007 Unplasticized poly (vinyl chloride) (PVC-U) pipe fittings for drain
  • JIS K6741-2007 Unplasticized poly (vinyl chloride) (PVC-U) pipes
  • JIS K6742-2007 Unplasticized poly (vinyl chloride) (PVC-U) pipes for water supply
  • JIS K6743-2007 输水用硬质聚氯乙烯管接头
  • JIS K6743-2009 输水用硬质聚氯乙烯管接头(修改件1)
  • JIS K6744-1992 聚氯乙烯覆膜金属板
  • JIS K6744-2007 聚氯乙烯涂覆的和层压金属薄板(修改件1)
  • JIS K6745-2008 Plastics-Unplasticized poly (vinyl chloride) sheets
  • JIS K6759-1995 丙烯腈的试验方法
  • JIS K6766-2008 金属表面的聚乙烯薄膜的测试方法
  • JIS K6769-2004 交联聚乙烯(PE-X)管
  • JIS K6769-2009 交联聚乙烯(PE-X)管(修改件1)
  • JIS K6770-2004 交联聚乙烯(PE-X)管配件
  • JIS K6770-2008 交联聚乙烯(PE-X)管配件(修改件1)
  • JIS K6770-2009 Crosslinked polyethylene (PE-X) pipe fittings(修改件2)
  • JIS K6771-1995 柔性乙烯管件
  • JIS K6772-1994 Polyvinylchloride coated fabric
  • JIS K6773--2007 聚氯乙烯截水薄板(修改件1)
  • JIS K6774-2005 气体燃料供应用聚乙烯管
  • JIS K6776-2007 Chlorinated poly (vinyl chloride) (PVC-C) pipes for hot and cold water supply
  • JIS K6777-2007 冷热水供水系统用氯化聚氯乙烯(PVC-C)管道配件
  • JIS K6777-2009 冷热水供水系统用氯化聚氯乙烯(PVC-C)管道配件(追補1)
  • JIS K6778-2004 聚烯烃(PB)管
  • JIS K6778-2009 聚烯烃(PB)管(追補1)
  • JIS K6779-2004 聚烯烃(PB)管配件
  • JIS K6779-2009 聚烯烃(PB)管配件(追補1)
  • JIS K6780-2003 外墙用聚乙烯管
  • JIS K6783-1994 农业用乙烯乙酸乙烯共聚物薄膜
  • JIS K6783-2009 农业用乙烯乙酸乙烯共聚物薄膜(追補1)
  • JIS K6787-2004 给水用交联聚乙烯管(PE-X)
  • JIS K6787-2009 给水用交联聚乙烯管(PE-X)(追補1)
  • JIS K6788-2004 给水用交联聚乙烯管(PE-X)配件
  • JIS K6788-2009 给水用交联聚乙烯管(PE-X)配件(追補1)
  • JIS K6792-2004 给水用聚烯烃管(PB)
  • JIS K6792-2009 给水用聚烯烃管(PB)(追補1)
  • JIS K6793-2004 给水用聚烯烃管(PB)配件
  • JIS K6793-2009 给水用聚烯烃管(PB)配件(追補1)
  • JIS K6804-2003 Poly(vinylacetate)emulsion adhesives for woods
  • JIS K6806-2003 木材用水性高分子异氰酸酯胶粘剂(正误表)
  • JIS K6806-2003 木材用水性高分子异氰酸酯胶粘剂
  • JIS K6806-2003 水性高分子－异氰酸酯木材粘接剂
  • JIS K6816-2008 Thermoplastics pipes and fittings- Test method for Vicat softening temperature
  • JIS K6850-1999 Adhesives－Determination of tensile lap-shear strength of rigid-to-rigid bonded assemblies
  • JIS K6852-1994 压缩载荷时胶粘剂抗剪切强度试验方法
  • JIS K6854-1-1999 Adhesives -- Determination of peel strength of bonded assemblies -- Part 1：90 degree SIGN peel
  • JIS K6854-1-1999
  • JIS K6854-2-1999 Adhesives－Determination of peel strength of bonded assemblies－Part2 180°peel
  • JIS K6867-1999 胶粘剂.结构粘结部件耐久性的特性.楔形破裂试验
  • JIS K6869-2009 Plastics-Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography
  • JIS K6876-1-2006 塑料.丙烯腈-苯乙烯-丙烯酸脂(ASA)、丙烯腈-(乙烯-丙烯-二烯)-苯乙烯(AEPDS)和丙烯腈-(聚氯乙烯)-苯乙
  • JIS K6876-2-2007 塑料.丙烯腈-苯乙烯-丙烯酸酯(ASA)、丙烯腈-(乙烯-丙烯-二烯烃)-苯乙烯(AEPDS)和丙烯腈-(聚氯乙烯)-苯乙烯
  • JIS K6883-2008 Plastics -- Perfluoroalkoxyalkane (PFA) tubes
  • JIS K6891-1995 压缩成型用粉试验方法
  • JIS K6896-1995 PTFE树脂粉
  • JIS K6899-1-2006 Plastics -- Symbols and abbreviated terms -- Part 1：Basic polymers and their special characteristics
  • JIS K6902-2007 层状热固高压装饰板的试验方法
  • JIS K6902-2008 Testing method for laminated thermosetting high-pressure decorative sheets(Amendment 1)
  • JIS K6903-2007 层压热固高压装饰板Laminated thermosetting high-pressure decorative sheets
  • JIS K6903-2008 层状热固高压装饰板
  • JIS K6910-2007 Testing methods for phenolic resins
  • JIS K6911-1995 热固性塑料的试验方法
  • JIS K6911-2006 Testing methods for thermosetting plastics
  • JIS K6915-1-2006 Plastics -- Phenolic moulding compounds -- Part 1：Designation system and basis for specifications
  • JIS K6915-2-2006 Plastics -- Phenolic moulding compounds -- Part 2：Preparation of test specimens and determination of properties
  • JIS K6915-2006 Phenolic moulding compounds
  • JIS K6916-1-2006 Plastics -- Urea-formaldehyde moulding compounds -- Part 1：Designation system and basis for specifications
  • JIS K6916-2-2006 Plastics -- Urea-formaldehyde moulding compounds -- Part 2：Preparation of test specimens and determination of properties
  • JIS K6916-2006 Urea-formaldehyde moulding compounds
  • JIS K6917-1-2006 Plastics -- Melamine-formaldehyde moulding compounds -- Part 1：Designation system and basis for specifications
  • JIS K6917-2-2006 Plastics -- Melamine-formaldehyde moulding compounds -- Part 2：Preparation of test specimens and determination of properties
  • JIS K6917-2006 Melamine-formaldehyde moulding compounds
  • JIS K6918-2007 Diallyl phthalate moulding compounds
  • JIS K6919-1992 纤维增强塑料用液态不饱和聚酯树脂(追補1)
  • JIS K6919-1992 纤维增强塑料用液态不饱和聚酯树脂
  • JIS K6930-1994 农业用聚氯乙烯薄膜回收颗粒状铸模材料
  • JIS K6930-2009 农业用聚氯乙烯薄膜回收颗粒状铸模材料(追補1)
  • JIS K6932-2007 Recycled plastics stakes
  • JIS K6938-1-2006 塑料－甲基丙烯酸甲酯丙烯腈丁二烯苯乙烯(MABS)模塑和挤压材料－第1部分：命名系统及规格标志的基础
  • JIS K6938-2-2007 塑料.甲基丙烯酸甲酯-丙烯腈-丁二烯-苯乙烯(MABS)模塑和挤塑材料.第2部分试样制备和性能测定
  • JIS K6960-2008 塑料.在高固相厌氧消化条件下测定最终厌氧生物降解.释放的沼气分析法
  • JIS K7001-1990 Amylase for industrial use
  • JIS K7002-1988 Glucose isomerase for industrial use
  • JIS K7010-1995 Vocabulary for fibre reinforced plastic
  • JIS K7011-1989 Glass fiber reinforced plastics for structural use
  • JIS K7012-1999 Glass-fiber reinforced thermosetting resin chemical-resistant tanks
  • JIS K7013-1997 Fibre reinforced plastic pipes
  • JIS K7013-2009 纤维增强塑料管(追補1)
  • DIN 13-1-1999 通用ISO米制螺纹.第1部分粗牙螺纹的公称尺寸.螺纹公称直径1--68mm
  • DIN 13-20-2000 一般用途的ISO米制螺纹.第20部分带优先公差级的粗牙螺纹的尺寸极限.公称直径1-68mm
  • DIN 13-24-2005 ISO 米制螺纹 公称直径112-180mm细牙螺纹的极限尺寸 常用公差等级
  • DIN 13-5-1999 通用ISO米制螺纹.第5部分螺距1mm和1,25mm的细牙螺纹的公称尺寸.螺纹公称直径7,5--200mm
  • DIN 13-51-2005 ISO通用米制螺纹.第51部分过渡配合用外螺纹(以前静配合用螺纹).公差、极限偏差、尺寸极限
  • DIN 13-7-1999 通用ISO米制螺纹 第7部分 螺距2mm的细牙螺纹的公称尺寸.螺纹公称直径17--300mm
  • DIN 168-1979 中文版 圆螺纹 螺纹尺寸
  • DIN 267-24-2007 紧固件交货技术条件.第24部分不带规定验证载荷值的螺母用硬度等级
  • DIN 267-26-2005
  • DIN 267-28 2007 紧固件.第28部分带压紧层的钢制螺钉、螺栓和螺柱.技术规范
  • DIN 32-3-1981
  • DIN 5412-1-1982 滚动轴承.圆柱滚柱轴承.第1部分单列,带保持架,可分离的斜挡圈的滚动轴承
  • DIN 5412-4-1982 Rolling bearings - Cylindrical roller bearings - Part 4 Double row, with cage, increased accuracy
  • DIN 5419-1959 E毛毡圈
  • DIN 5480-1-2006
  • DIN 5480-10-1991 渐开线花键轴连接.啮合角30°.模数5的基础尺寸和试验尺寸
  • DIN 5480-11-1991 渐开线花键轴连接.啮合角30°.模数6的基础尺寸和试验尺寸
  • DIN 5480-12-1991 渐开线花键轴连接.啮合角30°.模数8基础尺寸和试验尺寸
  • DIN 5480-13-1991 渐开线花键轴连接.啮合角30°.模数10基础尺寸和试验尺寸
  • DIN 5480-14-1986 渐开线花键轴连接.啮合角30°.侧面配合.公差
  • DIN 5480-15-2006
  • DIN 5480-16-2006
  • DIN 5480-2-2006
  • DIN 5480-3-1991 渐开线花键轴连接.啮合角30°.模数0.5、0.6、0.75、0.8和1的基础尺寸和试验尺寸
  • DIN 5480-4-1991 渐开线花键轴连接.啮合角30°.模数1.25的基础尺寸和试验尺寸
  • DIN 5480-5-1991 渐开线花键轴连接.啮合角30°.模数1.7和1.75的基础尺寸和试验尺寸
  • DIN 5480-6-1991 渐开线花键轴连接.啮合角30°.模数2的基础尺寸和试验尺寸
  • DIN 5480-7-1991 渐开线花键轴连接.啮合角30°.模数2.5的基础尺寸和试验尺寸
  • DIN 5480-8-1991 渐开线花键轴连接.啮合角30°.模数3的基础尺寸和试验尺
  • DIN 5480-9-1991 渐开线花键轴连接.啮合角30°.模数4的基础尺寸和试验尺寸
  • DIN 5480花键计算程序2009版
  • DIN 5482 渐开线花键 中文参考版
  • DIN 5482 渐开线花键标准
  • DIN 5510-1-1988
  • DIN 5510-2-2003
  • DIN 5510-4-1988
  • DIN 5510-5-1988
  • DIN 5510-6-1988
  • DIN 5512-1-1997
  • DIN 5512-2-1997
  • DIN 5512-4-1997
  • DIN 5687-1-1996
  • DIN 6172-1993
  • DIN 6174-1979
  • DIN 6773-2001 钢铁材料热处理.热处理件.图样画法及标注. (Heat treatment of ferrous metals - Heat treated parts, presentation and indications on drawings)
  • DIN 6799-1981
  • DIN 6888-1956 键连接.半圆键.尺寸和应用
  • DIN 6905-1990 SPRING WASHER FOR SCREW AND WASHER ASSEMBLIES
  • DIN 6908-1995 组合螺钉用锥形弹性垫圈 (Conical spring washers for screw and washer assemblies)
  • DIN 7080-2005
  • DIN 7081-1999
  • DIN 7167-1987
  • DIN 74-2003
  • DIN 7444-2008 棒形单头梅花扳手
  • DIN 7526-1969钢模锻件 尺寸公差
  • DIN 7540-1980 5级环钩
  • DIN 7601-1998 带球形衬套的压接接头
  • DIN 7603-2001
  • DIN 7603-2001密封垫圈标准 Ring srals and gaskets
  • DIN 7715-1-1977
  • DIN 7715-40-1998
  • DIN 7715-5-1979
  • DIN 7716-1982
  • DIN 7721-1-1989 ENG
  • DIN 7721-2-1989
  • DIN 7753-1-1988
  • DIN 82-1973 ENG
  • DIN EN ISO 10484-2004 螺母的扩孔试验
  • DIN EN ISO 10642-2004
  • DIN EN ISO 10644-1998 带平垫圈的螺钉和垫圈组件.垫圈硬度级别为200HV和300HV
  • DIN EN ISO 10673-1998 螺钉和垫圈组合件用平垫圈 小、标准和大系列 产品等级A级
  • DIN EN ISO 10683-2001 紧固件.非电解用锌片覆层
  • DIN EN ISO 11126-1-1997 涂装油漆和有关产品前钢材预处理　喷射清理用非金属磨料的技术要求第1部分：总体介绍和分类(包括技术勘误1 )
  • DIN EN ISO 11126-10-2005 涂料及有关产品使用前对钢底衬的制备.非金属喷沙清理磨料规范.第10部分石榴石
  • DIN EN ISO 11126-3-1997 涂装油漆和有关产品前钢材预处理　喷射清理用非金属磨料的技术要求第3部分：铜精炼渣
  • DIN EN ISO 11126-4-1998 涂装油漆和有关产品前钢材预处理　喷射清理用非金属磨料的技术要求第4部分：煤炉渣
  • DIN EN ISO 11126-5-1998 涂装油漆和有关产品前钢材预处理　喷射清理用非金属磨料的技术要求第5部分：镍精炼渣
  • DIN EN ISO 11126-6-1997 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 6 Iron furnace slag
  • DIN EN ISO 11126-7-1999 涂装油漆和有关产品前钢材预处理　喷射清理用非金属磨料的技术要求第7部分：熔融氧化铝
  • DIN EN ISO 11126-8-1997 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 8 Olivine sand
  • DIN EN ISO 11126-9-2005 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 9 Staurolite
  • DIN EN ISO 11290-1
  • DIN EN ISO 11885-1998 ENG
  • DIN EN ISO 12944-7-1998 ENG
  • DIN EN ISO 14501-2008 乳和乳粉 黄曲霉素M1含量的测量 免疫亲和层析净化高效液相色谱法
  • DIN EN ISO 1461-1999
  • DIN EN ISO 16584-2003 开口型盘头抽芯盲铆钉.NiCu-St或NiCu-SSt
  • DIN EN ISO 17070-2007 ENG
  • DIN EN ISO 17132-2008 Paints and varnishes - T-bend test (ISO 17132-2007); German version EN ISO 17132-2007
  • DIN EN ISO 1716-2002 建筑产品对火焰试验的反应.燃烧热的测定 (Reaction to fire tests for building products - Determination of the heat of combustion
  • DIN EN ISO 18265-2004 金属材料.硬度值的换算
  • DIN EN ISO 18279-2004 铜焊.铜焊接头的缺陷
  • DIN EN ISO 3167-1997 塑料--多用途试样
  • DIN EN ISO 3262-12-2002 涂料用填充剂 规范和测试方法 第12部分：白云母
  • DIN EN ISO 3262-22-2002 Extenders for paints - Specifications and methods of test - Part 22 Flux-calcined kieselguhr
  • DIN EN ISO 3549-2002 色漆用锌粉颜料.规范和试验方法
  • DIN EN ISO 3677-1995 软钎焊、铜焊和硬焊用填充金属.标识
  • DIN EN ISO 3887-2003 钢 脱碳层深度的测定
  • DIN EN ISO 4589-2-2006 塑料 以氧指数测定其易燃性 第2部分：环境-温度试验
  • DIN EN ISO 4762-2004 内六角圆柱头螺钉
  • DIN EN ISO 5817-2003 中文版 钢、镍、钛及其合金熔焊接头（不包括电子束焊接）缺陷的质量等级
  • DIN EN ISO 6270-2-2005
  • DIN EN ISO 6947-1997 Welds-Working positions Definitions of angles of slope and rotation
  • DIN EN ISO 7751-1997
  • DIN EN ISO 8256-2005 塑料 冲击拉伸强度测定
  • DIN EN ISO 8495-2004 金属材料管材环形扩口试验方法
  • DIN EN ISO 9227-2006
  • DIN IEC 60413-1980 ENG
  • DIN IEC 61906-2008 Procedure for the declaration of materials in products of the electrotechnical and electronic industry
  • DIN ISO 10447-1994 焊接.点焊.凸焊和有缝焊的剥离和凿剥离试验 Welding - Peel and chisel testing of resistance spot, projection and seam welds; identical with ISO 10447-1991
  • DIN ISO 10823-2001 中文版 滚子链传动选择指导
  • DIN ISO 11634-1997 ENG
  • DIN ISO 12128-1998 滑动轴承.润滑孔,润滑槽和润滑衬套.轴承套的尺寸,类型,标识以及应用
  • DIN ISO 13655-2000 制图技术.制图艺术成像用光谱测量和比色计算 Graphic technology - Spectral measurement and colorimetric computation for graphic arts images (ISO 136551996)
  • DIN ISO 13715-2000 ENG
  • DIN ISO 19499-2008 Mechanical vibration –Balancing –Guidance on the use and application of balancing standards
  • DIN ISO 22188-2008 Monitoring for inadvertent movement and illicit trafficking of radioactive material
  • DIN ISO 2768-1-1991
  • DIN ISO 4649-2006 ENG
  • DIN ISO 5755-2004-11金属烧结需求Sintermetalle Anforderungen（德文）
  • DIN ISO 6370-1-1995 Vitreous and porcelain enamels - Determination of the resistance to abrasion - Part 1 Abrasion testing apparatus
  • DIN ISO 6370-2-1995 釉瓷和搪瓷.耐磨性测定.第2部分表层耐磨后质量的损失
  • DIN ISO 7736-1985 道路车辆.前端安装的汽车无线电接收机.包括连接装置的装配空间
  • DIN ISO 8015-1986
  • DIN ISO12240-1-1999 关节轴承.第1部分径向关节轴承
  • DIN ISO12240-4-1999 关节轴承.第4部分径向关节轴承杆端
  • DIN ISO93-1-2001
  • DIN ISO93-2-2001
  • DIN V 19580-2003 车辆和人行区排水通道.抗风化、单位面积质量和第三方控制
  • DIN V VDE0832-300-2005
  • DIN V17006-100-1999 材料牌号表示方法
  • DIN VDE 0117-1991
  • DIN VDE 0281最新德国标准汇编(中文版)
  • DIN VDE 0620-1-2002 中文版 家用和类似用途的插头插座
  • DIN VDE0816-1-1988
  • DIN VDE0816-2-1988
  • DIN-5406-1993
  • DIN-8912-1990
  • DIN-EN-ISO-GB标准件对照表
  • DIN-EN14218-2003 六角法兰面螺母.细牙螺纹
  • DIN10955-2004
  • DIN17480-1992阀门材料 交货技术条件
  • DIN2448-81
  • DIN2458-81
  • DIN2505_V-1986
  • DIN2527Blind-Flanges
  • DIN2559-4-1994
  • DIN2559[1].3-1990
  • DIN2633-1998中
  • DIN2633
  • DIN2638
  • DIN2652-Loose Flange
  • DIN71752-1994
  • DIN71802-1992
  • DINV 53160-1-2002
  • DINV 53160-2-2002
  • DIN_2605-1_1991-02_e
  • DIN_2605-2_1995-06_e
  • DIN_2616-1_1991-02_e
  • DIN_2616-2_1991-02_e
  • DIN_28180-1985
  • DIN_EN_10253-1_English
  • DIN_EN_10253-2
  • DIN_EN_10253-3
  • DIN_EN_10253-4
  • DIN_VDE 0198-1999
  • DIN_VDE 0276 TEIL 620 1996
  • DIN_VDE 0293-1990
  • BS 4568-1970 中文版 电气装置用有ISO形式公制螺纹的导管和配件的技术条件
  • BS 4568-2-1970 电气装置用ISO型米制螺纹钢导管及配件规范.第2部分配件与零部件Specification for steel conduit and fittings with metric threads of ISO form for electrical installations. Fittings and components
  • BS 4569-1983 Method of test for Ignitability (surface flash) of pile fabrics and assemblies having pile on the surface
  • BS 4570-1985 Fusion welding of steel castings
  • BS 4573-1970 Specification for 2-pin reversible plugs and shaver socket-outlets
  • BS 4576-1-1989 未增塑聚氯乙烯(PVC-U)雨水管件和附件规范.半圆形天沟和圆截面管
  • BS 4577-1970 电阻焊电极和辅助设备用材料规范
  • BS 4584-102.13 Metal-clad base materials for printed circuits
  • BS 4584-103.2-1990 IEC 60249-3-3-1991 Metal-clad base materials for printed wiring boards
  • BS 4584-103.3-1992 IEC 60249-3A-1976 Metal-clad base materials for printed wiring boards
  • BS 4584-13-1977 Metal-clad base materials for printed circuits
  • BS 4584-15-1978 Metal-clad base materials for printed circuits
  • BS 4584-5-1972 Metal-clad base materials for printed circuits
  • BS 4584-6-1972 Metal-clad base materials for printed circuits
  • BS 4585-11-1983(ISO 5567-1982) Methods of test for spices and condiments. Determination of volatile organic sulphur compounds in dehydrated garlic
  • BS 4592-0-2006 Industrial type flooring and stair treads. Common design requirements and recommendations for installation
  • BS 4592-1-2006 Industrial type flooring and stair treads. Metal open bar gratings - Specification
  • BS 4592-4-2006 Industrial type flooring and stair treads. Glass reinforced plastics (GRP) open bar gratings. Specification
  • BS 4592-5-2006 Industrial type flooring and stair treads. Solid plates in metal and glass reinforced plastics (GRP) - Specification
  • BS 4604-1-1970 HSFG Bolts
  • BS 4604-2-1970 HSFG Bolts
  • BS 4607-1-1984 电气装置用非金属导管及接头规范 第1部分 绝缘材料接头和元件规范
  • BS 5345-6-1978 Code of practice for selection,installation and maintenance of electrical apparatus for use in potentially explosive atmospheres. Recommendations for type of protection
  • BS 5345-8-1980 Code of practice for selection,installation and maintenance of electrical apparatus for use in potentially explosive atmospheres
  • BS 6100-1.1-1987 Glossary of building and civil engineering terms. General and miscellaneous. Types of building
  • BS 6100-1.2-1992 Glossary of building and civil engineering terms. Spaces
  • BS 6100-1.3.0-1991 Glossary of building and civil engineering terms. General and miscellaneous. Parts of construction works. External works
  • BS 6100-1.3.6-1991 Glossary of building and civil engineering terms. General and miscellaneous. Parts of construction works. Jointing products, builders' hardware and accessories
  • BS 6100-1.5.1-1999 Glossary of building and civil engineering terms. General and miscellaneous. Operations. Associated plant and equipment. Co-ordination of dimensions. Tolerances and accuracy
  • BS 6100-1.5.2-1987 Glossary of building and civil engineering terms. General and miscellaneous. Operations. Associated plant and equipment. Jointing
  • BS 6100-1.6-1985 Glossary of building and civil engineering terms. General and miscellaneous. Persons
  • BS 6100-1.7.1-1986 Glossary of building and civil engineering terms. General and miscellaneous. Characteristics and performance. Performance
  • BS 6100-1.7.2-1989 Glossary of building and civil engineering terms. General and miscellaneous. Characteristics and performance. Characteristics
  • BS 6100-2-2007 Building and civil engineering – Vocabulary – Part 2 Spaces, building types, environment and physical planning
  • BS 6100-2-3-1992 建筑及土木工程术语词汇.第2部分土木工程.第3节下部结构.桥.大跨度结构
  • BS 6100-2.2.3-1990 Glossary of building and civil engineering terms. Tunnels
  • BS 6100-2.4.1-1992 Glossary of building and civil engineering terms. Highway engineering
  • BS 6100-2.4.2-1988 Glossary of building and civil engineering terms. Railway engineering
  • BS 6100-2.4.3-1992 Glossary of building and civil engineering terms. Airport engineering
  • BS 6100-2.5-1991 Glossary of building and civil engineering terms. Civil engineering. Hydraulic engineering and construction work
  • BS 6100-2.6-2005 Glossary of building and civil engineering terms. Civil engineering. Inland waters, coastal and maritime engineering
  • BS 6100-2.7-1992 Glossary of building and civil engineering terms. Civil engineering. Public health. Environmental engineering
  • BS 6100-3-2007 Building and civil engineering - Vocabulary. Civil engineering - General
  • BS 6100-4-2008 Building and civil engineering – Vocabulary – Part 4 Transport
  • BS 6100-4.4-1992 Glossary of building and civil engineering terms. Forest products. Carpentry and joinery
  • BS 6100-5-2009 Building and civil engineering – Vocabulary Part 5 Civil engineering – Water engineering, environmental engineering and pipelines
  • BS 6100-5.1-1992 Glossary of building and civil engineering terms. Masonry. Terms common to masonry
  • BS 6100-6-2008 Building and civil engineering – Vocabulary – Part 6 Construction parts
  • BS 6100-6.1-1984 Glossary of building and civil engineering terms. Concrete and plaster. Binders
  • BS 6100-6.5-1987 Glossary of building and civil engineering terms. Concrete and plaster. Formwork
  • BS 6100-7-2008 Building and civil engineering vocabulary. Services
  • BS 6100-9-2007 Building and civil engineering – Vocabulary – Part 9 Work with concrete and plaster
  • BS 6101-5-1992(ISO 3408-2-1991) Machine tool ball screws — Part 5 Specification for nominal diameters and nominal leads
  • BS 6102-1-1992 自行车.第1部分安全性要求规范
  • BS 6102-14-1991 自行车.第14部分有方头配件的底托架轴和曲柄组件尺寸规范
  • BS 6102-3-1986 Cycles
  • BS 6102-8-1990 自行车.第8部分自行车轴套上装配飞轮用的螺纹规范
  • BS 6104-1-1981 Mechanical Properties of Fasteners Part 1 Bolts, Screws and Studs - Discuz! Board
  • BS 6104-2-1983 Mechanical Properties of Fasteners Part 2 Nuts with Specified Proof Load Values - Discuz! Board
  • BS 6104-3-1981 Mechanical properties of fasteners. Part 3 Specification for set screws and similar threaded fasteners not under tensile
  • BS 6105-1981 3506-1979 specification for corrosion-resistant stainless steel fasteners
  • BS 6121-1-1989 Mechanical cable glands. Specification for metallic glands
  • BS 6121-5-1993 Mechanical cable glands. Code of practice for selection, installation and inspection
  • BS 6121.2-1989 Mechanical cable glands Part2 Specification for polymeric glands
  • BS 6150-1991 Code of practice for painting of buildings
  • BS 6161-18-1991 铝及铝合金阳极氧化镀层试验方法.第18部分表面耐磨性测定
  • BS 6166-3-1988 起重吊索.多用途起重吊索选择及安全指南
  • BS 6172-2004 Installation and maintenance of domestic gas cooking appliances (2nd and 3rd family gases) — Specification
  • BS 6180-1995 Code of practice for Barriers in and about buildings
  • BS 6187-2000 建筑物拆除实用规程
  • BS 6195-2006 Electric cables - rubber or silicone rubber insulated flexible cables and cords for coil end leads
  • BS 6200-1-1991 铁、钢和其他黑色金属的抽样与分析法.第1部分 前言和目录
  • BS 6231-2006 Electric cables. Single core PVC insulated flexible cables of rated voltage 6001000 V for switchgear and controlgear wiring
  • BS 6237-1982 Method for Grading and visual classification for muscovite mica splittings
  • BS 6258-1988 Specification for hollow steel bars for machining
  • BS 6262-1-2005 Glazing for buildings
  • BS 6262-1982 Code of practice for glazing for buildings
  • BS 6262-2-2005 Glazing for buildings
  • BS 6262-3-2005 Glazing for buildings
  • BS 6262-4-2005 Glazing for buildings
  • BS 6262-6-2005 Glazing for buildings
  • BS 6262-7-2005 Glazing for buildings
  • BS 6271-1982 Specification for miniature hacksaw blades
  • BS 6282-1-1982 —evices with moving parts for the prevention of contamination of water by backflow— Part 1 Specification for check valves of nominal size up to and including —N 54
  • BS 6290-4-1997 铅酸固定电池和电池组.阀门调节类型分类规范
  • BS 6293-1-1994 Aerospace. MJ threads. General requirements
  • BS 6293-2-1994 Aerospace. MJ threads. Limit dimensions for bolts and nuts
  • BS 6293-3-1994 Aerospace. MJ threads. Limit dimensions for fittings for fluid systems
  • BS 6297-2007 Code of practice for the design and installation of drainage fields for use in wastewater treatment
  • BS 6312-1-1994 Connectors for analogue telecommunication interfaces. Specification for plugs
  • BS 6312-1985 模拟电信接口联接器.插头规范
  • BS 6312-2.1-1994 Connectors for analogue telecommunication interfaces. Sockets for use with plugs specified in
  • BS 6312-2.2-1997 Connectors for analogue telecommunication interfaces. Sockets for use with plugs specified in
  • BS 6319-2-1983 Testing of resin compositions for use in construction — Part 2 Method for measurement of compressive strength
  • BS 6341-1983 Fabrics for camping tents
  • BS 6346-1997 Electric cables. PVC insulated, armoured cables for voltages of 6001000 V and 19003300 V
  • BS 6349-1-1984 Maritime Structures - General Criteria - Incorporates amendments
  • BS 6349-1-1991 中文版 海工建筑物--总则
  • BS 6349-1-2000 海上建筑物.通用标准的实施规程
  • BS 6349-2-1988 Maritime structures. design of quay walls, jetties and dolphins
  • BS 6349-3-1988 Maritime structures. design of dry docks, locks, slipways and shipbuilding berths, shiplifts and dock and lock gates
  • BS 6349-4-1994 中文版 海工建筑物--第4部分护舷和系泊装置的设计
  • BS 6349-4：1994 Maritime structures. Design of fendering and mooring systems
  • BS 6349-6：1989 Maritime structures. Design of inshore moorings and floating structures
  • BS 6349-8-2007 Maritime structures
  • BS 6349-8：2007 Maritime structures - Part 8： Code of practice for the design of Ro-Ro ramps, linkspans and walkways
  • BS 6360-1991 绝缘电缆的导体
  • BS 6362-1990 Specification for stainless steel tubes suitable for screwing in accordance with
  • BS 6363-1983 Specification for welded cold formed steel structural hollow sections
  • BS 6364-1984 阀门标准 Specification for Valves for cryogenic service
  • BS 6364-1998 中文版 低温阀门
  • BS 6374-2-1984 加工工业用聚合材料设备衬套.第2部分非热塑性塑料片制衬套规范
  • BS 6374-3-1984 加工工业用聚合材料设备衬套.第3部分烘干热固性树脂衬套规范
  • BS 6374-5-1985 加工工业用聚合材料设备衬套.第5部分橡胶制衬套规范
  • BS 6375-1-2004 门窗的性能.防风雨性的分类、选择指南和规范Performance of windows and doors - Classification for weathertightness and guidance on selection and specification
  • BS 6375-1-2009 Performance of windows and doors – Part 1 Classification for weathertightness and guidance on selection and specification
  • BS 6375-2-1987 Performance of windows - Specification for operation and strength characteristics
  • BS 6375-2-2009 Performance of windows and doors. Classification for operation and strength characteristics and guidance on selection and specification
  • BS 6387-1994 在着火状态下能保证电路工作的电缆的性能要求规范(英文)
  • BS 6396-2008 办公家具和教育用家具中的电气系统.规范
  • BS 6399-1-1996 Loading for buildings
  • BS 6399-2-1997 中文版 建筑荷载 第二部分 风荷载
  • BS 6399-3-1988 中文版 建筑荷载－第三部分-强制屋面荷载规范
  • BS 6400-3-2007 Specification for installation, exchange, relocation and removal of gas meters with a maximum capacity not exceeding 6 m3h – Part 3 Low and medium pressure (3rd family gases)
  • BS 6404-13-1996 Magnetic materials — Part 13 Methods of measurement of density, resistivity and stacking factor of electrical steel sheet and strip
  • BS 6405-1984 Specification for non-calibrated short link steel chain (grade 30) for general engineering purposes class 1 and 2
  • BS 6423-1983 电压达到和等于650V的电气开关设备和控制装置维修实用规程
  • BS 6431-1-1983 Ceramic floor and wall tiles part 1 Specification for classification and marking, including definitions and characteristics
  • BS 6431-15-1983 地面瓷砖和墙面瓷砖.第15部分线性热膨胀的测定方法
  • BS 6431-2-1984 地面瓷砖和墙面瓷砖.第2部分低吸水率的挤压成形瓷砖规范.A1类
  • BS 6431-3-3.1-1986 Ceramic floor and wall tiles part 3 Section 3.1
  • BS 6431-3-3.2-1986 Ceramic floor and wall tiles part 3 Section 3.2
  • BS 6431-4-4.1-1986
  • BS 6431-4-4.2-1986 Ceramic floor and wall tiles
  • BS 6435-1984 变压器与电抗线圈的高压电缆干燥端子用未充填护套规范
  • BS 6443-1984 Method for penetrant flaw detection. This Standard is part of the British Standards Online Service brought to you via IHS
  • BS 6446-1997 木材和木质板制品胶合构件的制作规范
  • BS 6453-1984 服装用皮革性能规范
  • BS 6463-1-1984 Quicklime. hydrated lime and natural calcium carbonate - Methods for physical testing
  • BS 6463-102-2001 生石灰、熟石灰与天然碳酸钙.化学分析方法
  • BS 6463-2-1984 Quicklime, hydrated lime and natural calcium carbonate. Methods of chemical analysis.
  • BS 6463-4-1987 Quicklime. hydrated lime and natural calcium carbonate. Methods of test for physical properties of hydrated lime and lime putty
  • BS 6464-1984 制炼厂用增强塑料管、配件和接头规范 Specification for reinforced plastics pipes, fittings and joints for process plants
  • BS 6465-1-1994 Sanitary installations. Code of practice for scale of provision, selection and installation of sanitary appliances
  • BS 6469 Sec 1.1-1992 Insulating and sheathing materials of electric cables. Methods of test for general application.
  • BS 6469 Sec 1.2-1992 Insulating and sheath- ing materials of elec- tric cables Part 1—. Methods of test for general application
  • BS 6469 Sec 1.3-1992 Insulating and sheath- ing materials of electric cables Part 1—. Methods of test for general application
  • BS 6469 Sec 1.4-1992 Insulating and sheathing materials of electric cables. Methods of test for general application. Tests at low temperature
  • BS 6469 Sec 2.1-1992 Insulating and sheathing materials of electric cables. Methods of test specific to PVC compounds
  • BS 6469 Sec 3.1-1992 Insulating and sheathing materials of electric cables. Methods of test specific to PVC compounds
  • BS 6469 Sec 3.2-1992 Insulating and sheathing materials of electric cables. Methods of test specific to PVC compounds. Loss of mass test
  • BS 6469 Sec 4.1-1992 Insulating and sheathing materials of electric cables. Methods of test specific to polyethylene and polypropylene
  • BS 6469 Sec 4.2-1992 Insulating and sheathing materials of electric
  • BS 6469 Sec 5.1-1992 Insulating and sheathing materials of electric
  • BS 6469 Sec 98.1-1996 Insulating and sheathing materials of electric cables
  • BS 6469 Sec 99.2-1992 电缆的绝缘和护套材料.第99部分用于英国的试验方法
  • BS 6469-99.1-1992 电缆的绝缘和护套材料.第99部分用于英国的试验方法,但不规定在BS 6469 Pt.1 至 Pt.5中.第1节非电子试验
  • BS 6472-1-2008 人体暴露于建筑物振动的评估指南.除爆破以外的振动源
  • BS 6472-1992 Guide to evaluation of human exposure to vibration in buildings (1 Hz to 80 Hz)
  • BS 6472-2-2008 Guide to evaluation of human exposure to vibration in buildings Part 2z Blast-induced vibration
  • BS 6485-1999 悬吊式动力线用聚氯乙烯覆盖导体
  • BS 6490-1984 Specification for shapes and dimensions (excluding thread dimensions) of plough bolt heads for earth-moving machinery
  • BS 6496-1984 Coverings and surface finishes; Surface finishes; Powder coatings; Materials; Metal sections other items; Aluminium
  • BS 6500-2000 Electric cables
  • BS 6501-1-2004 金属软管组件.波纹形软管组件的构造和使用指南Metal hose assemblies. Guidance on the construction and use of corrugated hose assemblies
  • BS 6501-2-1991 Flexible metallic hose assemblies. Specification for strip wound hoses and hose assemblies
  • BS 6510-1984 Specification for steel windows, sills, window boards and doors. Browse Product Family
  • BS 6527-1-1982(ISO 4572-1981) 液压传动-过滤器-测定过滤特性的多次通过法
  • BS 6558-1-1985 Optical fibres and cables. Specification for general requirements
  • BS 6564-3-1990 Polytetrafluoroethylene (PTFE) materials and products
  • BS 6566-1-1985 Plywood part 1 Specification for construction of panels
  • BS 6566-2-1985 Plywood part 2 Glossary of terms
  • BS 6566-3-1985 Plywood part 3 Specification for acceptance levels for post-manufacture batch testing including sampling
  • BS 6566-4-1985 Plywood part 4 Specification for tolerances on the dimensions of plywood panels - Discuz! Board
  • BS 6566-5-1985 Plywood part 5 Specification for moisture content
  • BS 6566-6-1985 Plywood part 6 Specification for limits of defects for the classification of plywood by appearance
  • BS 6566-7-1985 Plywood part 7 Specification for classification of resistance to fungal decay and wood borer attack
  • BS 6566-8-1985 Plywood part 8 Specification for bond performance of veneer plywood
  • BS 6577-1985 Specification for mastic asphalt for building (natural rock asphalt aggregate)
  • BS 6588-1996 Specification for Portland pulverized-fuel ash cements
  • BS 6593-1985 A1-2009 绞合织物和钢强化传送带的现场非机械连接的实施规程
  • BS 6607-1-1985 ISO 7388-1-1983 Tool shanks with 7 24 taper for automatic tool changers - Part 1 Specification for shanks Nos. 40, 45 and 50
  • BS 6608-1985 软垫家具用牛皮革规范
  • BS 6615-1996 Dimensional tolerances for metal and metalalloy castings(英)
  • BS 6626-1985 电压为1kV以上至36kV(含)的电气开关设备和控制装置的维护实用规程
  • BS 6648-1986 Wet ashing of textile materials for subsequent determination of metal content U—C 677.074.014.27[
  • BS 6649-1985 Specification for clay and calcium silicate modular bricks (No longer current but cited in Building Regulations)
  • BS 6651-1999 建筑物避雷装置的实施规范
  • BS 6657-1991 Guide to prevention of inadvertent initiation of electro-explosive devices by radio-frequency radiation
  • BS 6675-1986 供水设备用供水阀门(铜合金)规范
  • BS 6681-1986 Specification for malleable cast iron
  • BS 6683-1985 Guide to installation and use of valves
  • BS 6693-1-1986 Diffusible hydrogen. Method for determination of hydrogen in manual metal-arc weld metal using 3 day collection
  • BS 6693-3-1988 Diffusible hydrogen. Primary method for the determination of diffusible hydrogen in manual metal-arc ferritic steel weld metal
  • BS 6699-1992 Specification for ground granulated blastfurnace slag for use with Portland cement
  • BS 6700-2006 A1-2009 建筑物和其庭园中家用供水装置的设计,安装,试验和维护
  • BS 6701-2004 Telecommunications equipment and telecommunications cabling - Specification for installation, operation and maintenance
  • BS 6708-1998 用于矿井和露天开采的软电缆
  • BS 6717-2001 Precast, unreinforced concrete paving blocks — Requirements and test methods
  • BS 6724-1997 Electric cables — Thermosetting insulated, armoured cables for voltages of 6001 000 V and 1 9003 300 V, having low emission of smoke and corrosive gases when affected by fire
  • BS 6739-2009 Code of practice for instrumentation in process control systems installation design and practice
  • BS 6744-2009 Stainless steel bars for the reinforcement of and use in concrete —
  • BS 6746-1990 Specification for PVC insulation and sheath of electric cables
  • BS 6748-1986 Specification for Limits of metal release from ceramic ware, glassware, glass ceramic ware and vitreous enamel ware
  • BS 6755-1 1986
  • BS 6755-2 1987
  • BS 6798-2009 Specification for installation and maintenance of gas-fired boilers of rated input not exceeding 70 kW net
  • BS 6807-2006 Methods of test for assessment of the ignitability of mattresses, upholstered divans and upholstered bed bases with flaming types of primary and secondary sources of ignition
  • BS 6808-1-1987 坐标测量机.术语汇编
  • BS 6808-3-1989 坐标测量机.实用规程
  • BS 6829-3.1-1989, ISO 6841-1988 表面活性剂(原料)的分析.烷基苯磺酸钠.平均相对摩尔量的测定方法
  • BS 6837-1987 与1200mmx1000mm和1200mmx800mm集装箱用单位载荷标准尺寸设计有关的硬质长方形运输包装的尺寸规范
  • BS 6841-1987 Guide to measurement and evaluation of human exposure to whole-body mechanical vibration and repeated shock
  • BS 6853-1999中文版 铁路客车设计和建造 火灾预防实施规范
  • BS 6859-1-1987 手术台.第1部分通用活动操作工作台规范
  • BS 6859-2-1987 手术台.第2部分通用固定支架手术工作台规范
  • BS 6862-1-1971 Specification for cables for vehicles. Cables with copper conductors
  • BS 6867-1987 电压高于36kV的电气开关维修实用规程
  • BS 6896-2005 Specification for installation of gas-fired overhead radiant heaters for industrial and commercial heating (2nd and 3rd family gases)
  • BS 6913-13-1997 运土机械的操作和维修.润滑油配件规范.油嘴类型
  • BS 6920-1-2000 通过非金属产品对水质的影响看其对接触人类用水的适用性规范
  • BS 6920-2.1-2000 通过非金属产品对水质的影响看其对接触人类用水的适用性.试验方法.取样和试验
  • BS 6920-2.2.1-2000
  • BS 6920-2.2.2-2000
  • BS 6920-2.2.3-2000
  • BS 6920-2.3-2000
  • BS 6920-2.4-2000
  • BS 6920-3-2000 Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water Part 3 High temperature tests
  • BS 6925-1988 Specification for mastic asphalt for building and civil engineering (limestone aggregate)
  • BS 6946-1988 中文版 电气安装金属管槽、电缆桥架、支撑系统的英国标准规范
  • BS 6946-1988 电气设备用金属管道电缆支撑系统规范
  • BS 6949-1991 Specification for bitumen-based coatings for cold application excluding use in contact with potable water
  • BS 6954-1-1988 建筑用公差.第1部分评估基本原则和规范的推荐标准
  • BS 6954-2-1988 建筑用公差.第2部分具有正态尺寸分布部件之间预配合的统计基础推荐标准
  • BS 6954-3-1988 建筑用公差.第3部分选择对象尺寸和预配合推荐标准
  • BS 7000-1-2008 design management systems. Guide to managing innovation
  • BS 7016-1-1988 Components and systems of reciprocating internal combustion engines
  • BS 7016-2-1988 往复式内燃机的零件部件和系统.第2部分主动齿轮的术语词汇
  • BS 7016-3-1988 往复式内燃机的零件部件和系统.第3部分阀门、凸输轴传动和驱动机构的术语词汇
  • BS 7016-4-1988 Components and systems of reciprocating internal combustion engines
  • BS 7016-5-1992 Components and systems of reciprocating internal combustion engines. Glossary of terms for cooling systems
  • BS 7016-6-1992 往复式内燃机的零部件和系统.第6部分润滑系统用术语词汇
  • BS 7016-7-1999 往复式内燃机的元件和系统.控制系统
  • BS 7016-8-1996 Components and systems of reciprocating internal combustion engines
  • BS 7016-9-1997 往复式内燃机的元件和系统.控制和监测系统
  • BS 7028-1999 Eye protection for industrial and other usesÐ Guidance on selection, use and maintenance
  • BS 7034-6-1988 Viscosity and viscometric fixed points of glass — Part 6 Method for the determination of softening point
  • BS 7044-1-1990 人工铺设运动场表面.第1部分分类和一般介绍
  • BS 7044-2-4-1989 Artificial sports surfaces. Methods of test. Methods for determination of environmental resistance (Partially superseded but remains
  • BS 7044-4-1991 Artificial sports surfaces. Specification for surfaces for multi-sports use
  • BS 7071-1992 便携式残余电流装置规范
  • BS 7076-3-1989 法兰密封垫尺寸 第3部分 非金属套密封垫规范
  • BS 7076-3-1989 法兰密封垫尺寸.第3部分非金属套密封垫规范
  • BS 7079-2009 General introduction to standards for preparation of steel substrates before application of paints and related products
  • BS 7079-C2-1989 Preparation of steel substrates before application of paints and related products. Surface roughness characteristics
  • BS 7083-1996 The accommodation and operating environment for Information Technology(IT)equipment
  • BS 7114-2-1988 Fireworks. Specification for fireworks
  • BS 7121-1-2006 起重机安全使用的实施规程.总则
  • BS 7121-11-1998 起重机安全使用实用规程.近海起重机
  • BS 7121-12-1999 起重机安全操作实施规程.救援服务车和设备.实施规程
  • BS 7121-13-2009 起重机安全使用操作规程.液压龙门吊装系统
  • BS 7121-14-2005 起重机安全操作实施规程.起重机侧臂管道敷设机
  • BS 7121-2-2003 起重机安全操作实用规程.验收、试验和检验
  • BS 7121-3-2000 起重机安全操作规程.移动式起重机
  • BS 7121-4-1997 起重机安全使用实施规程.卡车式装载机
  • BS 7121-5-2006 起重机安全使用实施规则.塔式起重机
  • BS 7130-1989 旋转电机的机械平衡规范.传动轴和设备的关键性惯例
  • BS 7140-1995 木材加工机床发出的空气传播噪声.木材加工机床的操作条件
  • BS 7158-2001 Plastics inspection chambers for drains and sewers - Specification
  • BS 7159-1989 特殊工厂或工地用玻璃纤维增强塑料管道系统的设计和建造实用规程
  • BS 7172-1989 几何特征位置、尺寸和公称形式偏差的评价指南
  • BS 7175-1989 The ignitability of bedcovers and pillows by smouldering and flaming ignition sources
  • BS 7176-1995 Specification for resistance to ignition of upholstered furniture for non-domestic seating by testing composites
  • BS 7176-2007 Specification for resistance to ignition of upholstered furniture for non-domestic seating by testing composites
  • BS 7177-1996 Specification for resistance to ignition of mattresses, divans and bed bases
  • BS 7188-1998 运动场地表面减振.性能要求和试验方法
  • BS 7197-1990 电力电缆终端连接和电压达36KV系统连接性能规范
  • BS 7209-1990 水蒸汽能渗透的衣料规范
  • BS 7211-1998 Electric cables-Thermosetting insulated,non-armoured
  • BS 7212-2006 Code of practice for the safe use of construction hoists
  • BS 7231-1-1990 从出生至16.9岁以下男孩和女孩的身体测量.第1部分表格式资料
  • BS 7231-2-1990 从出生至16.9岁以下男孩和女孩的身体测量.第2部分儿童身体尺寸推荐标准
  • BS 7253-6-1997 外科植入物.钇-稳定处理的四方形锆基陶瓷材料
  • BS 7254-1-1990 矫形外科植入物.第1部分标记、包装和标签规范
  • BS 7254-2-1990 矫形外科植入物.第2部分材料和精加工一般要求规范
  • BS 7254-4-1990 矫形外科植入物.第4部分植入物和有关组织的修补及检验推荐标准
  • BS 7254-5-1990 矫形外科植入物.第5部分钴-铬-钼合金制铸件的生产规范
  • BS 7254-6.1-1990 矫形外科植入物.第6部分锻件.第1节锻件生产规范
  • BS 7254-6.2-1990 矫形外科植入物.锻件.锻件规定方法
  • BS 7255-2001 Code of practice for Safe working on lifts
  • BS 7263-1-1994 Precast concrete flags, kerbs, channels, edgings and quadrants part 1. Specification
  • BS 7268-1990 液压气动系统金属蓄压壳体疲劳压力强度值的测定方法
  • BS 7272-1-2000 书写和标记仪器.安全帽规范
  • BS 7272-1-2008 Writing and marking instruments – Part 1 Specification for caps to reduce the risk of asphyxiation
  • BS 7272-2-2008 Writing and marking instruments. Specification for end closures to reduce the risk of asphyxiation
  • BS 7273-1-2006 Code of practice for the operation of fire protection measures. Electrical actuation of gaseous total flooding extinguishing systems
  • BS 7273-4-2007 Code of practice for the operation of fire protection measures – Part 4 Actuation of release mechanisms for doors
  • BS 7273-5-2008 Code of practice for the operation of fire protection measures. Electrical actuation of watermist systems
  • BS 7291-2-2006 Thermoplastics pipes and associated fittings for hot and cold water for
  • BS 7315-1990 A1-1993 充气式高压开关装置和控制装置用锻铝和铝合金壳体的规范
  • BS 7324-1990 ISO 7000-1989 设备用图形符号指南
  • BS 7334-2-1990 建筑施工用测量器具.第2部分 使用中精度的测定方法 卷尺(En)
  • BS 7350-1990 —ouble regulating globe valves and flow measurement devices for heating and chilled water systems
  • BS 7354-1990 高压敞开式接线站设计实用规程
  • BS 7361-1-1991 Cathodic protection. Code of practice for land and marine applications
  • BS 7368-1990 Babies’ elastomeric feeding bottle teats
  • BS 7371-1-1991 金属紧固件涂层.一般要求和选择指南规范
  • BS 7371-1-2009 金属紧固件涂层.一般要求和选择指南规范
  • BS 7371-10-1994 金属紧固件涂层.第10部分有机涂层规范, Coatings on metal fasteners - Specification for organic coatings
  • BS 7371-11-1993 金属紧固件镀层.第11部分非电解镀敷锌粉凝固镀层规范,
  • BS 7371-12-2008 金属紧固件涂层.英制紧固件的要求
  • BS 7371-2-1993 金属紧固件上的涂层.扭矩夹紧力关系式规范
  • BS 7371-3-1993 Coatings on metal fasteners. Specification for electroplated zinc and cadmium coatings.
  • BS 7371-3-2009 金属紧固件镀层.电镀锌规范
  • BS 7371-4-1994 金属紧固件涂层.第4部分电镀镍、镍铬和铜镍铬涂层规范. Coatings on metal fasteners - Specification for electroplated nickel,
  • BS 7371-6-1998 金属紧固件涂层.热浸镀锌涂层的规范, Coatings on metal fasteners - Specification for hot dipped galvanized coatings
  • BS 7371-7-1994 Coatings on metal fasteners. Specification for mechanically applied zinc coatings
  • BS 7371-8-1998 Coatings on metal fasteners. Specification for sherardized coatings
  • BS 7371-9-1996 Coatings on metal fasteners. Specification for phosphate or phosphate and oil coatings.
  • BS 7376-2004 Inclusion of glass in the construction of tables or trolleys — Specification ICS 97.140
  • BS 7376-2009 Inclusion of glass in the construction of tables and trolleys for domestic use – Specification
  • BS 7385-2-1993 建筑物振动评估和测量.地面振动破坏等级指南
  • BS 7390-1990(ISO 6079-1990) Specification for instant tea. This Standard is part of the British Standards Online Service brought to you via IHS
  • BS 7398-1991 Hand hacksaw frames
  • BS 7409-1996 Wheeled child conveyances
  • BS 7412-2002 Plastics windows made from unplasticized polyvinyl chloride (PVC-U) extruded hollow profiles — Specification
  • BS 7412-2007 Specification for windows and doorsets made from unplasticized polyvinyl chloride (PVC-U) extruded hollow profiles
  • BS 7419-1991 Specification for Holding down bolts
  • BS 7423-1999 Specification for safety requirements for children's travel cots of internal base length not less than 900 mm
  • BS 7430-1998 Code of practice for earthing
  • BS 7435-1990 Nominal lengths of bolts,screws and studs,and thread lengths for general purpose bllts
  • BS 7438-1991 Steel and copper alloy wafer check valves, single disk, spring-loaded type
  • BS 7448-1-1991 Fracture mechanics toughness tests Part 1. Method4determination of KIc,critical CTO—&critical J values of metallic
  • BS 7448-2-1997 Fracture mechanics toughness tests. Method for determination of KIc, critical CTO— and critical J values of welds in metallic
  • BS 7448-4-1997 Fracture mechanics toughness tests. Method for determination of fracture resistance curves and initiation values for stable
  • BS 7450-1991 动力电缆尺寸最经济值测定方法
  • BS 7461-1991 Specification for electrically operated automatic gas shut-off valves fitted with throughput adjusters, proof of closure switches
  • BS 7475-1991 Specification for fusion welding of austenitic stainless steels
  • BS 7477-1991 IEC 416-1988 ISO 3461-1-1988 Guide for General principles for the creation of graphical symbols for use on equipment —(Implementation of CENELEC HD 571 S1)
  • BS 7479-1991 中文版 人造环境下的盐雾试验
  • BS 7479-1991 人造大气中耐盐雾腐蚀试验
  • BS 7529-1991 活性干燥粘土规范
  • BS 7531-1992 Specification for compressed non-asbestos fibre jointing
  • BS 7533-1-2001 用粘土、天然石或混凝土铺筑材料建造的路面.粘土铺筑材料或预制混凝土铺筑块的重型路面结构的结构设计指南
    • [2013年02月更新标准免费下载] |　 19876   首页 上一页 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 下一页 尾页

    返回标准资料网首页|www.PV265.com